| Model |
T3AFG500 |
| Waveform |
Sine, Square, Ramp, Pulse, Noise, Arbitrary |
| Sine |
1 μHz - 500 MHz |
| Square |
1 μHz - 120 MHz |
| Pulse |
1 μHz - 150 MHz |
| Ramp/Triangular |
1 μHz - 5 MHz |
| Gaussian white noise |
500 MHz (-3 dB) |
| Arbitrary |
1 μHz - 50 MHz |
| Resolution |
1 μHz |
| Accuracy |
10-year aging +/- 3.5 ppm at 25 Degrees C |
| Harmonic Distortion (0 dBm) |
DC - 1 MHz, ≤ -65 dBc
1 MHz - 60 MHz, ≤ -60 dBc
60 MHz - 100 MHz, ≤ -50 dBc
100 MHz - 200 MHz, ≤ -40 dBc
200 MHz - 300 MHz, ≤ -30 dBc
> 300 MHz, ≤ -28 dBc |
| Total harmonic distortion. |
0.075 %, 0 dBm, 10 Hz - 20 kHz |
| Spurious signal (non-harmonic) |
DC ≤ 350 MHz ≤ -60 dBc
> 350 MHz ≤ -55 dBc |
| Maximum Amplitude Output |
≤ 40 MHz: 10 Vpp at 50 Ω, 20 Vpp at HiZ
40 MHz - 120 MHz: 5 Vpp at 50 Ω, 10 Vpp at HiZ
120 MHz - 160 MHz: 2.5 Vpp at 50 Ω, 5 Vpp at HiZ
160 MHz - 350 MHz: 1.5 Vpp at 50 Ω, 3 Vpp at HiZ
> 350 MHz: 640 mVpp at 50 Ω, 1.28 Vpp at HiZ
(Minimum amplitude output 1 mVpp at 50 Ω, 2 mVpp at HiZ, all ranges) |
| Rise/Fall Time (10 % - 90 %) |
2.4 ns (1 Vpp, 50 Ω Load) |
| Overshoot |
3 % (typical, 100 kHz, 1 Vpp, 50 Ω Load) |
| Duty Cycle |
10 % - 90 %, Limited by frequency setting |
| Jitter (rms) cycle to cycle |
100 ps, 1 Vpp, 50 Ω Load |
| Maximum Amplitude Output |
≤ 20 MHz: 10 Vpp at 50 Ω, 20 Vpp at HiZ
> 20 MHz: 5 Vpp at 50 Ω, 10 Vpp at HiZ
(Minimum amplitude output 1 mVpp at 50 Ω, 2 mVpp at HiZ, all ranges) |
| Pulse width (Accuracy +/- (0.01 % + 0.3 ns)) |
3.3 ns |
| Rise/Fall Time (10 % ~ 90 %,typical) |
1 ns - 75 s |
| Pulse Width Adjustment Resolution |
100 ps |
| Duty Cycle |
0.001% ~ 99.999 %, 0.001% Resolution, Limited by frequency setting |
| Overshoot |
3 % (typical, 100 kHz, 1 Vpp, 50 Ω Load, 2 ns edge) |
| Jitter (rms, cycle to cycle) |
100 ps, 1 Vpp, 50 Ω Load |
| Maximum Amplitude Output, ≥ 10 ns width, 2 ns edge |
≤ 20 MHz: 10 Vpp at 50 Ω, 20 Vpp at HiZ
20 MHz - 120 MHz: 5 Vpp at 50 Ω, 10 Vpp at HiZ
> 120 MHz: 2.5 Vpp at 50 Ω, 5 Vpp at HiZ
(Minimum amplitude output 1 mVpp at 50 Ω, 2 mVpp at HiZ, all ranges) |
| Linearity |
≤ 1% of Vpp (typical, 1 kHz, 1 Vpp, 50 % symmetry) |
| Symmetry |
0 % - 100 % |
| Maximum Amplitude Output |
10 Vpp at 50 Ω, 20 Vpp at HiZ
(Minimum amplitude output 1 mVpp at 50 Ω, 2 mVpp at HiZ, all ranges) |
| Order |
10 Maximum |
| Type |
Even, Odd, All |
| Waveform length |
8 - 20 M points |
| Vertical resolution |
16 bits |
| Sample rate |
300 MSa/s Arb Mode, 1.2 GSa/s DDS Mode |
| Min. Rise/Fall Time |
2.6 ns, 10 % - 90 %, 1 Vpp step signal, DDS mode |
| Jitter (rms), cycle to cycle |
100 ps, 1 Vpp, 50 Ω Load, T |
| Frequency Setting Range |
1 μHz - 50 MHz |
| Maximum Amplitude Output |
≤ 20 MHz: 10 Vpp at 50 Ω, 20 Vpp at HiZ
> 20 MHz: 5 Vpp at 50 Ω, 10 Vpp at HiZ
(Minimum amplitude output 1 mVpp at 50 Ω, 2 mVpp at HiZ, all ranges) |
| Bit Rate |
1μbps - 300 Mbps |
| Rise/Fall Time |
1 ns - 1 μs |
| Sequence Length |
2m-1 , m = 3, 4, 5, ..., 32 |
| Maximum Amplitude Output |
≤ 40 Mbps: 10 Vpp at 50 Ω, 20 Vpp at HiZ
