My Account

Log in to Your Account

Not a member yet? It's FREE!

Join

Why Join? Gain access to exclusive pricing, rewards and more!

Member Pricing & Rewards active

(877) 571-7901

Sales@TEquipment.NET

()

Shop By Category
Top Categories
Clamp Meters
Datacom and Networking Products
Dataloggers Data Acquisition
Signal Generators / Counters
Ground Testers
HVAC Equipment and Instruments
Life Sciences Equipment
Megohmmeter / Insulation Resistance Testers
Microscopes
Multimeters
Oscilloscopes
Power Measurement
Power Supplies
Process / Calibration
RF, Microwave, EMI
Safety Testing / Surge Testing
Soldering Equipment
Thermal Imagers
Shop All Categories
Empower your diagnostics with this compact, shock-resistant three-phase analyzer that boasts 2GB memory, capturing trends, transients, and Inrush currents effortlessly for precise power quality insights.SHOP NOW

The SDS1000X HD series, based on 2 GSa/s, 12-bit Analog-Digital Converters, utilizes Siglent’s SPO technology with a maximum waveform capture rate of up to 120,000 wfm/s.SHOP NOW

Everything at a glance, in your hand. Fast measurement and easy operation via large graphic display and your smartphone – yet extremely compact and rugged.SHOP NOW
Brands
- Rigol
- Megger
- Hioki
- Hakko
- Extech
- Instek
- Weller
- AEMC Instruments
- Bacharach
- Dranetz
- Emerson
- Greenlee
- JBC
- Vitrek
- View All Brands
Promotions
Clearance

Member Price INACTIVE
Create a FREE Account to Unlock Your Savings
Member Price ACTIVE

Compliance 380R Defibrillation Surge P Resistor Network for Defib Surge P 380

Name: Compliance 380R Defibrillation Surge P Resistor Network for Defib Surge P 380
Brand: Compliance West
SKU: Compliance380R
Availability: InStock

0 reviews | Catalog: 380R | Model: Compliance West 380R

Compare

Defib Surge P Resistor Network

Defib Surge P Resistor Network
Up to 380V test voltage.
Microcontroller technologies, front panel voltage meter indicates test peak open circuit voltage and polarity.
Output voltage and polarity are controlled manually from the front panel.
Ergonomically designed for safety, speed and efficiency.
Cables, manual and calibration certificate included.
External interlock disables HV output and defeats test when circuit is open.
Optional USB Testminder, computer control.
Optional Resistor network of Fig. 110.
One year calibration cycle.
One year warranty.

View Product Details

In Stock:

View Payment Options

Call Us

Request Quote

Recommended for you

Description

MegaPulse Surge Tester

Optional USB Testminder, computer control

Micro-controller technologies, front panel voltage meter indicates test peak open circuit voltage and polarity.

Built to the requirements of IEC 1180-1, Voltage Testers

Generates the waveforms described in EN60335, Paragraph 14 for testing electrical separation.

Compliance 380R Defibrillation Surge P Resistor Network for Defib Surge P 380

A Compliance West surge Tester. That means it outputs a guaranteed waveform but won't bank. The tester outputs the waveform it is supposed to, time after time.

Built in the USA. Email and phone support free for life. Reasonable repair and calibration charges. Timely and helpful customer service always.

The Defib Surge P 380 outputs the pulse shown in and a Tw50 of 3 - 5.5ms when discharged protection, Fig. 110’s R7 and R1 are supplied internally. In accordance Megapulse Defib Surge P 380 can recharge and trigger the next pulse within 20 seconds.

