Recommend to a Friend

Great Performance and Price

5.0

I have been using the Rigol DP832 and DP832a supplies in my university lab for over a year without any issues. They are the first option when looking to purchase new supplies for more lab setups. They perform well for providing supply voltages to electronic circuits and are very cost effective.

Stephen on Jan 19, 2024 I found this helpful (0)

Recommend to a Friend

worth every penny

5.0

I struggled with solder wick on certain repairs. So I got some no-name desolder iron from that site named after a river. That one made bad smells when plugged in and did not do a clean job. So I bit the bullet and got the FR301. Wish I bought it years ago. This makes desoldering a fun activity. Not an emotional rollercoaster as with prior methods. It makes repairs mcu faster since I don't spend 15 minutes swearing at my tools and myself afterwards. Only downside is that there is not a light visible from the back end to let you know the status of the device. There is an LED but its on the front bottom, pointing away from you. Also the little metal thing to rest the iron on is a joke.

Calaverasgrande on Jan 04, 2024 I found this helpful (0)

Recommend to a Friend

Hakko FX888D-23BY Soldering Iron/Station/Tips

5.0

For years I have owned and used competing brands of soldering irons. Frustrations with them include obtaining correct replacement parts and having a wide range of tips to accommodate special tasks. I decided to throw the towel in and purchase this particular Hakko bundled FX888D from TEquipment because they offered this industry standard soldering station with a batch of additional tips, it is accepted worldwide as the most popular iron, and spare parts and tips are readily available. I purchased the base with the standard FX-8801 handpiece which accepts the Hakko T18 style tips that are hollow on the back end. This base assembly also accepts the Hakko FX-8802 handpiece which has N2 capability in case I ever need that, and also accepts the FX-8805 large handpiece which is great for high heat requirements and accepts both T18 and T19 style tips (I bought this as well). With this combination, I now have soldering equipment and many tips with which I can perform any soldering job from very fine SMD components to direct chassis soldering that requires massive heat. The FX-8801 handpiece heats up much faster than competing irons. Tips are easily replaced. The base unit is programmable for specific temperature settings if desired, and also allows password control of iron settings when the unit is used at a station where multiple people use it or in multiple day shifts. I am extremely satisfied with this Hakko combination. TEquipment is also a very great distributor to work with.

on Dec 20, 2023 I found this helpful (0)

Recommend to a Friend

Comparison to the original analog version FX888 !

4.0

I own the FX888 analog design that preceded this digital design and it's pretty much exactly the same, except with the advantage of a nice large analog turn knob dial to set the temperature. You don't need a display since the dial has number markings. A red below the dial turns off when the iron is at temperature. I much prefer this as i can change temperature in 1 sec instead of having to fidget with a pressure button that's vertical on the face of the unit which is obviously not ergonomic. Often times in many tools going digital is not an upgrade, analog is better. Analog dials are always superior to beeping press buttons with delay and timers.

Eric on Oct 22, 2023 I found this helpful (0)

Recommend to a Friend

Comparison to the original analog version FX888 !

4.0

I own the FX888 analog design that preceded this digital design and it's pretty much exactly the same, except with the advantage of a nice large analog turn knob dial to set the temperature. You don't need a display since the dial has number markings. A red below the dial turns off when the iron is at temperature. I much prefer this as i can change temperature in 1 sec instead of having to fidget with a pressure button that's vertical on the face of the unit which is obviously not ergonomic. Often times in many tools going digital is not an upgrade, analog is better. Analog dials are always superior to beeping press buttons with delay and timers.

James Erlenmeyer on Oct 22, 2023 I found this helpful (0)

Recommend to a Friend

Two thumbs up

5.0

Heats fast, comfortable to hold, flexible cord-- all in all, a very nice, well thought-out design.

on May 17, 2023 I found this helpful (1)

Recommend to a Friend

Hakko Fr-301

5.0

I trust Hakko after the 20 years of service from my Hakko 808. The FR-301 works even better. Looking forward to the next 20 with this one.

Jim Francis on Apr 10, 2023 I found this helpful (1)

Recommend to a Friend

Great scope at a great price!

5.0

I recently purchased the Rigol DS1054Z 4-channel oscilloscope and I have to say, it has been a game-changer for my electronic projects. As someone who is passionate about electronics, I was looking for a scope that would offer me the performance I need at an affordable price, and the DS1054Z has exceeded my expectations. First off, the setup was incredibly easy, and the user interface is intuitive and easy to navigate. The scope has a large, clear screen that displays waveforms beautifully and with great detail. The four channels provide plenty of flexibility to view multiple signals simultaneously, and the sampling rate is high enough to capture even the fastest signals. I also love the fact that this scope has built-in waveform measurements and math functions, which saves me time and helps me make more accurate measurements. Additionally, the advanced trigger modes are incredibly useful, allowing me to capture and analyze signals that other scopes might miss. Overall, I am extremely satisfied with my purchase of the Rigol DS1054Z. It has all the features I need to tackle even the most challenging electronic projects, and at a price point that makes it accessible to hobbyists and professionals alike. I highly recommend this scope to anyone who is serious about electronics and looking for a reliable and high-performing oscilloscope.

Verified Purchase Darryl Davis on Apr 04, 2023 I found this helpful (0)

Recommend to a Friend

Great scope at a great price!

5.0

I recently purchased the Rigol DS1054Z 4-channel oscilloscope and I have to say, it has been a game-changer for my electronic projects. As someone who is passionate about electronics, I was looking for a scope that would offer me the performance I need at an affordable price, and the DS1054Z has exceeded my expectations. First off, the setup was incredibly easy, and the user interface is intuitive and easy to navigate. The scope has a large, clear screen that displays waveforms beautifully and with great detail. The four channels provide plenty of flexibility to view multiple signals simultaneously, and the sampling rate is high enough to capture even the fastest signals. I also love the fact that this scope has built-in waveform measurements and math functions, which saves me time and helps me make more accurate measurements. Additionally, the advanced trigger modes are incredibly useful, allowing me to capture and analyze signals that other scopes might miss. Overall, I am extremely satisfied with my purchase of the Rigol DS1054Z. It has all the features I need to tackle even the most challenging electronic projects, and at a price point that makes it accessible to hobbyists and professionals alike. I highly recommend this scope to anyone who is serious about electronics and looking for a reliable and high-performing oscilloscope.

