The Siglent SSA5000-AMK is the Broadcast Measurement Kit option for SSA5000A spectrum analyzers.

This option includes channel power, adjacent channel power, occupied bandwidth, total power, third order intercept and an onscreen waterfall/spectrum analysis chart.

Measure the power and power density within the specified channel bandwidth. When this function is enabled, the span and resolution bandwidth are automatically adjusted to smaller values.

Measurement Results: Channel power and power spectral density

• Channel Power: Power within the integration bandwidth
• Power Spectral Density: Power (in dBm/Hz) normalized to 1 Hz within the integration bandwidth

Measurement Parameters: Center Freq, integration bandwidth, Span, Span power

Measure the power of the main channel and adjacent channels as well as the power difference between the main channel and each of the adjacent channels. When this function is enabled, the span and resolution bandwidth of the analyzer are adjusted to smaller values automatically.

Adjacent Channel Power Measurement

• Main CH Power: Displays the power within the bandwidth of the main power
• Left channel power: Display the power of channel to the left of the main channel and the power difference between the left channel and the main channel (in dBc)
• Right channel power: Display the power of the channel to the right of the main channel and the power difference between the right channel and the main channel (in dBc)

Measurement parameters: Center frequency, main channel bandwidth, adjacent channel bandwidth and channel spacing.

Integrate the power within the whole span and calculate the bandwidth occupied by this power according to the specified power ratio. The OBW function also indicates the difference (namely “Transmit Freq Error”) between the center frequency of the channel under measurement and the center frequency of the analyzer.

OBW measurement

• Occupied Bandwidth: Integrate the power within the whole span and then calculate the bandwidth occupied by the power according to the specified power ratio
• Transmit Frequency Error: The difference between the center frequency of the channel and the center frequency of the analyzer

The system enters zero span mode and calculates the power within the time domain. The types of powers available including: Peak, Average and RMS.

• T-Power: The power of the signal from the start line to the stop line
• Measurement Parameter: Center frequency, start line, stop line

Automatic measurement of IP3 (Third-order Intercept Point), including the power of the fundamental wave and the Third order in the power domain. Calculate the adjustable Intercept Point.

Display the power of scanned spectra using color grading as well as collect a “waterfall” chart showing successive scans with respect to time.