Controls, Indicators, Connectors – MegaP ulse Defib Surge P 380 Front Panel

ITEM	NAME	FUNCTION
1	VOLTAGE Adjust Knob	Adjust the voltage set point in the tester. Turn Clockwise to increase the output voltage after the CHARGE button has been pressed. Turn the knob fully counterclockwise (lowest voltage setting) before the start of each test, and afterthe end of each test.
2	POLARITY switch	Toggles the output pulse polarity from Normal to Reverse, Normal for positive and Reverse for Negative, The pulse will appear on the Output jack relative to the return jack The polarity switch only operates when the CHARGE indicator is lit and the voltage on the display meter is less than 180V. The polarity is Normal when the NOR indicator is lit and, Reverse when the REV indicator is lid.
3	NOR REV indicator	Indicates the state of the Output Polarity switch. NOR indicates Normal (Positive) position. REV indicates Reverse (Negative) position.
4	CHARGE switch	Starts the charge process of the tester capacitor. The CHARGE indicator will turn off after the CHARGE switch is pressed, and the TRIGGER indicator will turn on. The charge process will stop after 2 minutes if the TRIGGER button is not pressed.
5	CHARGE indicator	This Yellow indicator is lit to show that pressing the CHARGE switch is the next logical step in a test sequence. CHARGE indicator is lit when the tester is turn ON an after pressing TRIGGER button. CHARGE indicator will go out after pressing CHARGE button. CHARGE and TRIGGER Indicators will be blinking if the Interlock Switch is open. (Only testers with Interlock SwitchOption)
6	TRIGGER switch	Triggers the output impulse waveform. The impulse waveform will appear across the output leads.
7	TRIGGER indicator	This Red indicator is lit to show that the tester can be trigger. TRIGGER indicator is lit for 2 minutes after the CHARGE button is pressed. TRIGGER indicator will go out after pressing TRIGGER button. TRIGGER and CHARGE Indicators will be blinking if the Interlock Switch is open (Only testers with Interlock Switch Option) TRIGGER indicator will blink at when the Voltage. This effect will remain on until the TRIGGER switch is pressed. (Only testers with PC Interface option)
8	VOLTAGE meter	Displays the output voltage set point. The voltage reading will increase from zero to the voltage set point when the CHARGE button is pressed. Note that the Voltage meter may indicate that some residual voltage is present on the main storage capacitor, even when the tester is first turned ON. This is due to inherent charging of the internal capacitors. Pressing the TRIGGER switch will discharge the capacitors. Note that the peak amplitude of the measured output waveform is proportional to the voltage that is read of the front panel of the MegaPulse, but it will always be somewhat lower. This is because the meter on the MegaPulse is measuring the voltage on the main impulse storage capacitor. This voltage will intentionally dissipate to some extent before reaching the output leads. The meter will start to flash at 12210V to indicate that voltage is in the maximum limits. If unit includes PC Interface and the Keyboard is locked, the display will show OFF when a button is pressed.
9	OUTPUT jack	The impulse waveform appears on the OUTPUT jack, referenced to the RETURN jack. When the POLARITY switch is in the Normal position (NOR indicator is lit) the output will be a positive pulse. When the POLARITY switch is in the Reverse position (REV indicator is lit) the output will be a negative pulse.
10	RETURN jack	This is the return for the impulse waveform. This jack is referenced to the chassis of the MegaPulse, and is referenced to earth ground as long as the MegaPulse is properly grounded. Even though this jack is referenced to ground, it should be treated as hazardous whenever the MegaPulse is turned ON.

Controls, Indicators, Connectors – MegaPulse Defib Surge P 380 Rear Panel

ITEM	NAME	FUNCTION
1	Appliance Inlet /Fuseholder / Power Switch	Use supplied cordset to connect the MegaPulse 1.2x50-12P tester to an appropriate source of supply. Fuse holder provides access for Fuse replacement, and the Power Switch is used to turn the tester ON and OFF.
2	RS-232 Interface (Optional)	Apply a 5V (25mA) voltage signal for 500mS +/-200ms to start the Trigger process.
3	Interlock Switch (Optional)	Emergency Stop Close: Enables the tester buttons for operation. Open: Stops any process in the tester and disables the buttons. The TRIGGER and CHARGE Indicators will be blinking
4	Fuse replacement warning / Rating of power supply	Specifies replacement fuse and required supply voltage.

Waveform Measurement Setup

Testing

This section describes how the MegaPulse Defib Surge P 380 tester is used to conduct a test. The test can be stopped immediately at any time by turning OFF the rear-panel power switch.