DJ on Apr 04, 2023 I found this helpful (0)

Recommend to a Friend

The Right Choice

5.0

The Hakko FX888D was just what I was looking for when getting back into model rocketry. The last soldering I did was 40 some years ago in the Navy. The Hakko soldering station has name recognition with a price point that exceeds other brands for value. You can not go wrong investing in a Hakko. James

on Mar 27, 2023 I found this helpful (0)

Recommend to a Friend

Hakko FR-301 Desoldering Tool

5.0

Excellent performance and ease of use, from this high quality, well made Hakko product.

Verified Purchase Cliff on Jan 12, 2023 I found this helpful (0)

Recommend to a Friend

Hakko FR-301

5.0

I was skeptical at first over the cost - but after receiving the unit and putting it to work it is worth every cent. The unit is very well constructed and performs exactly as expected. I am re-wiring 100 stop action magnets for a pipe organ and this tool cut my time approximately in half. I'm very pleased.

David Pratt on Nov 25, 2022 I found this helpful (1)

Recommend to a Friend

HAKKO FX888D

5.0

The form factor is proper for a crowded workbench. I have not tried the iron yet but I believe that it will live up to its reputation

Verified Purchase Bruce Zibung on Oct 27, 2022 I found this helpful (1)

Recommend to a Friend

The Bomb

5.0

This desoldering tool works perfect. I desoldered a 28pin chip and it fell out of the board.

Richard Fort on Oct 18, 2022 I found this helpful (1)

Recommend to a Friend

It is a good investment

5.0

I have only had the Hakko FX-888D soldering station for a few weeks but I concur with the other reviews: the unit heats up very quickly, the temperature recovery time is short, it appears to be well built, the iron is nice and light and comfortable and is easy to maneuver, and my soldering experience has been great so far. I definitely should have purchased this soldering station a lot sooner. One thing about the preset temperatures, before you can access them you need to change the temperature setting mode selection to preset mode (1) and verify that the number of presets is set to 5P in the parameter settings (see the Setting mode selection section of the manual).

Anonymous on Jul 19, 2022 I found this helpful (0)

Recommend to a Friend

Top (Desoldering) Gun

5.0

Fast heating. Excellent portability. A breeze to clean. I like not having to be tethered to a separate unit. The quick change shaft is a bonus. I will buy one for my home shop.

Anonymous on Jun 28, 2022 I found this helpful (1)

Recommend to a Friend

Great hobbyist scope for the money

4.0

The Rigol DS1054Z is simply an excellent scope for the hobbyist on a hobbyist budget. I've put this scope to good use so far, analyzing I2C, SPI, and a switch bounce issue on an old tube guitar amp. Yes, this scope is a bit older now and there are a couple of hot competitors out there (GW Instek GDS1054B and Siglent SDS1104X-U). To compete with these, the Rigol now comes with the higher end features, like 100MHz bandwidth, enabled, so it still holds its own and I am very happy with my purchase. I've read some complaints about the relay clicking noise and fan noise. All of these scopes have fan noise. You're going to hear it, but if you're used to working in an electrical lab environment, it's nothing out of the ordinary. If you're sitting at home in a quiet room with nothing else going on then, yes, it's the loudest thing in the room. My own particular gripes about the unit are (1) there's no real web interface to speak of, and the remote operation software is not user friendly and slow, and (2) the response to the controls is just a bit laggy but not terribly so. Given the age of this design compared to the newer competitors I'm not surprised. But due to these, I give it a 4 rather than 5 rating. I'm secretly hoping they'll improve the remote access with a software update, but not holding my breath, and it isn't a key feature for me. Still... great quality scope!

Mark Bratcher on Jun 08, 2022 I found this helpful (2)

Recommend to a Friend

Awesome

5.0

Been using and reccommending Hakko soldering stations for years. The FX888D is compact, rugged, reliable and works great.

Paul T. on May 30, 2022 I found this helpful (1)

Recommend to a Friend

Great tool

5.0

Easy to use, has everything you need except solder. Tips are great too. Small footprint on work bench, stable, does everything you need it to. With my arrangement, the wires are not in the way and it has made my workflow a lot easier.

on May 03, 2022 I found this helpful (0)

Recommend to a Friend

It's a must have if you work on electronics!

5.0

Very impressed, The screen size works fine for my needs, and learning the menus has been easy.

Verified Purchase James Cameron on Mar 17, 2022 I found this helpful (0)

Recommend to a Friend

Awesome

5.0

If you have read any good reviews on this gem......believe them. This is one product that exceeds expectations. I was amazed how well this thing removed everything I tried it on. If you are in the market for a desoldering tool this thing is truly a gem!!

David Kelly on Mar 15, 2022 I found this helpful (3)

Recommend to a Friend

Great Tool

5.0

This tool provides an excellent bundle of equipment for the price. It is a great basic oscilloscope form hobbiest use.

Verified Purchase Anonymous on Nov 25, 2021 I found this helpful (0)

Recommend to a Friend

Great purchase

5.0

It is so much fun to have a professional soldering iron system. VERY highly recommended. Just dial in the temperature, use the convenient holder with cleaning add ons, use whatever tips you want--and you are good to go.

Anonymous on Nov 20, 2021 I found this helpful (0)

Recommend to a Friend

Another great Hakko product

5.0

I bought this to give my old Hakko 936 a break, I have used it hard for quite a while and decided it was time to go with the smaller , digital version and this didnt let me down. Got a great price and free shipping could not be happier with my purchase.

Verified Purchase Tim on Nov 06, 2021 I found this helpful (0)

I got a lemon

1.0

Unit died 3 months later, after extremely light use and proper maintenance. I would have to send it from CR to US for fixing. No further help provided Had to replace the main PCB not available in HakkoUSA and just to be sure a new heating element from a 3rd party. The good thing is you can find parts, (hakko USA item is backordered.) The bad thing is that I got a lemon and that I had to pay for it… I will stay away from hakko products for sure from now on. is backordered.) The bad thing is that I got a lemon and that I had to pay for it… I will stay away from hakko products for sure

Verified Purchase Anonymous on Oct 19, 2021 I found this helpful (6)

Recommend to a Friend

hakko fx 888d-23y

5.0

purchased iron and 4 extra tips. am loving it. better than the other 2 i have. ty

Anonymous on Oct 19, 2021 I found this helpful (1)

Recommend to a Friend

awesome unit

5.0

this unit works great, does the Job !!

Verified Purchase Kevin Habhegger on Sep 28, 2021 I found this helpful (1)

Recommend to a Friend

Can’t go wrong with this choice

5.0

I debated extensively between this Rigol DP832 and the Siglent SPD3303X. Both are excellent values for hobbyists. Ultimately, I chose to buy the DP832 because the quality is a touch above the Siglent snd because I’ve been extremely impressed with other Rigol items I’ve purchased in the past. This power supply is extremely well built, easy to use and exactly what my workbench has been missing.

