|
|
SS-7821A
|
SS-7811/7810A
|
SS-7805A
|
SS-7804A
|
SS-7802A
|
| Display |
| CRT |
6-inch rectangular, internal graticule (8 x 10 div, with scale illumination) - Japan made |
6-inch rectangular, internal graticule (8 x 10 div) |
| Accelerating voltage |
Approx. 16 kV |
2 kV |
| Vertical deflection system |
| Mode |
CH1, CH2, CH3, ADD, ALT, CHOP |
CH1, CH2, ADD, ALT, CHOP |
| Frequency bandwidth |
|
| 5 mV/div - 5 V/div |
DC - 200MHz |
DC - 100MHz |
DC - 50MHz |
DC - 40MHz |
DC - 20MHz |
| 2 mV/div |
DC - 50MHz |
DC - 50MHz |
DC - 20MHz |
DC - 20MHz |
DC - 10MHz |
| Sensitivity (CH1, CH2) |
2 mV/div - 5 V/div 11-step (1-2-5), 2 mV - 12.5 V/div(with vernier) |
| Accuracy |
?2% |
| Bandwidth limiter |
20MHz Not provided |
| Rise time (Calculated from freq. bandwidth x rise time = 0.35) |
1.75 nsec |
3.5 nsec |
7.0 nsec |
8.75 nsec |
17.5 nsec |
| Signal delay |
Available Not provided |
| Input coupling |
AC, DC, GND (The cut-off freq. Is 4Hz with AC coupl.) |
| Input RC - direct |
1 Mω ?1.5% // 20 pF ?2 pF |
1 Mω ?1.5% // 25 pF?2 pF |
| Max. input |
1 Mω input : 400 V (DC + AC peak), with 10:1 probe : 600 V (DC + AC peak) |
| Polarity switching |
Possible only for CH2 |
| Probe sensor |
1:1, 1:10, 1:100 detection possible |
| Sensitivity (CH3) |
50 mV/div, 100 mV/div, 500 mV/div, ?2% ? |
? |
| Input coupling |
AC, DC |
? |
| Triggering |
| A triggering |
|
| Source |
VERT, CH1, CH2, CH3, LINE |
VERT, CH1, CH2, EXT, LINE |
| Coupling |
AC, DC, HF-REJ, LF-REJ |
| Level |
|
| DC - 5MHz |
0.4 div |
0.4 div |
0.4 div |
0.4 div |
0.4 div |
| 5MHz - 10MHz |
0.4 div |
0.4 div |
1.0 div |
1.0 div |
1.0 div |
| 10MHz - 40MHz |
1.0 div |
1.0 div |
1.0 div |
1.0 div |
1.0 div (-20MHz) |
| 40MHz - 50MHz |
1.0 div |
1.0 div |
1.0 div |
? |
| 50MHz - 100MHz |
1.0 div |
1.0 div |
? |
| 100MHz - 200MHz |
1.5 div |
? |
? |
| B triggering |
|
Not provided |
| Source |
CH1, CH2, CH3, LINE |
? |
| Coupling |
AC, DC, HF-REJ, LF-REJ |
? |
| TV triggering |
NTSC, PAL/SECAM, HDTV |
NTSC, PAL/SECAM |
| Trigger mode |
TV-V (ODD, EVEN, BOTH) line number selectable, TV-H |
| EXT triggering input |
| Level |
| DC - 5MHz |
? |
80 mV |
80 mV |
80 mV |
| 5MHz - 20MHz |
? |
200 mV |
200 mV |
200 mV |
| 20MHz - 40MHz |
? |
? |
200 mV |
? |
| 20MHz - 50MHz |
? |
200 mV |
? |
? |
| Max. input voltage |
? |
1 Mω : 400 V (DC + AC peak) |
| X-Y |
| X-axis |
CH1 |
| Sensitivity |
Same as CH1 |
| Accuracy |
?3% |
| Bandwidth |
DC - 2MHz |
DC - 1MHz |
| Y-axis |
|
| Operating channel |
CH1, CH2, CH3, ADD CH1, CH2 |
CH1, CH2 |
| Horizontal deflection system |
| Horizontal display |
A, ALT, B, X-Y |
A, X-Y |
| Mode |
AUTO, NORM, SINGLE |
| A sweep time |
|
| Fastest range with mag. |
1 nsec/div |
2 nsec/div |
10 nsec/div |
10 nsec/div |
20 nsec/div |
| Slowest range |
500 msec/div |
| B sweep time |
- |
Not provided |
| Fastest range with mag. |
1 nsec/div |
2 nsec/div |
? |
| Slowest range |
5 msec/div |
|
| Accuracy |
A/B ?2% |
| Delay |
Triggered delay CH1, CH2, CH3
Continuous delay: RUNS AFTER |
? |
| Delay jitters |
1/20,000 |
? |
| Magnifier |
10 times |
| Hold-off time |
Variable (up to sweep length or longer) |
| Auto setup |
V/H position, V/H range,trigger |
Not provided |
| Input channel |
CH1, CH2 |
? |
| Frequency response |
50Hz - 50MHz ? |
? |
| CH2 signal output |
DC - 100MHz |
DC - 100MHz |
DC - 20MHz |
DC - 20MHz |
DC - 10MHz |
| Calibrator |
Square-wave, 1kHz?0.1%, 0.6 Vp-p?1% |
| CRT read-out |
|
| Read-out |
Attenuator range, ADD UNCAL, AC/DC/GND, vertical mode, CH2 polarity, A/B sweep range,
x10 MAG, UNCAL, horizontal display mode, hold-off
Trigger coupling, trigger source, trigger slope, TV -field, TV-line, TV-system |
| Cursor measurement |
ΔV (voltage measurement), Δt (time measurement), 1/Δt(division calculation by Δt) |
| Frequency counter |
5-digit, 0.01% |
| Frequency range |
2Hz - 200MHz, reciprocal |
2Hz - 100MHz, reciprocal |
2Hz -50MHz, reciprocal |
2Hz - 40MHz, reciprocal |
2Hz - 20MHz, reciprocal |
| Save and recall |
Up to 32-setup (only for SS-7821A/SS-7811A) |
Not provided |
| Power off set-up |
Panel setting before switch is powered off |
| Back-up |
Battery back-up (approx. 30,000 hr) |
| Power supply |
AC 90 V - 132 V/180 V - 250 V, 50Hz - 400Hz, max. 110 VA |
AC 100 V/110 V - 120 V/220 V/ |
230 V - 240 V, 50Hz - 60Hz |
| Dimensions and weight |
272W x 152H x 390L mm, approx. 7.5 kg |
272W x 152H x 390L mm, approx. 8.5 kg |
| Environment conditions |
| Operating |
0?C - +40?C, 90% RH (40?C) |
| Performance guaranteed |
+10?C - +35?C |
| Standard accessories |
Power cable (x 1), probe (x2), fuse (x2), panel cover (x1), operation manual (x 1) |
Power cable (x 1),probe (x 2), panel cover (x 1),operation manual (x 1) |