40 Mbps - 240 Mbps: 5 Vpp at 50 Ω, 10 Vpp at HiZ
> 240 Mbps: 2.5 Vpp at 50 Ω, 5 Vpp at HiZ
(Minimum amplitude output 1 mVpp at 50 Ω, 2 mVpp at HiZ, all ranges) |
| -3 dB bandwidth |
Bandwidth of the waveform generator |
| Bandwidth Setting Range |
1 mHz - Bandwidth of the waveform generator |
| Amplitude Output Range |
1 mVrms - 542 mVrms at 50 Ω, 2 mVrms - 1.084 Vrms at HiZ (Mean = 0, BW Limit = Off) |
| Range |
-10 V to +10 V HiZ Load
-5 V to + 5 V 50 Ω Load |
| Accuracy |
+/- (1% + 2 mV) HiZ Load |
| Maximum Carrier Frequency |
500 MHz |
| Symbol Rate |
250 Symbols/s - 37.5 MSymbols/s |
| Vertical Resolution |
16 Bits |
| Output Range |
1 mVrms - 0.5 Vrms, 50 Ω Load (√I2 + Q2) |
| Modulation Type |
2ASK, 4ASK, 8ASK, BPSK, QPSK, 8PSK, DBPSK, DQPSK, D8PSK, 8QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM, 2FSK, 4FSK, 8FSK, 16FSK, MSK, MultiTone, Custom
Supported by EasyIQ software |
| Pattern |
PN7, PN9, PN15, PN23, User file, Custom |
| Accuracy |
+/- (1% + 1 mVpp) 10 kHz sine wave, 0 V offset |
| Amplitude Flatness |
+/- 0.3 dB, 50 Ω load, 0.5 Vpp (reference 1 MHz Sine wave) |
| Output impedance |
50 Ω +/- 0.5 Ω at 100 kHz Sine wave |
| Output current |
+/- 200 mA |
| Channel to channel Crosstalk |
-60 dBc, Sine, 50 Ω load |
| Current Limit Threshold |
+/- 200 mA |
| Over-Voltage protection threshold |
+/- 3.5 V: For generator amplitude output < 3.2 Vpp and DC offset < |2 VDC|
+/- 10.5 V: For generator amplitude output ≥ 3.2 Vpp and DC offset ≥ |2 VDC| |
| Carrier |
Sine, Square, Ramp, Arb |
| Modulation Source |
Internal/External |
| Modulation Wave |
Sine, Square, Ramp, Noise, Arb |
| Modulation Depth |
0 - 120 % |
| Modulation Frequency |
1 mHz - 1 MHz, Modulation source “internal” |
| Carrier |
Sine, Square, Ramp, Arb |
| Modulation Source |
Internal/External |
| Modulation Wave |
Sine, Square, Ramp, Noise, Arb |
| Modulation Depth |
0 - 0.5 * BW (BW is the max output frequency limited by the frequency settings) |
| Modulation Frequency |
1 mHz - 1 MHz, Modulation source “internal” |
| Carrier |
Sine, Square, Ramp, Arb |
| Modulation Source |
Internal/External |
| Modulating Waveform |
Sine, Square, Ramp, Arb, Noise |
| Phase Deviation |
0 Deg - 360 Deg |
| Modulation Frequency |
1 mHz - 1 MHz, Modulation source “internal” |
| Carrier |
Sine, Square, Ramp, Arb |
| Modulation Source |
Internal/External |
| Modulating Waveform |
Square with 50 % duty cycle |
| Keying Frequency |
1 mHz - 1 MHz, Modulation source “internal” |
| Carrier |
Sine, Square, Ramp, Arb |
| Modulation Source |
Internal/External |
| Modulating Waveform |
Square with 50 % duty cycle |
| Modulation Frequency |
1 mHz - 1 MHz, Modulation source “internal” |
| Carrier |
Sine, Square, Ramp, Arb |
| Modulation Source |
Internal/External |
| Modulating Waveform |
Square with 50 % duty cycle |
| Modulation Frequency |
1 mHz - 1 MHz, Modulation source “internal” |
| Carrier |
Pulse |
| Modulation Source |
Internal/External |
| Modulating Waveform |
