• 1:64 high-speed fanout (64 output channels, 1 input channel)
• DC-coupled and AC-coupled input modes
• -10V ~ 10V input range
• -10V ~ 10V trigger level range
• Low jitter, low skew 

The SYN64 synchronization distributor is a 1:64 high-speed digital signal driver, which fan-outs the input into 64 outputs with low-jitter, low-skew. Its input offers both DC and AC coupling modes and adjustable trigger levels.

For a multi-channel acquisition system built with multiple oscilloscopes, a synchronization distributor is an essential device. Use the SYN64 as the trigger source of the oscilloscopes, connecting the outputs of the SYN64 to the EXT trigger or analog channel of the oscilloscopes to build an acquisition system. You can also use the SYN64 to calibrate the skew between channels of the acquisition system. By connecting the outputs of the SYN64 to the analog channel inputs of the oscilloscopes, you can calibrate the delay of each analog channel and cable to ensure the alignment of multiple channels.

• Multiple units are combined to create a high-speed acquisition system with up to 512 channels by being triggered with low-skew synchronization signals from the SYN64
• The host can access each unit over 1000M LAN. A complete SCPI command set as well as LabVIEW and IVI drivers are provided for easy data acquisition. The LAN port is LXI compliant.
• Sample clocks are synchronized between all units in the test system by cascading the 10 MHz In and 10 MHz Out clocks in a daisy chain