Hipot Tester, 0-5000Vac @ 200mA, 0-7000Vdc @ 200mA
A 5000V AC/ 6000VDC hipot tester that's easy to use and priced right. Select AC or DC output via front panel button. Simple for production line personnel, easy to set up. Designed so that operator can defeat the leakage current limit and dielectric breakdown shutoffs to allow troubleshooting and analysis of problems with the DUT. Includes precision leakage current and test time setup and viewing from the LED meter. Adjustment is made with no HV output. Made in the USA. Ships with Calibration Certificate to MIL-STD 45662-A, manual and return lead.
| SAFETY |
| Visual Indicator of Voltage Output | Provided by front panel meter, directly connected to high voltage output. |
| Failure Indicator | Audible, provided by buzzer.
Visual, Provided by red LED's.
Test automatically terminated on failure. |
| Leakage Test | Provided, 5 mA factory set pass/fail point, user adjustable. |
| OPTIONS |
| (XI) Safety Interlock | Two position terminal blocks on rear panel must be shorted for high voltage operation. |
| (VF) Voltage on Failure | If failure as Excess Leakage or Hipot Fail happens, it will terminate the test and the front voltage display will hold the last voltage reading. |
| (AR) Auto Reset on Pass | Resets the units after a few seconds only on passing test conditions. |
| (ZOS) Zero Voltage Start | Voltage adjusts knob must be to minimum position to allow start the test cycle. |
(RI) Relay Isolated Remote Interface | It allows the interface with a PLC or other machine using relay closures. This option allows isolation between the PLC and the Hipot tester. |