Sine, Square, Ramp, Noise, Arb |
| Modulation Frequency |
1 mHz - 1 MHz, Modulation source “internal” |
| Carrier |
Sine, Square, Ramp, Noise, Pulse, Arb |
| Type |
Count (1-1 M cycles), Infinite, Gated |
| Carrier Frequency |
2 mHz - Maximum output frequency |
| Stop/Start phase |
0 Deg to 360 Deg |
| Internal Period |
1 µs - 1000 seconds |
| Trigger Source |
Internal, External, Manual |
| Gated Source |
Internal, External |
| Trigger Delay |
Maximum of 100 seconds |
| Carrier |
Sine, Square, Ramp, Arb |
| Type |
Linear, Log |
| Direction |
Linear: Up, Down, Up and Down. Logarithmic: Up, Down |
| Carrier Frequency |
1 µHz - Maximum output frequency |
| Sweep Time |
1 ms - 500 seconds |
| Trigger Source |
Internal, External, Manual |
| Function |
Frequency, Period, Positive / Negative Pulse Width, Duty Cycle |
| Coupling |
DC, AC, HF REJ |
| Frequency Range |
DC: 100 mHz - 400 MHz, AC: 1 Hz - 400 MHz |
| DC Input Amplitude |
100 mV rms - +/- 2.5 V < 100 MHz
200 mV rms - +/- 2.5 V 100 MHz - 200 MHz
500 mV rms - +/- 2.5 V > 200 MHz |
| AC Input Amplitude |
100 mV rms - 5Vpp < 100 MHz
200 mV rms - 5Vpp 100 MHz - 200 MHz
500 mV rms - 5Vpp > 200 MHz |
| Input Impedance |
1 MΩ |
| Frequency |
9.999 MHz - 10.001 MHz |
| Amplitude |
Minimum 1.4 Vp-p into high impedance load |
| Input Impedance |
5 kΩ |
| Frequency |
10 MHz Synchronized to the internal reference clock |
| Amplitude |
Minimum 2 Vp-p into high impedance load |
| Output Impedance |
50 Ω |
| V in Low |
-0.5 V to +0.8 V |
| V in High |
2 V to 5.5 V |
| Input Impedance |
100 kΩ |
| Minimum Pulse Width |
100 ns |
| Maximum Response Time |
100 ns - Sweep, 600 ns - Burst |
| V out Low |
Maximum 0.44 V at 8 mA |
| V out High |
Minimum 3.8 V at -8 mA |
| Output Impedance |
100 Ω |
| Maximum Frequency |
1 MHz |
| V out Low |
Maximum 0.44 V at 8 mA |
| V out High |
Minimum 3.8 V at -8 mA |
| Output Impedance |
100 Ω |
| Maximum Frequency |
10 MHz |
| Pulse Width |
26.7 ns |
| Jitter |
3.3 ns Peak to peak |
| Frequency |
0 Hz to 50 kHz |
| Input Impedance |
10 kΩ |
| Amplitude at 100% Modulation Depth |
Min 11 Vp-p, Typ 12 Vp-p, Max 13 Vp-p |
| Voltage |
100 V to 240 V (+/-10 %) at 50 Hz / 60Hz
100 V to 120 V (+/-10 %) at 400 Hz |
| Power Consumption |
Typical 32.5 W, Maximum 50 W, Dual channel, Sine, 1kHz, 10 Vpp, 50 Ω load |
| Display |
| Color Depth |
24 bit |
| Contrast Ratio |
350:1 |
| Luminance |
300 cd/m2 |
| Touch panel type |
Resistive |
| Environment |
| Operating Temperature |
0 Deg C to 40 Deg C |
| Storage Temperature |
-20 Deg C to 60 Deg C |
| Operating Humidity |
5 % to 90 % ≤ 30 Deg C | 5 % to 50 % > 30 Deg C |
| Non-Operating Humidity |
5 % to 95 % |
| Maximum Operating Altitude |
3048 m ≤ 30 Deg C |
| Maximum Non-Operating Altitude |
15000 m |
| Calibration |
| Calibration Interval |
Annually |
| Mechanical |
| Dimensions |
W x D x H = 260.3 mm x 107.2 mm x 295.7 mm |
| Net Weight |
3.5 kg |
| Gross Weight |
4.6 kg |
| Compliance |
| LVD |
IEC 61010-2:2010 |
| EMC |
EN61326-1:2013 |