• Male bulkhead connector
• Nominal impedance: non-constant
• Maximum operating voltage (RMS): 3500 RMS, 5000 V DC
• Insulation resistance: 10E6 MΩ
• Temperature range: -65° C to 165° C (-85° F to +329° F)

The high-voltage 5 kV SHV male bulkhead connector is used to connect external equipment.

High-voltage installation:

1. Turn off power and allow all voltage to discharge.

2. Install the Model 2290-5-SHVBH SHV male bulkhead connector (see next figures).

Materials

A. Bodies and fittings: brass, QQ-B-626, alloy 360, 1/2 hard

B. Crimp sleeves: commercial bronze, alloy 220

C. Male center contact: brass, QQ-B-626, alloy 360, 1/2 hard

D. Outer contact: beryllium copper, ASTM-B-196

E. Insulator: PTFE, ASTM D1457

F. Gaskets and seals: silicone rubber, ZZ-R-765A, class IIA, grade 50

G. Contact finish: .0001 inch minimum, hard gold plate, MIL-G-45204B