Starrett 25 Dial Indicators (Inch)
The Starrett 25 Dial indicators have a shockless, hardened steel gear train and jewel bearings, except where noted. They are furnished with a lug-on-center back. Antimagnetic mechanism is optional for all models. Special non-shock mechanism is available for all models except 25-109, 25-209 and 25-116. These indicators are AGD Group 2.
Please see Starrett Indicators Catalog for additional indicator info.
Starrett 25 Dial Indicators
- Rugged and simple unit construction with a universally fitting design
- Sharp bezel serrations for positive grip
- Unbreakable crystal
- Hardened stainless steel stem (9.5mm – unless indicated)
- No-glare satin finish on case
- Hardened stainless steel rack and spindle
- Massive bridge for rigid bearing support
- Hardened stainless steel gears and pinions
- Non-reflecting white eggshell finish on dial
- Jewel Bearings (unless indicated)
- Lug On Center Back Installed, Flat Back Included
| Model | Range per Rev. | Total Range | Graduations | Reading | Notes |
| 25-109J | .006in | .015in | .00005in | 0-3-0 | - |
| 25-209J | .006in | .015in | .00005in | 0-6 | - |
| 25-111J | .010in | .025in | .0001in | 0-5-0 | - |
| 25-211J | .010in | .025in | .0001in | 0-10 | - |
| 25-511J | .010in | .200in | .0001in | 0-5-0 | - |
| 25-611J | .010in | .200in | .0001in | 0-10 | - |
| 25-131J | .050in | .125in | .0005in | 0-25-0 | - |
| 25-431J | .050in | .500in | .0005in | 0-50 | - |
| 25-631J | .050in | 1.000in | .0005in | 0-50 | - |
| 25-631J WCSC | .050in | 1.000in | .0005in | 0-50 | Case Stem Cap |
| 25-145J | .050in | .125in | .001in | 0-25-0 | - |
| 25-141J | .100in | .250in | .001in | 0-50-0 | - |
| 25-241J | .100in | .250in | .001in | 0-100 | - |
| 25-341/5J | .100in | .500in | .001in | 0-50-0 | - |
| 25-441/5J | .100in | .500in | .001in | 0-100 | - |
| 25-441/5J W/SLC | .100in | .500in | .001in | 0-100 | Certification Letter |
| 25-341J | .100in | 1.000in | .001in | 0-50-0 | - |
| 25-341J WCSC | .100in | 1.000in | .001in | 0-50-0 | Case Stem Cap |
| 25-441J | .100in | 1.000in | .001in | 0-100 | - |
| 25-441J W/SLC | .100in | 1.000in | .001in | 0-100 | Certification Letter |
| 25-441J WCSC | .100in | 1.000in | .001in | 0-100 | Case Stem Cap |
| 25-441P WCSC | .100in | 1.000in | .001in | 0-100 | Case Stem Cap, Plain Bearing |
| 25-441J-8 | .100in | 1.000in | .001in | 0-100 | 8mm Stem Diameter |