| MODEL NUMBER |
AFG-125 / AFG-125P |
AFG-225 / AFG-225P |
| OUTPUT CHANNELS |
1 |
2 |
| WAVEFORMS |
Sine, Square, Ramp, Pulse, Noise, ARB |
|
ARBITRARY
FUNCTIONS
|
Sample Rate |
120 MSa/s |
| Repetition Rate |
60MHz |
| Waveform Length |
4k points |
| Amplitude Resolution |
10 bits |
| Non-Volatile Memory |
4k points |
|
FREQUENCY
CHARACTERISTICS
|
Range |
Sine/Square |
1uHz~25MHz |
| |
Ramp |
1uHz~1MHz |
| Resolution |
1uHz |
| Accuracy |
Stability |
±20 ppm |
| Aging |
±1 ppm, per 1 year |
| Tolerance |
=1 mHz |
|
OUTPUT
CHARACTERISTICS
|
Amplitude |
Range |
GPA-501 power supply: 1mVpp to 2.5Vpp (into 50O), 2mVpp to 5Vpp (open-circuit)
USB power supply : 1mVpp to 2Vpp (into 50O), 2mVpp to 4Vpp (open-circuit)
|
| Accuracy |
±2% of setting ±1 mVpp (at 1 kHz) |
| Resolution |
1mV or 3 digits |
| Flatness |
±1% (0.1dB) =100kHz, ±3% (0.3 dB) =5MHz,±5% (0.4 dB) =12MHz, ±10%(0.9dB) =25MHz(sine wave relative to 1kHz) |
| Units |
Vpp, Vrms, dBm |
| Offset |
Range |
GPA-501 power supply: ±1.25 Vpk ac +dc (into 50O), ±2.5Vpk ac +dc (Open circuit)
USB power supply: ±1 Vpk ac +dc (into 50O),±2 Vpk ac +dc (Open circuit)
|
| Accuracy |
2% of setting + 10mV+ 0.5% of amplitude |
| WAVEFORM OUTPUT |
Impedance |
50O typical (fixed), > 10MO (output disabled) |
| Protection |
Short-circuit protected. Overload relay automatically disables main output. |
|
SINE WAVE CHARACTERISTICS
|
Harmonic Distortion
|
=-50 dBc DC ~ 1MHz, Ampl > 1Vpp
=-35 dBc 1MHz ~ 5MHz, Ampl > 1Vpp
=-30 dBc 5MHz ~ 25MHz, Ampl > 1Vpp
|
|
SQUARE WAVE CHARACTERISTICS
|
Rise/Fall Time |
=10ns at maximum output. (into 50 O load) |
| Overshoot |
<2% |
| Asymmetry |
1% of period +5 ns |
| Variable duty Cycle |
1.0% to 99.0% =100kHz
10% to 90% = 1MHz
50% = 25MHz
|
|
RAMP CHARACTERISTICS
|
Linearity |
< 0.1% of peak output |
| Variable Symmetry |
0% to 100% (0.1% Resolution) |
|
PULSE CHARACTERISTICS
|
Period |
40ns~2000s |
| Pulse Width |
20ns~1999.9s |
| Overshoot |
<2% |
| Accuracy |
0.1%+20ns |
| Jitter |
20ppm +10ns |
| AM MODULATION |
Carrier Waveforms |
Sine, Square, Ramp, Pulse, Arb |
| Modulating Waveforms |
Sine, Square, Triangle, Upramp, Dnramp |
| Modulating Frequency |
2mHz to 20kHz |
| Depth |
0% to 120.0% |
| Source |
Internal |
| FM MODULATION |
Carrier Waveforms |
Sine, Square, Ramp, |
| Modulating Waveforms |
Sine, Square, Triangle, Upramp, Dnramp |
| Modulating Frequency |
2mHz to 20kHz |
| Peak Deviation |
DC to Max Frequency |
| Source |
Internal |
| SWEEP |
Waveforms |
Sine, Square, Ramp, |
| Type |
Linear or Logarithmic |
| Start/Stop Freq |
1uHz to Max Frequency |
| Sweep Time |
1ms to 500s |
| Source |
Internal / Manual |
| FSK |
Carrier Waveforms |
Sine, Square, Ramp, Pulse |
| Modulating Waveforms |
50% duty cycle square |
| Modulation Rate |
2mHz to 100 kHz |
| Frequency Range |
1uHz to Max Frequency |
| Source |
Internal |
| PM |
Carrier Waveforms |
Sine, Square, Ramp |
| Modulating Waveforms |
Sine, Square, Triangle, Upramp, Dnramp |
| Modulation Rate |
2mHz to 20kHz |
| Phase deviation |
0° to 360° |
| Source |
Internal |
| SUM |
Carrier Waveforms |
Sine, Square, Ramp, Pulse, Noise |
| Modulating Waveforms |
Sine, Square, Triangle, Upramp, Dnramp |
| Modulation Rate |
2mHz to 20kHz |
| SUM Depth |
0% to 100.0% |
| Source |
Internal |
| SYNC OUTPUT |
Type |
Sync, Sweep Marker, Burst Marker or Arbitrary Waveform Marker |
| Level |
TTL Compatible into 50O |
| Assignment |
Channel 1 or Channel 2 |
| Polarity |
Normal or Inverted |
| Fan-out |
=4 TTL Load |
| Impedance |
50O Typical |
| DUAL CHANNEL FUNCTION |
Phase |
-180° ~180° (Square and Pulse can not be change, Phase is 0°) |
| Track |
Synchronize phase |
| Coupling |
CH2=CH1 OR CH1=CH2
Frequency(Ratio or Difference)
Amplitude & DC Offset
|
| BURST |
Waveforms |
Sine, Square, Ramp, Arb |
| Frequency |
1uHz~15 MHz(sine)
1uHz~15 MHz(Square)
1uHz~1 MHz (Ramp |
| Burst Count |
1 to 65535 cycles or Infinite |
| Start/Stop Phase |
-360 to +360 |
| Internal Period |
1ms to 500s |
| Gate Source |
External Trigger |
| Trigger Source |
Single or Internal Rate |
| TRIGGER DELAY |
N-Cycle, Infinite |
0s to 655350ns |
| SAVE/RECALL |
10 Groups of Setting Memories |
| POWER OUTPUT |
Only AFG-125P/AFG-225P |
Output Voltage : (2.5V/3.3V/5V)±5%,
Output Current : 0.6A
|
| INTERFACE |
USB (Device) |
| GENERAL SPECIFICATIONS |
| Power Source |
DC 5V |
| Power Consumption |
10 W (Max) |
| Operating Environment |
Temperature to satisfy the specification : 18 ~ 28°C , Operating temperature : 0 ~ 40°C ,Relative Humidity: < 80%, 0 ~ 40°C,Installation category: CAT II |
| Operating Altitude |
2000 Meters |
| Storage Temperature |
-10~70°C, Humidity: =70% |
| Dimensions (WxHxD) |
215(W) x 35 (H) x 107(D) mm |
| Weight |
Approx. 1kg |