Verified Purchase Pat on Sep 23, 2021 I found this helpful (1)

Recommend to a Friend

No more solder wicks... A must have desoldering tool

5.0

A great tool for the serious electronics service technician. It saves lots of time by making a fast and clean desoldering of through-hole components off of PC boards.

Anonymous on Sep 21, 2021 I found this helpful (0)

Recommend to a Friend

Everything I expected +

5.0

This scope lives up to all the glowing reviews. It is definitely a good value. I’ve used analog oscilloscopes for decades but this is my first DSO. The user manual could use some work but the YouTube videos fill in most of the gaps.

Verified Purchase Gene on Sep 09, 2021 I found this helpful (0)

Recommend to a Friend

Excelent tool.

5.0

I work on vintage audio gear, this remove solder quickly, with out damaging pads. I love it

Verified Purchase Anonymous on Aug 02, 2021 I found this helpful (0)

Recommend to a Friend

Believe the hype!

5.0

This gun is outstanding! Follow the instructions on usage and it works lie a charm. Huge time saver. Thanks TEquipment for having it at a great price!

Verified Purchase John W Sweeney on Jul 25, 2021 I found this helpful (0)

Recommend to a Friend

RIgol rig

5.0

This rig is one of the best for the cost.

Verified Purchase Wade W Schulz on Jun 28, 2021 I found this helpful (0)

Recommend to a Friend

Outstanding product

5.0

The FR-301 is the best desoldering gun in this class. The suction pressure could not be compares with those clone products, strong pressure almost could not miss every shot. Even the gun kit and tips' prices more expensive but the outcome could not be compare or PCB damaged.

Eric Wong on Jun 27, 2021 I found this helpful (0)

Recommend to a Friend

A Great Soldering Iron

5.0

I replaced a Weller WTCPS with the Hakko FX888D after using the Hakko at the WMU plasma lab to do some repairs on equipment. It is better at maintaining tip temperature than the Weller, which makes it easier to get work done properly.

Verified Purchase Jim Cotton on Jun 08, 2021 I found this helpful (0)

Recommend to a Friend

Outstanding!

5.0

Awesome tool, works beyond expectations.
Quick, good vacuum, and easy to clean.
TEquipment is my first choice for all equipment needs.

Verified Purchase Douglas Sherwood on May 24, 2021 I found this helpful (2)

Recommend to a Friend

Good

4.0

The build quality seems to be good. The user interface is also good. I really don’t know what I’m doing with this thing. But this scope does help you learn. I could learn even faster if I had a fancy white board.

Verified Purchase david washburn on May 18, 2021 I found this helpful (1)

Recommend to a Friend

Well balanced

5.0

It has been said multiple times and I reinforce so, this scope is great for its price.

Anonymous on May 13, 2021 I found this helpful (0)

Recommend to a Friend

Hakko FX888D

5.0

Great product...Hakko is #1 best soldering iron. I have purchased many Hakko products from you and have been happy with product and delivery times!

Verified Purchase Valerie Fish on Apr 28, 2021 I found this helpful (1)

Recommend to a Friend

Great Linear Supply!

5.0

This is an outstanding piece of hardware as it is. I recommend spending a bit of time on the blogs to truly appreciate the feature set. I recommend tying the 0VDC commons together on output 2 & 3 as the isolation isn't ideal without it. I would buy this one again in a second. Intuitive and very robust.

Verified Purchase Elliot from Colorado on Apr 22, 2021 I found this helpful (1)

Recommend to a Friend

Great product

5.0

Great product, great store and sellers perfect combination. Thanks TEquipment!!

Aaron Cantu on Apr 22, 2021 I found this helpful (0)

Recommend to a Friend

Finally got my own!

5.0

I have used this station for many years at my workplace and now I finally got my own. It's simple and quick to use once you get the hang of it, works well for all kinds of jobs - tiny 0201 SMD to big power electronics parts! Also, I was happy to know that it now comes included with a chisel tip by default!

Verified Purchase Sri on Apr 05, 2021 I found this helpful (0)

Recommend to a Friend

Works excellent

5.0

trying to desolder mechanical keyboard switches without one is so time consuming and dangerous if you are not skilled. This tool pays for itself after a few uses

Only way to fly on Apr 01, 2021 I found this helpful (0)

Recommend to a Friend

Works Great

5.0

Very Nice

on Mar 31, 2021 I found this helpful (0)

Recommend to a Friend

Great little station

5.0

I love these cheap stations. We have expensive soldering equipment but we seem to grab for these more often then we'd like to admit. Just works the way a station should.

Verified Purchase Robert Dee on Mar 20, 2021 I found this helpful (0)

Recommend to a Friend

Way way better than alternatives

5.0

Having used the copper desolder approach and suction approach, this thing is so so much faster, easier and better to use. I do say get a few different sized tips to cover your bases on what you would desolder.. but it really works well. Most of the time.. one suck per solder joint, and the component comes off.

Anonymous on Mar 18, 2021 I found this helpful (0)

Recommend to a Friend

Best Thing Since Shirt Pockets

5.0

I use this on old point to point radios so it does need cleaning more frequently than SMT components but that's ok. It works and works well. I missed this thing all my life and didn't know it. I love it.

Anonymous on Mar 12, 2021 I found this helpful (0)

Recommend to a Friend

Hakko soldering station

4.0

Works as advertised. Plenty of accurately controlled heat when needed and the presets and programming are very convenient --BUT-- for some unknown reason, the user guide distributed in the US does not fully explain how to set up and program the unit. You must go to the web site and download the other user guide. Also a bit disappointed that the tip did not last as long as I would have expected.

Anonymous on Feb 27, 2021 I found this helpful (3)

Recommend to a Friend

even a beginner can do well with this

5.0

as long as they understand the theory behind soldering. High heat and stronger power supply make good soldering much easier and faster.

Verified Purchase Anonymous on Feb 23, 2021 I found this helpful (1)

Recommend to a Friend

Great First Oscope

5.0

Plenty of extra channels to use if you blow one up. Lots of documentation, good price

Verified Purchase Ryan Clark on Feb 21, 2021 I found this helpful (1)

Recommend to a Friend

Amazing Starter Station

5.0

Great solder station for the price. Easy to use and program. Other tips are easy to find. Make sure you are using good solder.

