| Voltage Measurement Range |
0-30 VDC |
| Voltage Measurement Accuracy |
0-10 VDC ± 0.025% F.S.
10-30 VDC ± 0.10% F.S. |
| Current Measurement Range |
0-20 mA |
| Current Measurement Accuracy |
±0.03% F.S. |
| Resolution |
± 0.001% F.S.; 99,999 counts |
| Update Rate |
100 ms - 1 module installed
200 ms - 2 modules installed
300 ms - 2 modules installed and external voltage/current measurement input |
| Electrical Connection for voltage and current |
4 mm banana jacks. (1) set of test leads included |
| Engineering Units |
psi, inH2O, inHg, ftSW, bar, mbar, kPa, MPa, mmHg, cmH2O, mmH2O, kg/cm2, User Programmable |
Loop Power Supply
(ATE-2 ST non-I.S. version only) |
24Vdc-35mA maximum (non I.S. only) |
| Programmable Filtering |
Dampening levels 1 - 16 |
| Temperature Effect on Electrical Measurement |
±0.001% of span per F over compensated range
from reference temperature of 70°F (±3°F) |
| Field Calibration |
Base Unit and pressure
modules may be field-calibrated via keypad
commands |
| Data Logging |
• Internal storage for up to 64 data logs and up to 16,000 records; transferable to SD card
• Manual / automatic data logging capability
• Programmable data intervals (0.1 sec. to 24 hrs.) |
| Warm-up Time |
5 minutes for rated accuracy |
| Operating Temperature |
-4 to 120°F (-20 to 49°C) |
| Storage Temperature |
-4 to 158°F (-20 to 70°C) |
| Sensor Module Capacity |
Up to two AM2 pressure and temperature modules |
| LCD Display |
2.5˝ (W) x 1.5˝ (H); displays three (3) simultaneous measurements, bar graph, back light and flip-screen capability |
| Enclosure |
IP65 / NEMA4X |
| Dimensions |
8.7 in. (L) x 5.1 in. (W) x 3.8 in. (H) |
| Net Weight |
2.4 lbs without modules |
| Case Material |
High impact PC-ABS |
| Serial Interface |
USB (Micro-B connector type) |
| Agency Approvals |
All Versions
CE Mark (EMI/RFI), FCC (CFR47), UL 61010-1
ATE-2 IS Instrinsically Safe Version
(Battery Powered Only):
FM Intrinsic Safety CL 1, Div 1, Gr A, B, C, D
CSA Intrinsic Safety CL 1, Div 1, Gr A, B, C, D
ATEX Ex ia ii c T4 Ga –20°C
Note: Loop power supply is not included with Intrinsically Safe Units |
| Power Required |
(4) AA Batteries or via USB power supply
USB universal AC adapter 100-240 VAC 50/60 HZ |
| Battery Life |
Up to 40 hrs with two modules installed |
| Certification |
NIST traceable certification document provided for base unit and optional Quick-Select sensor modules |