• IR Resolution: 384x288 px
• Temperature range: -20 – 650 C
• Refresh rate: 50 Hz
• Thermal sensitivity / NETD: <0.05°C @ 30°C / 50mK
• Field of view (FOV): 17° x 12.7°

THT600 is the new professional thermal imaging camera equipped with a high resolution 384x288pxl IR sensor. which makes it suitable for both industrial and construction use and, above all, for human temperature screening. It is equipped with two specific measurement ranges, one standard and one for Screening mode: -20 ° C ÷ 650.0 ° C and 32.0 ° C ÷ 42.0 ° C, producing high resolution thermal images and videos.

Features emissivity, reflected temperature, ambient temperature, atmospheric humidity, infrared compensation, distance compensation measurement corrections. Color palettes include iron, rainbow, white hot, black hot, brown hot, blue/red, hot/cold, feather, above max alarm, below min alarm, interval alarm. Features automatic, manual, and histogram span modes. Internal memory storage of 3.4 GB with expansion via included micro SD card for pictures, video, text notes and voice notes with on-camera report building.

Industrial application / Utility

When it comes to industrial and high voltage applications, damages from poor maintenance of corrosion over time can be severe and very costly. Inspection and troubleshooting has to be of high quality. HT advanced thermal imaging cameras are perfect for this application.

In industrial environment maintenance of pumps, electric motors, coolers, piping, filters, valves, etc. has to be frequent. HT professional and versatile thermal imaging cameras such as THT500 and THT600 are designed to satisfy the need of the most demanding professionals.

*Picture: a pipe junction shot with THT600

Monitoring of corroded and loosened electrical connections in high voltage installations is crucial, as their increased resistance could rise the temperature and melt connections.

*Picture: a high voltage insulator shot with THT600L.

Continuously growing energy consumption has a deep environmental impact. It has become essential to save the environment and prevent any energy waste. HT thermal imaging cameras help you to perform building inspections by locating heat leaks, thermal insulation defects and humidity problems.

Water can infiltrate your building damaging your property and your inventory. Identifying the source of water infiltration can be difficult. THT cameras allow you to identify, so correct, any intrusion issues that may occur.

*Picture: water leakage shot with THT300.

Thermal imaging is effective for the detection and visualization of hot and cold spots, insulation faults and a lot more. Air leakage and consequent heat loss are mostly due to bad insulation, was it damaged or insufficient, and represent a waste of energy, so money. THT cameras make building diagnostics easy, thanks to their high sensitivity up to 0,05°C.

*Picture: building insulation shot with THT600.

Installing solar panels is a long-term investment that helps cutting your electricity bills and carbon footprint. It is necessary to keep a close eye on the efficiency of your systems. With HT thermal imaging cameras you will quickly locate faults, hot spots or damaged panels, to keep your solar installation operating at its maximum performance.

Thanks to the thermographic inspection of photovoltaic systems, hot spots and loose connections can be easily detected.

*Picture: hot spots shot with THT300.

During long-term outdoor exposure, once moisture penetrates a module, it can condense and increase corrosion rates, significantly reducing the performance of the module. High resolution infrared cameras easily spot encapsulant failures.

*Picture: encapsulant failure shot with THT600