| Measurement functions |
Number of channels: 2, for voltage measurement |
| Input Connectors |
Isolated BNC connector (input impedance 1 MΩ, input capacitance 40 pF)
Max. rated voltage to earth: 300 V AC, DC (with input isolated from the unit, the maximum voltage that can be applied between input channel and chassis and between input channels without damage) |
| Measurement Range |
5 mV to 20 V/division, 12 ranges, full scale: 20 divisions, AC voltage for possible measurement/display using the memory function: 280 V rms, low-pass filter: 5/50/500/5k/50k Hz |
| Anti-aliasing Filter |
Integrated filter for suppressing aliasing distortion caused by FFT processing (automatic cutoff frequency setting/OFF) |
| Measurement Resolution |
1/1600 of measurement range (using 16-bit A/D conversion; installed in 8860 series) |
| Highest Sampling Rate |
2 MS/s (simultaneous sampling in 2 channels) |
| Accuracy |
DC amplitude: ±0.2% of full scale (with filter 5 Hz)
Zero position: ±0.1% of full scale (with filter 5 Hz, after zero adjustment) |
| Frequency Characteristics |
DC to 200 kHz ±3 dB, with AC coupling: 7 Hz to 200 kHz ±3 dB |
| Max. Allowable Input |
400 V DC (the maximum voltage that can be applied across input pins without damage) |
| Dimensions and Mass |
approx. 170 (6.69in) W × 20 (0.79in) H × 148.5 (5.85in) D mm, approx. 310 g (10.9 oz) |