Verified Purchase Ryan Clark on Feb 21, 2021 I found this helpful (1)

Recommend to a Friend

Excellent product and service

5.0

Top notch customer service. You actually get to talk to a real person here in the states who actually sounds like they like their job and cares about keeping you as a customer. Due to me being a new customer, I had some questions and they were very helpful!! Fast shipping and product was packaged well. The iron is fantastic. I have been using an old weller for years and procrastinating upgrading. But holding components in place with my third hand waiting for the iron to warm up finally got old and I ordered this one. For the life of me, I can't figure out why I didn't get this earlier!! Trust me, get this iron, you will not regret it! Heats within 20 or 30 seconds to 650 f. Stand is stable, iron chord is just right length, tip stay hot on demand. Will be ordering future needs through Test Equipment!!

Verified Purchase Dave F on Feb 17, 2021 I found this helpful (0)

Recommend to a Friend

Hakko FR-301 Desoldering Tool

5.0

It is possible to remove solder with a manual de-soldering pump and solder wick, but there is nothing like the speed and ease of the Hakko FR-301 Desoldering Tool. The only downside is the cost. After looking at some cheaper knock-offs of the Hakko product, I decided the money was well-spent on the Hakko. Once you use this tool, you'll never go back to a manual pump.

on Feb 15, 2021 I found this helpful (1)

Recommend to a Friend

A fun tool to use!

5.0

This solder sucker makes removing a component fun and quick. Easy to use, component safe, gets all the solder even on double-sided PCB's!

on Feb 12, 2021 I found this helpful (1)

Recommend to a Friend

Awesome - should have bought it years ago

5.0

I hated having to desolder something with a solder sucker (I think I was the sucker...) and/or desoldering braid. Using this thing is so easy. Heat it up, put it over the pin and when the solder melts pull the trigger. My Scottish heritage made me have doubts about the value for dollar. Boy was it wrong. This thing is worth every penny. I spent more than 30 minutes removing one of 3 pots on aboard with a "good" solder sucker and braid. So I gave up and put that board aside. I then ordered this and to try it out for giggles more than anything, I took this desoldering gun to the other two. I was done in a couple minutes - cleaner, faster, no damage and without headache.

Verified Purchase Robert Porter on Feb 10, 2021 I found this helpful (3)

Recommend to a Friend

Great Scope

5.0

Well packaged; received quickly. Still learning how to use it, but many resources are available online.

Tim White on Jan 29, 2021 I found this helpful (0)

Recommend to a Friend

Handy Dandy

4.0

Great for removing solder and extracting components safely.

Verified Purchase Anonymous on Jan 27, 2021 I found this helpful (0)

Recommend to a Friend

great soldering iron

5.0

I've purchased several things from TEquipment. Great products and fast shipping. I recommend.

Anonymous on Jan 23, 2021 I found this helpful (0)

Recommend to a Friend

Great service from TE Equipment

5.0

Overall one of the easiest and most painless purchases I have made. I bought this oscilloscope for my daughter and she is very happy with it. Great customer service and fast (!) shipping!

Anonymous on Jan 23, 2021 I found this helpful (0)

Recommend to a Friend

Excellent First Choice for RC Electric Soldering

5.0

Since involving myself in Radio Control electric planes, all my soldering jobs were done by my Local Hobby Shop. They stopped doing that and I was left without a solution. My requirements involved components with a wire size from 10-14AWG for large batteries and barrel connectors that range from 3.0-4.0mm diameters of gold-plated material. Too expensive to screw up! Especially when some plugs are encased in a silicone housing. Apply excessive heat and they will melt to the point where they become distorted and not safe to use. The LHS uses the Hakko 951 which they use on a near daily basis. A step down from that is the FX888D-23BY. After 2 months of usage, it has turned out to be a great choice. It is easy to use and amazingly effective. It makes my soldering jobs look like I am a pro. No more wasted connectors, and no more frustration. I am totally satisfied with TEquipment's price for this great little machine which is a complete soldering station for my needs. It didn't take me long to figure out how to get it going. Of course, a few YT videos, the right solder wire, and flux made my success easier to arrive at. I recommend this station to any one with similar needs as mine.

Alamo Stetson on Jan 23, 2021 I found this helpful (1)

Recommend to a Friend

My son loves it!

5.0

My son mentioned that he would like an oscilloscope (I didn't even know what that was), so Christmas was the perfect time to get him one. He loves it and says he would highly recommend it to anyone in the electrical engineering field.

Samantha Carman on Jan 21, 2021 I found this helpful (0)

Recommend to a Friend

Review on Rigol DS1054Z

5.0

Nice oscilloscope, I easy to work with.

Perfect oscilloscope, I am very happy to work with. on Jan 15, 2021 I found this helpful (0)

Recommend to a Friend

Such a good buy!

5.0

Great features for a great price. The measurement soft keys on the left are really handy. My only complaint is the refresh time while changing the horizontal and vertical. It is slower than other digital scopes to update as you are making those adjustments. All is well though once you arrive at your desired level, so it's a minor concern. I'm using this for DIY audio based projects and it has been a great choice for that kind of tinkering.

Verified Purchase Tim D on Jan 13, 2021 I found this helpful (0)

Recommend to a Friend

Good tool

5.0

Just used my new Hako FR-301 today , I am working on vacuum tube equipment, the Hako works very well removing large amount of solder on tube socket tabs. Haven't had time to try it on PCB yet but I'm sure it will work well there also.

Verified Purchase Davide on Jan 07, 2021 I found this helpful (0)

Recommend to a Friend

Very Nice Scope

5.0

This is a great scope! Very user friendly, which is important when trying to teach students that have never used an O-Scope before. The display is easy to read and full of information, and there are a lot of extra built in functions for special applications.

Tim on Jan 05, 2021 I found this helpful (0)

Recommend to a Friend

A solid scope at a great price

5.0

I've bought two of these for myself and for my student team, and they've both performed admirably. You won't find a better entry-level scope for the price, especially with 4 channels and probes.

Anonymous on Dec 25, 2020 I found this helpful (1)

Recommend to a Friend

Hakko FX888D-23BY

5.0

Great iron! I been using an 20 dollar unit. This kicks a$$.

Verified Purchase Jose Desousaj. dEsOUSA on Dec 20, 2020 I found this helpful (0)

Recommend to a Friend

Great value

5.0

We have 2 laboratory environments and have purchased this unit, the DP832, and also the DP832A. Both are nice, reliable units for the money. The DP832A has been in service now for about 2 years. The DP832 we just bought for our 2nd lab. My only complaint is that the display is pretty small, but at my age, all of them are small :-) The round keypad took some getting used to, but overall they have been a good purchase.

