Function |
Description |
Vertical Deflection |
Operating Modes |
Channel 1 or 2 Only
Channels 1 and 2 (alternate or chopped)
Sum or Difference of Channel 1 and Channel 2 |
Invert |
Channel 2 |
X-Y Move |
5mV/Div - 20C/Div |
AC: 2 Hz - 40MHz
DC: 0 - 40MHz |
1mV/Div - 2mV/Div |
AC: 2Hz - 10 MHz
DC: 0 - 10 MHz |
Rise Time (Calculated) |
< 35ns (1 mV/div - 2mV/Div)
< 8.75 ns [5mV/div - 20V/Div] |
Deflection Coefficient |
1-2-5 Sequence± 5%
(1 mV/div. - 2 mV/div.)
± 3% (5 mV/div. - 20 V/div.)
Variable (uncalibrated): >2.5:1to ›50V/div. |
Input Impedance |
1MO II 15pF |
Input Coupling |
DC, AC, GND (ground) |
Max. Input Voltage |
400V (DC + peak AC) |
Triggering |
Automatic (Peak to Peak) |
5Hz…50MHz (=0.5div.)
50MHz…80MHz (=1div.) |
Normal with Level Control |
0…50MHz (=0.5div.)
50MHz…80MHz (=1div.) |
Slope |
Rising or Falling |
Coupling |
AC (5Hz…80MHz)
DC (0…80MHz)
LF (0…1.5kHz) |
Trigger Indicator |
LED |
External Trigger |
Input Impedance |
1MO II 15pF |
External
Trigger Signal |
0.3Vpp=5V
DC: (0 - 50MHz)
AC: (20Hz - 50MHz) |
Max. Input Voltage |
100 V (DC + Peak AC) |
Active TV Sync. Separator |
Field and Line, +/- |
Horizontal Deflection |
Automatic
(Peak to Peak): |
General |
0.2s/div. - 100ns/div.
(1-2-5 Sequence) |
Accuracy |
± 3% |
Variable
(uncalibrated) |
> 2.5:1 to > 1.25s/div. |
x Magnification x 10 |
Measurement
Range |
Up to 10ns/div |
Accuracy |
± 5% |
Hold-off Time |
variable to approx. 10 : 1 |
XY |
Bandwidth
X amplifier |
0 - 2.5MHz (-3dB) |
XY Phase
shift <3° |
< 120kHz |
Operation/Readout/Control |
Manual |
via Controls and Buttons |
Autoset |
automatic signal related parameter settings |
Save and Recall |
6 instrument parameter settings |
Operation/Readout/Control |
Test Voltage |
approx. 7Vrms(open circuit) |
Test Current |
max. 7mArms(short-circuit) |
Test Frequency |
approx. 50Hz |
Test Connection |
2 banana jacks 4mm Ø
One test circuit lead is grounded via protective earth (PE) |
Miscellaneous |
CRT |
D14-363GY, 8 x 10div. with internal graticule |
Acceleration Voltage |
approx. 2kV |
Trace Rotation |
adjustable on front panel |
Z-Input (Intens. modulation) |
max. + 5V (TTL), 10kHz |
Probe ADJ Output |
1kHz / 1MHz Square Wave Signal ca. 0.2Vpp
(tr <5ns) for probe adjustment |
Power Supply (Mains) |
105/253V, 50/60Hz ±10%, CAT II |
Power Consumption |
approx. 30 Watt at 230V/50Hz |
Safety Class |
Safety class I (EN61010-1) |
Max. Relative Humidity |
5%-80% (non condensing) |
Temperature |
Operating |
+5°C-+40°C |
Storage |
-20°C-+70°C |
Physical Dimensions |
Size |
11.2 x 4.9 x 14.96 inches (285 x 125 x 380 mm) |
Weight |
10.6lbs (4.8 kg) |