Weighing: The scale's essential weighing function is fast, accurate, and easy to use. Basic weighing operates with nine weighing units, and the process is equipped with all necessary features such as the Initial Zero and the Automatic Zero Setting Mechanisms. The NET indicator lets the user identify that a Tare has been taken, while the capacity indicator assists the user in performing weighing operations. Printed weighing results include GLP data as well as the date and time.
Density: The density calculation feature is used to assist in the calculation of density in solids and liquids. A TORBAL Density Kit (sold separately) is required to perform density calculation.
Parts Counting: Mode provides the user with an easy-to-use yet comprehensive capability for counting parts based on weight. The counting feature is designed in the form of a short wizard, which leads the user step by step through the procedure. Repetitive counting using the same average piece weight is straightforward and fast. When establishing a new average piece weight, the user is offered a choice of sample sizes ranging from 1 to 100. The feature is user-friendly, with the counting process usually taking only a few seconds to complete.
Animal Weighing: Mode provides the user with a fast, flexible, and easy-to-use capability for weighing live animals or other dynamic loads. A choice of 3 different operating modes and four weight integration periods ensures the user the best results in the least amount of time per measurement. Repetitive weighing is simple and fast, especially in the Automatic Mode, where animal weighing is initialized automatically. The scale performs an auto-tare and clears the result automatically between each weighing.
Check Weighing: This provides the user with an easily programmed, fast, and flexible way to check-weigh items. The user can use previously stored Upper and Lower limits or set a new limit range. Repetitive Check Weighing using the same Limits requires no intervention, place the unknown on the pan and read the displayed result, which is expressed ad UNDER, OVER, and ACCEPT.
Display Hold: Mode provides the user with alternative ways of locking weighing results on display. The weighing result remains closed on the show until cleared. The function works in three operating modes: automatic, semi-automatic, and manual. In the automatic mode, the weighing result is locked automatically with the highest stable weight; the scale also performs an auto-tare and clears the function.
Percent Weighing: Easy to use, flexible, and fast way to establish the relative weight of an unknown compared to that of a stored sample and expressed as a percentage. The user may opt for a stored sample weight or, with on-screen guidance, establish a new sample weight. Repetitive Percent Weighing using the exact Sample Weight requires no further intervention; simply place the unknown weight on the pan, and its importance, expressed as a percent of the Sample weight, appears on display.
Totalizing: Fast and easy way to perform functions that require the summation of sequential weights, like compounding. The user may view a running sub-total at any point in the process and the grand total at the end of the weighing sequence. The weighing sequence is rapid in the Automatic Mode as weighing results are automatically added to the whole.