Anonymous on Dec 07, 2020 I found this helpful (1)

Recommend to a Friend

Hakko FX888D

5.0

Nice, beats my 25 dollar unit of 15 years.

Verified Purchase J DeSousa on Dec 02, 2020 I found this helpful (0)

Recommend to a Friend

Quality Product

5.0

Quality product but you should check out soldering stations on YouTube. This technology is quite old and for the price, it's quite a lot. The soldering station takes around 25 sec or so to reach the default 700 Degrees F. It can seem like a long wait if you need to turn it off for a bit and turn it back on. As most reviewers mentioned, the interface is not intuitive at all. But regardless, I'm still pleased with the product.

Verified Purchase Timothy Chan on Dec 02, 2020 I found this helpful (1)

Recommend to a Friend

Hakko FX888D

5.0

As always when dealing with tequipment the item showed up before the deadline. Well packaged. The Hakko is a great little soldering station. My only regret is I didn't order one years ago, looking back at all the cheap crap I've 'made work' seems like it cost me more than what would have if I just ordered the right tool for the job. Lesson learned.

Will Masters on Nov 30, 2020 I found this helpful (6)

Recommend to a Friend

Nice soldering station

5.0

Works great! Worth every penny.

Verified Purchase DW on Nov 27, 2020 I found this helpful (1)

Recommend to a Friend

Halko FR-301

5.0

I’m really pleased with this desoldering tool. Desolders perfectly so the component can be removed easily. So much better than my vacuum sucker - no comparison.

on Nov 27, 2020 I found this helpful (1)

Recommend to a Friend

Hakko FR-301 Desolder Tool

5.0

Best tool for desoldering you will find. Heats up fast and desolders fast and clean. Highly Recommended.

Hakko FR-301 on Nov 23, 2020 I found this helpful (0)

Recommend to a Friend

Great tool at a reasonable price

5.0

I am retired electronics design engineer and my hobbies include ham radio which involved, in some cases, building and repairing new fangled electronics (i.e. SMD and thru hole digital and analog pc bds). It became quite apparent that my old tools (e.g. soldering iron, solder sucker) were just not up to the task. So I indulged in the purchase of the Hakko FR-301 desoldering tool. Expensive for a hobbyist? Yes but worth every cent.

Anonymous on Nov 16, 2020 I found this helpful (0)

Recommend to a Friend

Very nice lab supply for the serious hobbyins

5.0

Pros of this power supply: - Clear and easy to read display - The three outputs are very convenient for my typical use of bipolar rails for opamps/etc and a 5v or 3.3v rail for microcontrollers. - The combination of rotary encoder and circular number pad makes editing parameters pretty easy. Cons: - Channel 2 and 3 share a common terminal, not a huge deal. - I would prefer a number pad with a square layout, but it doesn't take long to get used to. - The fan is a little noisy, but this is to be expected. Overall: I like it, other top contenders were a GW-Instek unit with potentiometers instead of encoders/number pad, and a Siglent unit. The Rigol was a little more expensive than either of these, but I'm happy with this choice.

Verified Purchase Anonymous on Nov 11, 2020 I found this helpful (0)

Recommend to a Friend

Very capable scope

5.0

This scope is very capable, and moreso because it comes loaded with measurement tools thanks to the unlocked extra software straight from TEquipment. Quality build throughout. I'm older so I normally use reading glasses, and they do help with this instrument to read some of the smaller text (some of the on-screen text can be enlarged via settings). Some reviews speak to the fan being noticeable, but really, I did not think it was noisy at all - just a light rushing fan sound like you'd expect. Being lazy, I uses Auto a lot, which is a nice feature. Although feature packed, it will still make a good scope for the beginner to learn on - everything is there. For me, I am learning a lot in the world of digital scopes since I come from using older analog scopes. For new users, I recommend the Quick Start it's a great way to walk-through the buttons and commonly used features features.

Verified Purchase Mike Mayer on Nov 10, 2020 I found this helpful (0)

Recommend to a Friend

Hakko FR-301 makes desoledring easy

5.0

I repair vintage computers and hardware that have a lot of through-hole components. This has made it a dream. Projects that took hours using solder wick now take minutes. Well worth the investment. Got mine at a great price at TEquipment. Cheaper than Amazon.

Douglas Finn on Nov 05, 2020 I found this helpful (0)

Recommend to a Friend

Excellent tool

5.0

Several years ago I bought a Hakko 808 desoldering gun and was reasonably happy with it. For a couple years now it's been getting less effective so I thought I'd try the 301. Huge difference! The 301 works almost instantaneously and if this one breaks, is stolen, or is otherwise gone from my bench, I'm buying a new one immediately. What a great tool.

Thomas Gruning on Nov 05, 2020 I found this helpful (0)

Recommend to a Friend

Awesome

5.0

This Scope is worth every dollar and has even more features anyone can ask for especially at this price range. The build quality is amazing and the material is solid. It also comes with a huge screen which is already a luxury feature more expensive scopes tend to have.

Verified Purchase Damion Chau on Oct 16, 2020 I found this helpful (0)

Recommend to a Friend

more than just an entry level scope.

5.0

Good software package . 4 channels so working on stereo amps is easier able to see input output of both channels at the same time . FFT work for audio .

Triodethom on Oct 14, 2020 I found this helpful (0)

Recommend to a Friend

Hakko FR-301

5.0

I think I was wasting all my time using a lot of different desoldering tools. At the moment I start to work with this great too I become the happiest man with an electronics hobby! Hakko does an excellent job. Just a pleasure to use this desoldering gun equipped with great powerful pump!! Highly recommend it!!

Verified Purchase ivo kunchev on Oct 12, 2020 I found this helpful (1)

Recommend to a Friend

Excellent workbench power supply

5.0

I ordered this power supply to replace a old Tektronix PS280. I get addicted to the dial number. It is easy to get precision. The fan is not as noisy as early releases. I would recommend it.

