| General |
| Loop Power |
| Voltage | 24 V or 28 V, selectable |
| Maximum Current | 22 mA, short-circuit protected |
| Input Voltage | 30 VDC maximum |
| Accuracy | 5% |
| Note | A 250Ù series resistance is automatically supplied whenever looppower is enabled. |
| Ramp Functions |
| Source Functions | Voltage, current, Ohms, frequency, temperature |
| Rate | 4 steps/second |
| Trip Detect | continuity or voltage; continuity detection not available when sourcing
current |
| Data Log Function |
| Measure Functions | Voltage, current, Ohms, frequency, temperature, pressure |
| Reading Rate | 1, 2, 5, 10, 20, 30, or 60 readings/minute |
| Maximum Record Length | 8,000 readings 7,980 for 30 or 60 readings/minute |
| Environmental |
| Operating Temperature | -20 °C to +50 °C
-10 °C to +50 °C for in spec frequency and AC read |
| Storage Temperature | -20 °C to +60 °C |
| Altitude | 9,186 ft (2800 m) above mean sea level |
| Stability (90 day) | Typical 90-day measurement/read and source/simulate accuracy
can be estimated by dividing the one year “% of reading” or “% of output”
specifications by 2. Floor specifications,
expressed as “% of FS” or
“counts” or “Ohms” remain constant |
| Power Requirements | 7.2 VDC |
| Battery | NiMH rechargeable, 3500 mAH; included |
| Battery Life | >8 hours, typical usage |
| Physical |
| Dimensions | 9.3"H x 5.1"W x 2.4"D(236 x 130 x 61 mm) |
| Weight | 3 lbs, 1 oz. (1.4 kg) |
| Connectors/Ports | Pressure module connector
RS232 serial
External power in |
| Included Accessories | Test lead set (4 leads, test clips, test probes)
NimMH battery pack
Battery pack charger
Deluxe carrying case
BPPA100 Pressure Module Adapter
Serial port cable
HART Communications cable
NIST-traceable calibration certificate, with data
Multi-lingual instruction manual on CD
Warranty registration card |
| Optional Accessories | Barcode wand |