Hakko 611-2 - Dual Solder Spool Stand

Recommend to a Friend

The standard solder spool holder

5.0

Since I started soldering for work and later for hobby use, the dual spool Hakko solder stand has been the standard holder that I use frequently and recommend to others. It holds both leaded type 1lb solder (Kester) with some space on both ends, and the lead free (Indium SAC305) larger spools without free space. Assembly is required as the side panels and base come flat in a box with spindles and wire guides handle. You'll need a long #2 Philips screwdriver so that the angle is mostly vertical; a stubby won't work well. I use larger diameter solder on the bottom and smaller on top because larger is harder to bend and have never had a problem with sliding or tipping while pulling. There is a small screw on the back of the base if you need to connect to an ESD workstation. I have two of these now; hope that helps you decide.

Verified Purchase RK on Jun 26, 2023 I found this helpful (1)