| I2C serial triggering and decoding |
| Protocol configuration |
bit rate |
up to 3.4 Mbps (auto-detected) |
| auto threshold setup |
assisted threshold configuration for I2C triggering and decoding (software) |
| device list |
associate frame address with symbolic ID (software) |
| Trigger |
source (clock and data) |
any input channel or logical channel |
| trigger event setup |
start, stop, restart, missing ACK, address, data, address + data |
| address setup |
7 bit or 10 bit address (value in hex or binary); read, write or either; condition =, ≠ |
| data setup |
data pattern up to 8 byte (hex or binary); condition =, ≠; >, <; offset within frame in range from 0 byte to 4095 byte |
| Decode |
source (clock and data) |
any input channel, logical channel |
| display type |
decoded bus, tabulated list |
| color coding |
frame, start/restart, address (r/w), data, ACK/NACK, stop, error |
| address and data format |
hex, decimal, octal, binary, ASCII; symbolic names for user-defined subset of addresses (software) |
| SPI serial triggering and decoding |
| Protocol configuration |
type |
2-wire, 3-wire and 4-wire SPI |
| bit rate |
up to 50 Mbps (auto-detected) |
| bit order |
LSB first, MSB first |
| word size |
4/8/12/16/20/24/28/32 bit |
| frame condition |
SS, timeout |
| polarity (MOSI, MISO, SS) |
active high, active low |
| slope (CLK) |
rising edge, falling edge |
| auto threshold setup |
assisted threshold configuration for SPI triggering and decoding (software) |
| Trigger |
source (MOSI, MISO, SS, CLK) |
any input channel or logical channel |
| trigger event setup |
start of frame, end of frame, MOSI, MISO |
| data setup |
data pattern up to 32 bit (hex or binary); condition =, ≠; offset within frame in range from 0 to 4095 bit |
| Decode |
source (MOSI, MISO, SS, CLK) |
any input channel, logical channel |
| display type |
decoded bus, tabulated list |
| color coding |
frame start, frame stop, word, error |
| data format |
hex, decimal, octal, binary, ASCII (software) |