Excellent on Oct 05, 2020 I found this helpful (0)

Recommend to a Friend

Compared to a 4 channel Instek

4.0

Getting my new Rigol with options bundled included I was eager to see the options. With the usual new equipment jitters, I was pleased to see they were all installed and I didn't have to do any downloading, etc. I wanted to see how the Rigol stacked up. From a Youtube review I knew the blue and green traces were similar. They are. The green I would say is teal but practically, light blue. However the 2 "blues" are distinguishable so not a problem. The pink I call purple. Also from a review it was known the font sizes of letters are small. They are. Some are quite small such as measurement data. It may be a problem. Not so good, I like the looks seeing an actual unit rather than pictures. From pictures I had thought it had a poor style to the design. Sharing a common control for vertical didn't pose much of a problem. Though at times switching trigger and back to which vertical channel I wanted did seem to be a lot of fiddling. A few cons. The select switch slips a lot making for a wrong selection. I talked to a guy at Rigol and he says he gets that a lot. He says muscle memory comes into play. I suppose. Also it's a hard press. Mechanically I wonder how long that switch will hold up. In acquisition the manual led me to believe I had a choice other than sin(x)/x. Apparently not, talking to Rigol. But the manual is for the 1000 series. Maybe so on other scopes. The screen appears smaller with the left menu. For holdoff ranging my Instek is better. I'm spoiled. The holdout is good though. For pros I like having hi res. I can see differences using it. While maybe old hat nowadays I think it's a great feature to have. Also Pattern triggering is potentially very useful. There are several other triggers I didn't have. Also in Math the option of being able to perform logical operations is exciting. In general usage the triggering is fine as is using different memory depths. While writing a review not a comparison, I say my Instek is the better performer for ease of use and functionality and the Rigol has more versatility. Right now, being a new scope for me, the Rigol is my main interest.

on Oct 04, 2020 I found this helpful (2)

Recommend to a Friend

Better than Expected Vacuum

5.0

Good vacuum for self contained unit. Nice case as well.

Anonymous on Oct 03, 2020 I found this helpful (1)

Recommend to a Friend

Hakko FR-301

5.0

Great tool. Works fantastic. Wish I would have gotten one years ago.

John M Philip on Sep 30, 2020 I found this helpful (1)

Recommend to a Friend

Fantastic scope for the price

5.0

They pack a lot of nice features into a fantastic price point. Good choice for an entry level scope!

Bradford M on Sep 28, 2020 I found this helpful (0)

Recommend to a Friend

Great Tool

5.0

The reviews were good on this desoldering tool so I expected it to work, but it surpassed my expectations. It makes desoldering fun instead of frustrating. It works just like you would expect. The tip works like a soldering iron with a hole in the middle - you hold it on the pin you want to desolder until the solder melts, then pull the trigger and it sucks all the solder off instantly. This tool is a real keeper. I considered buying one of the cheap ones from another vendor, but after using the Hakko, I'm glad I paid for a real professional tool. It pays to spend a little more when something really works like it should. I highly recommend it. I bought the kit with all the tips and the stand and I'm glad I got everything so I'll have what I need.

FRED TRAVERS on Sep 21, 2020 I found this helpful (1)

Recommend to a Friend

Good tool, reasonable shipping cost

5.0

Good tool, fast shipment, correct voltage for US/Canada.

Art on Sep 18, 2020 I found this helpful (1)

Recommend to a Friend

Amazing Tool!

5.0

Very well build & easy to maintain. I give it 5 STARS well deserved :)

Verified Purchase Downhillsyl on Sep 14, 2020 I found this helpful (0)

Recommend to a Friend

Well worth the investment

4.0

I bought this tool to desolder some components from multi-layer PCBs where I was finding my other spring-solder suckers were not working well.. This tool is really good for that. Its almost makes it fun to do desoldering. It safely removed my micro-switches and other components from my multi-level PCBs with NO Damage. And it was fairly quick to remote these components — those I did get the occasional lead that required me to reflow solder into the eyelet, and then desolder again. But even so — it did a super job doing this. It has four heat settings. I had to used setting 4 for the multi-layer PCBs. I also removed quite a number of burned out LEDs from a single layer PCB. Setting 1 was adequate for this. This was where it was really “fun” to desolder, as it only took about two seconds per leaded to de-solder, and quite literally the LEDs DROPPED from the PCB after I desolder red them, and the resulting PCB pads remained in MINT condition. I was really impressed. I didn’t find the unit got too hot too hold, and it was lightweight, and comfortable to hold. The only thing I would suggest to people considering buying this, is to make sure you buy one of Hakko’s drill cleaning bits when you get this unit. The poker that comes with it will not always clean the desoldering tube and it might become totally clogged. However if you have the cleaning drill, it is relatively easy to clear up solder that might be blocking the tube. Over all, I would highly rate this.. I wish I had purchased this years ago. It would have made it so much easier for me!

Hakko FR-301 is a great tool for desoldering! on Aug 31, 2020 I found this helpful (2)

Recommend to a Friend

Hakko FR301 Kit 2

5.0

Purchased from TEquipment, and shipped for free: 'FR301 Kit 2' which includes the Hakko de-soldering gun, 4 de-solder tips of various sizes, 633-01 Iron stand and a few cleaning tools. Several years ago, I purchased the Hakko FX-951 Soldering station that I am extremely happy with. Based on the quality of FX-951, I felt their de-soldering gun, FR301, would be the obvious choice. Hakko FR301 has exceeded my expectations for a self-contained de-soldering tool - hands down beats manual bulb and plunger style solder suckers.

Verified Purchase Paul on Aug 26, 2020 I found this helpful (1)

Recommend to a Friend

Nice Upgrade

5.0

This soldering iron was a huge upgrade from the cheap one I bought at Walmart. It keeps heat and distributes it evenly. Very nice for smaller components that need precise heat. Would definitely recommend. Worth the price.

Verified Purchase Ryan on Aug 25, 2020 I found this helpful (2)

Recommend to a Friend

The right tool for the job

5.0

If you have ever had to de-solder anything, you know how much fun it can be with sub-standard tools. This tool makes the job almost like magic! It works really well, just make sure you have a few tip sizes to choose from.

Anonymous on Aug 24, 2020 I found this helpful (1)

Recommend to a Friend

Met my needs, exceeded my expectations

5.0

I can't believe I waited so long to get this power supply. This power supply had all of the features I was looking for and the build quality exceeded my expectations. As a hobbyist, I could have gotten a cheaper power supply but I'm glad I didn't.

Verified Purchase Dave on Aug 21, 2020 I found this helpful (1)

Quality is not as good as it was

3.0

This is my second DS1054Z first one was good But unfortunately, this is a common practice among Chinese company as soon as they earn your trust they will cut from every possible corner to increase their benefit margins quality of probs on this one was horrible in another word if you buying this consider to buy 4 probs the device itself is very laggy and slow and inaccurate but it is cheap very cheap if you can spend a little more buy American models like Keysight unfortunately, this was not possible for me since organisation budget was limited

Verified Purchase Farshad on Aug 18, 2020 I found this helpful (4)

Recommend to a Friend

it's The One

5.0

It's never let me down

Sam Rad on Aug 13, 2020 I found this helpful (2)

Recommend to a Friend

Get it! its worth every penny and will save you from so much frustration!