Connect the tester to a proper source of supply using the included 18 AWG power supply cord.Make sure that the front panel VOLTAGE adjust knob is turned fully counterclockwise.
Plug the Output and Return test leads into the jacks on the front panel.
Connect the ends of the test leads to the equipment under test.
Turn the Tester on. Toggle the POLARITY switch as needed so that the NOR or REV indicator is lit.
Note that the Voltage meter may indicate that some residual voltage is present on the main storage capacitor, even when the tester is first turned ON. This is due to inherent charging of the internal capacitors. Pressing the TRIGGER switch will discharge the capacitors (be sure not to touch the output and return leads when pressing the trigger switch).
Push the yellow CHARGE button. Verify the red TRIGGER indicator is now lit.
Adjust the VOLTAGE knob so that the front panel LED display is reading a voltage that is suitable for the measuring instrument that is being used. Push the red TRIGGER button, when the desired voltage is displayed on the front panel meter.
Note that the peak amplitude of the measured output waveform is proportional to the voltage that is read of the front panel of the MegaPulse, but it will always be somewhat lower. This is because the meter on the MegaPulse is measuring the voltage on the main impulse storage capacitor. This voltage will intentionally dissipate to some extent before reaching the output leads.

Manuals/Guides

Manufacturer Specs

Specifications
Output Voltage (Vtest)	0 – 380 V +5%, -0%
Rise Time (Tp)	1.5mS ≤ Tp ≤ 2.5mS
Duration (Tw50)	3mS ≤ Tw50 ≤ 5.5mS
Source Impedance	10 Ω
Rout	R1 50 Ω ±5%, R7 5 Ω ±5%
Voltage Control	Manually, by turning a knob in front panel
Polarity Control	Positive and negative. Alternating control available optional computer control
Voltage Display	4 digit LED display
Voltage Meter Accuracy	±4V
Duty Cycle	1 pulse every 20 seconds
Line Voltage	120V AC, 50/60Hz *optional different line voltage
Environmental
Operating Temperature	15-40 ºC
Relative Humidity Range	0-90% non-condensing
General
Dimensions	17” wide x 3U high x 17” in deep
Weight	30 lbs approx.
Product Package	Megapulse Defib Surge P 380 tester Megapulse Defib Surge P 380 product manual High Voltage Test Lead (Black), 4 feet Two High Voltage Test Leads (Red), 4 feet NIST traceable calibration certificate to ANSI Z540 Calibration waveforms
Options
XI	External interlock; two position terminal block on the rear panel must be shorted for voltage operation.
TMM	Testminder USB computer interface software. The tester can be controlled with a computer. It can also be set to automatically follow test sequences and keep a record with test information. Compatible with Windows 32bit platform.
220, 230 or 240	If a different line voltage is desired, with this option we install a step down transformer to be compatible with your line voltage. 220 is for 220V, 230 for 230V and 240 for 240V.
Resistor Network	Built in resistor network of Figure 110. Without the resistor network option the user must attach the remaining resistors outside the tester.

Compliance West 380R Product Reviews

0

Out of 5

Average Customer Review

Share your thoughts with other customers

Write a Review

Call Us

Compare

Real people, here to help you.

Get Connected

Join the community and find out what we're up to, experience live product releases, webinars and more!

How Can We Help You?

Questions?

Log in to Your Account

Not a member yet? It's FREE!

Top Categories

Compliance 380R Defibrillation Surge P Resistor Network for Defib Surge P 380

Recommended for you

Description

MegaPulse Surge Tester

Defibrillation Surge P Resistor Network for Defib Surge P 380

Optional USB Testminder, computer control

Built to the requirements of IEC 1180-1, Voltage Testers

Compliance 380R Defibrillation Surge P Resistor Network for Defib Surge P 380

MegaPulse Defib Surge P 380 Front Panel

MegaPulse Defib Surge P 380 Rear Panel

Waveform Measurement Setup

Manuals/Guides

Manufacturer Specs

Compliance West 380R Product Reviews

0

Featured Review

We'd love to hear from you

Real people, here to help you.

Get Connected

My Account

Promotions & Offers

Resources

Company