| Model: DP-581H Specifications |
| Model name |
DP-581H |
| Printing method |
Thermal printing system using thermal paper |
| Print resolution |
8 dots/mm in width and feed direction |
| Paper feed accuracy |
±2% ±0.5 mm |
| Print width |
210 mm |
| Recording paper roll length |
30 m |
| Print head lifetime |
Approx. 30 km (in print density 12.5 %) |
| Operation panel |
| Key |
Power, Paper feed |
| Display |
Status LED (Power, Battery, Alert)
Status is indicated by combinations of three LEDs turning on/blinking/turning off. |
| Interface |
| Type |
USB2.0 (Type-C), Wireless LAN (IEEE 802.11 b/g/n) |
| Network function |
Web server function (for printer unit condition setting), DHCP client function |
| Supported models |
GL2000, GL980, GL840, GL240
* GL2000, GL980: Connect with USB or LAN cable
* GL840: Connect with LAN cable or WLAN
* GL240: Connect with WLAN |
| Operating environment |
5 to 35 ºC, 30 to 80 %RH (No condensation) |
| Power source (*3) |
| AC Adapter |
100 to 240 V AC, 50/60 Hz |
| Battery pack |
Rechargeable lithium-ion battery (6-cell, 11.1 V, 6000 mAh, 66.6 Wh) |
| Battery (*3) |
| Charging |
Charge using the main printer unit |
| Battery level |
Indicates low power warning with LED |
| Driving time (typical) |
Approx 150 meters at full charge in continuous printing at 5 mm/s with a low printing rate |
| External dimensions |
Approx. 312 [W] x 109 [D] x 66 [H] mm (excluding protrusions) |
| Weight |
Approx. 2.0 kg (including battery pack and excluding AC adapter) |
| Corresponding standards |
CE mark, RoHS |
| Printer function |
| Print mode |
| Y-T format in real time |
Prints data in waveform in real time while GL unit is recording in Y-T display mode
• Synchronous or asynchronous with the trigger |
| Y-T format in replay |
Prints data in waveform while data is being replayed on the GL unit in Y-T display mode
• All data or data in the area specified by cursors
* Not supported during 2 screen replay |
| Logging data in real time |
Prints data in digital value in real time while GL unit is recording in digital display
• Synchronous or asynchronous with the trigger |
| Digital data in replay |
Prints data in digital data while data is being replayed on the GL unit in Y-T display mode
• Option to print data in the area specified by cursors (Up to 1000 data points) |
| X-Y format printing |
Prints the XY graph when displaying data in X-Y format on the GL unit. (For GL980 and GL2000 only) |
| Bar graph printing |
Prints accumulated data graph displayed on the stacked bar graph on the GL unit |
| Y-T format |
| Feed speed |
1, 2, 5, 10, 20, 25 mm/s, 1, 2, 5, 10, 20, 25, 30, 50, 100 mm/min, 1, 2, 5, 10, 20, 25, 30, 50, 100 mm/h, 10, 20 mm/day and external signal synchronization
• Function to set feed speed close to the screen TIME/DIV setting of GL unit.
* Does not automatically sync with TIME/DIV setting on the GL unit. Effective feed speed range depends on the sampling setting of the GL unit. |
| Print format |
200 mm x 1 (* Multi-zone printing is not available.) |
| Zone function |
Trace position on printing is the same as the setting of the GL unit.
* One DIV grid on the GL unit corresponds to two DIV grids on printed paper. |
| Grid printing |
Off, 5 mm, 10mm Fine/Coarse |
| Span/Position |
Size and position of trace on printing are dependent on the setting of the GL unit |
| Annotation |
Prints the information set on the GL unit
Title field: Date, time, feed speed, system annotations
Channel field: Ch Annotation, AMP setting, data value
* Other texts can be added using flying annotation. |
| Channel mark |
Prints channel number |
| Distance mark |
Prints the accumulated value from the start point every 50 mm |
| Timing marker |
Off, 1, 10 sec, 1, 10 min, 1, 10 hrs |
| Alarm printing |
Prints the mark at point where the alarm occurred
* Prints perpendicular to feed direction. |
| Envelope mode |
Prints only an envelope of waveform |
| Trigger mark |
Prints the mark at point where the trigger occurred |
| Scale printing |
Prints scale value of channel |
| Logging printing |
Prints data with digital format
* Sampling is limited to 1 second or slower. |
| XY printing |
Prints waveform by copying the screen of the GL unit |
| Screen copy |
| Function |
Prints image of screen displayed on the GL unit |
| Tone |
Color lines on screen of the GL unit are converted to grayscale by dither system |
| Waveform area |
Background color is the same as screen setting of the GL unit |
| List printout |
Prints condition settings of the GL unit |
| External signal synchronous feed function |
Synchronizes paper feed speed with an external signal inputting to the GL unit
* The external signal input to GL is adapted to one of external sampling, external trigger, synchronous paper feed. |