The rugged Spectra Precision DG711 Pipe Laser is built for long lasting performance and reliability for laying pipes. The DG711 is fully waterproof and can be washed down after working in the muddiest trenches. The nickel alloy housing provides anti-corrosion protection.

Setting grade is simple. The grade can be entered directly onto the laser or via the infrared remote control. Once the grade is set it can also be locked avoiding errors by someone accidentally changing the grade. Line, set, check allows the laser to shoot the beam upwards to align up and out of the trench to the next manhole. Line scan allows the beam to sweep quickly (left and right) and can be stopped on the target using the remote control.

Line Alert can be activated once the grade and alignment are set warning the user that the set-up has been disturbed, avoiding costly errors and re-work.

The DG711 has a bright beam that can be easily spotted in the pipe and enhanced with the patented target that bends the beam upwards making it easy to see when looking down at the pipe reducing the need to bend down to see the beam when in the trench or standing above the trench.

Multiple attachments are available allowing the DG711 to be mounted in pipes of any size from 150mm (6 inch) upwards. A blower is also available to evenly circulate air through the pipe to avoid refraction of the beam inside the pipe.

SELF-LEVELING: The DG711 and DG511 feature the largest automatic leveling range in the industry providing quick, easy setups, regardless of grade. Unlike traditional pipe lasers, they eliminate the need for rough leveling and minimize crew training. Simply set up the laser in the pipe, manhole or open cut without the need to swivel or rough level the unit. No need to reset the unit or HI, over the center point when rough leveling.

LINE ALERT: This unique feature is ideal for working in high-vibration or wet conditions where the pipe lasers may be disturbed. The beam flashes to notify you that the setup line has been disturbed, eliminating the necessity of rework. Combined with the self-leveling warning, you’ll always complete the job correctly, on time and on budget! Only available on the DG711.

LINE SET: The Line Set/Check capability of the pipe laser allows you to raise the beam outside of the trench for fast line setup or checking. Raising the laser beam out of the trench to an above-ground stake saves you time instead of having to move the excavator off line during setup of the pipe laser, you can just get on with your job. In addition, the Line Set-Check feature is ideal for rechecking the line in pipe jacking puts after each push. Only available on the DG711.