5.0

ive been using the classic 20 dollar bulb suction de soldering iron for years. that thing was a hit and miss i would often damage traces trying to get chips off with it. after breaking a few game consoles over the years i finally took that piece of crap and tossed it and broke down to get this. this desoldering gun is night and day difference i cant recommend it enough!!! don't waste your time with the cheap alternatives! this just work 100% of the time its also much faster than the cheap methods. the time it takes me to remove a chip is cut in half and it comes off with out breaking traces and no flux required either! clean up is a breeze too! Just get it! You wont be disappointed!

Verified Purchase Dave on Aug 05, 2020 I found this helpful (1)

Recommend to a Friend

Terrific Scope

4.0

Feature packed oscilloscope. Great value. I love this product

Verified Purchase Rick K on Jul 24, 2020 I found this helpful (0)

Recommend to a Friend

Great balance between price, quality and features

5.0

Got my DP832 coupe of weeks ago and it did not disappoint. It is so convenient to have 3 channels. Great precision. Easy to program it. Provided Windows software is very convenient. Connecting it to LabView opens a whole new world of possibilities.

Verified Purchase Gaston on Jul 22, 2020 I found this helpful (1)

Recommend to a Friend

Worth the Extra $

5.0

Great tool. Well built with convenient features like an on/off button on the handle, and a temperature dial. Makes the less expensive brand/model I bought (that's being repaired) look amateurish. TE shipped it quick and had a good price.

Verified Purchase Juan Calvillo on Jul 20, 2020 I found this helpful (1)

Recommend to a Friend

I can’t recommend this enough

5.0

I was tired of using a soldering sucker and soldering wick, so I started looking at desoldering guns. I wasn’t sure if I wanted to go with Hakko or the cheap China knock off, but I am glad I went with the Hakko. This is a quick desoldering gun that will make your life so much easier,

Verified Purchase Kirk on Jul 16, 2020 I found this helpful (1)

Recommend to a Friend

Best soldering gun

5.0

I have been soldering for years mostly using cheap soldering irons but having to replace them often. This gun is extremely reliable and heats up really fast.

Verified Purchase Kirk on Jul 16, 2020 I found this helpful (1)

Recommend to a Friend

Works well

5.0

It works well and I like its compact size. I have an old Pace solder sucker and vacuum pump that works well but is just too big and bulky. It takes up way too much room on my bench. This is so much nicer.

on Jul 12, 2020 I found this helpful (1)

Recommend to a Friend

Fantastic tool

5.0

I realized I was using a sucker pump for almost 30 years, so It got to be better tool for it. Here it is. This desoldering tool is so easy to use, works very well, easy to clean. I do the 3 hours job in 15 minutes with it, and without overheating the components. A real game changer for me.

Verified Purchase Brice on Jul 07, 2020 I found this helpful (1)

Recommend to a Friend

Great Soldering Station

5.0

I picked this soldering station up recently and I am very pleased with my purchase. The unit is built very well and is reasonably priced. It’s a pleasure to use. Highly recommended!

Verified Purchase Ron Franks on Jul 07, 2020 I found this helpful (0)

Recommend to a Friend

Great Value

5.0

I agonized over which oscilloscope to purchase for weeks. I finally decided on this one and couldn’t be happier. It’s a great value and I have no regrets at all. Recommended to all who are in the market for an entry level scope.

Verified Purchase Ron Franks on Jul 07, 2020 I found this helpful (0)

Recommend to a Friend

Lots of features packed in for a good price

5.0

I thought I would be spending at least $600 on a decent oscilloscope. especially with four channels. This lower cost equipment works fantastic and first time I powered it up to test it , I found it intuitive to use and easy to access the features. I would suggest this unit to anyone who needs to troubleshoot their electronic projects.

Verified Purchase Charles Tuttle on Jul 06, 2020 I found this helpful (0)

Hakko FX888D works great, but terrible controls.

2.0

This iron can definitely put out and maintain some heat, build quality feels excellent, but unless you solder at a fixed temperature, changing the temperature will be quite frustrating. Only after calling Hakko support have I got it working properly, they are very helpful and quite familiar with this product and how to correct the settings (I wonder why). Despite how well the iron works, having to memorize or look up how to use a SOLDERING IRON is insane. I would have never guessed it possible to over engineer a soldering iron.

Verified Purchase Francis on Jul 05, 2020 I found this helpful (1)

Recommend to a Friend

Hakko FR-301

5.0

I've used a Hakko soldering station for years so I know and trust the brand but I always used a solder sucker for de-soldering. A tool like the Hakko FR-301 just seemed like an extravagance but I finally decided to spring for one. It's so much faster, cleaner and easier on your circuit board I'm really sorry I waited so long. There are Chinese knock-offs of this but they just don't work well, get the real thing.

on Jul 05, 2020 I found this helpful (1)

Recommend to a Friend

Much Better Desoldering Tool

5.0

The Hakko FR-301 is much better desoldering tool than using the old manual method especially if you are working with multiple projects in a day. Very clean results, easy to use and maintain. I ordered 2 other tips for thicker wires and heavier solder removal. No issues so far after a month of usage. Highly recommended.

Verified Purchase Allan on Jun 27, 2020 I found this helpful (1)

Recommend to a Friend

Can't beat it for the price

5.0

While this scope has a few minor flaws, it's really an excellent value for the price - especially now that it comes with all features (except 100mhz) unlocked from the factory. Yes the UI is kind of laggy, and the interface can feel cluttered and a bit unintuitive. But I just can't knock an oscilliscope that has four channels and all of these features (especially I2C and SPI decoding) at a price that's accessible to hobbyists.

Verified Purchase Anonymous on Jun 26, 2020 I found this helpful (0)

Recommend to a Friend

The best I've used

5.0

Much better than previous desoldering stations I've owned, and is by far the least expensive. Very powerful, nice complete removal. Extremely easy to clean.

on Jun 22, 2020 I found this helpful (2)

Recommend to a Friend

Hakko FR-301

5.0

This device was recommended to me by another tech. I have had other auto desoldering tools but this one is far superior. Works like a charm, doesn't clog and keeps the work moving. Highly recommended.

Verified Purchase Daniel A Lurie on Jun 17, 2020 I found this helpful (1)

Recommend to a Friend

Hakko FR-301 pays for itself

5.0

This is my 2nd Hakko FR-301. My first was from Japan, but I recommend sticking with a US version, if you're in the States. It's also important to use the correct nozzle for the job, ensure it stays clear of solder clogs, and is generally used properly.

Verified Purchase Erich Moraga on Jun 11, 2020 I found this helpful (1)

Recommend to a Friend

Good Oscilloscope for the cost.

4.0

The Rigol DS1054Z is a very good choice for an entry-level oscilloscope. It is packed with features and having 4 channels is a definite bonus although having a single, shared set of vertical scale and offset controls takes some getting used to. Two disappointments are imprecise voltage measurements and not being able to turn off the display of inputs used in math operations.

Rigol DS1054Z Performs Well on Jun 11, 2020 I found this helpful (1)

Recommend to a Friend

The Standard for Our Repair Shop

5.0

This equipment gets used daily and I have just recently purchased an additional 2 for our shop based on the reliability and performance of one purchased several years ago.

Verified Purchase Katy on Jun 10, 2020 I found this helpful (0)

Recommend to a Friend

Excellent scope for any hobbist

5.0

Four channels, bright screen, single step triggers, external storage for capturing traces for the money this scope simply cannot be beat.

Joe OConnor on Jun 09, 2020 I found this helpful (0)

Recommend to a Friend

GREAT VALUE! Awesome scope!

5.0

I was set to buy a used Tek portable Digital scope. then I saw the Youtube videos about this Rigol DS1054Z and I made the decision to purchase it. I am so happy with it I started a Rigol DS1054Z users group on facebook! What an Awesome bargain!

Anonymous on Jun 09, 2020 I found this helpful (1)

Recommend to a Friend

Great Power Supply

5.0

This is built like a tank and performs to specification. The display is clear and bright. The circular keypad looks odd at first but is very usable once you get used to it. LAN and USB plus outputs are available on the rear of the unit. Many upgradable features. I have bought 2 of them.

Verified Purchase Nuddimud on Jun 07, 2020 I found this helpful (0)

Recommend to a Friend

Very Good Supply

5.0

This is the 2nd DP832 I have bought. The supply is very well built and performs within its specification. The binding posts are standard width and of a very high quality. All the connections you are likely to need; LAN, USB, etc are on the rear. It has many upgradable features that can be added if desired. The circular numeric pad looks weird at first but it's actually very intuitive once you get used to it.

TedM on Jun 07, 2020 I found this helpful (0)

Recommend to a Friend

Great product at a great price

5.0

Soldering iron works as advertised, lots of different tips available for whatever the use case is.

Verified Purchase Aaron on Jun 04, 2020 I found this helpful (0)

Recommend to a Friend

Great little scope!

5.0

I still have 1 year left of the waranty though I am sure I will not need it. The bang for the buck on this scope is great. I have had it for 2 years and it has done anything I have asked it to do. I mostly work on audio equipment. The full software upgrade package came with it when I purchased it and the software lifts it from a OK deal to a NICE deal! It is small and light enough to be portable and I have a Pelican knock off water tight case with foam inserts purchased from Harbor Freight for travel, it is well worth the price at around $20-$30.

Verified Purchase Wayne Parris on Jun 03, 2020 I found this helpful (0)

Recommend to a Friend

Great Workhorse Iron

5.0

I do a lot of soldering at home and at work on a variety of circuits, big and small, and this iron has never let me down. Heats up quick and stays hot, and the iron itself feels great and ergonomic. The user interface is confusing but well-documented, and for how I use it, I've never needed to make any adjustments so it's only a minor annoyance. I'd recommend this in a heartbeat.

Verified Purchase Evan on May 19, 2020 I found this helpful (1)

Recommend to a Friend

Rigol DP832 Great Power Supply

5.0

I want to start with complementing the great customer service assistance for my first purchase with TEquipment. The Rigol DP832 Power supply has been a great addition to my home lab, especially with the new normal of working from home due to COVID-19. The power supply is very well constructed and very user friendly. The user manual was clear and easy to understand. The power supply was easy to get up and running and the accuracy is amazing. Overall very satisfied with the performance and accuracy of my new power supply.

Verified Purchase Anonymous on May 17, 2020 I found this helpful (0)

Recommend to a Friend

Great soldering station!

5.0

I would have never been able to solder circuit boards on flight controllers without this tool. Unlike some reviews, I found it easy to navigate the menu. It is super easy to change temperatures while on the fly. Heats up in seconds which is amazing and also cools down quickly to change tips. Haven't got into the programming presets but I'm sure its not difficult.

Kevin on May 15, 2020 I found this helpful (0)

Recommend to a Friend

Hakko FR-301

5.0

Seems like a well built tool..It works very well..After using it I would be very sad to have to go back to the old bulb and braid technique.

Verified Purchase kris nauman on May 13, 2020 I found this helpful (1)

Recommend to a Friend

Solid

5.0

This has proven to be a great addition to my home lab. I recently needed to test a dc-dc power converter that took 12v in and output several different voltages. Parts of the circuit were blowing trace fuses and others were having voltage issues. The clean power from this supply along with the overcurrent protection made for a great bench test setup.

Verified Purchase Alex on May 12, 2020 I found this helpful (0)

Recommend to a Friend

Rigol DS1054Z

5.0

Excellent product, value and customer experience. No Cons at this point, only Pros. Unit arrived and works as expected. Product is getting a bit "long in the tooth" and would have loved a newer product design before purchasing but overall a great product. Very predictable use, well supported and documented by Rigol and by user community (social media and multiple forums).

Anonymous on May 07, 2020 I found this helpful (0)

Recommend to a Friend

Reviews are on spot!

5.0

Great tool for beginners and novice hobbyist. Will grow into this as my skills develop. Well built and worth the price.

Verified Purchase Bryan B on May 07, 2020 I found this helpful (1)

Recommend to a Friend

Unbelievable scope for the price

5.0

I’m thrilled with this scope, after three weeks of ownership. I’m using far more of the advanced features than I anticipated. In this price range, I hadn’t been even thinking of targeting needs like RS232 decoding and triggering, SPI, I2C etc. But being able to cross reference serial comms from my Arduino back to the PC with what’s going on with the downstream electronics has been amazing. I’ve also been using the third and fourth inputs on the scope to give programmatic triggering of the scope from my Arduino - which helped me track down a poor clock signal in a project I was building. The product builds overall feels very high quality. Very solid, reasonably heavy. Probably the only negative is that the entire width of the screen can’t be used to see the signal, but that’s a pretty minor concern, the screen is already quite wide. Overall, this is a 10/10 product

Verified Purchase Cormac on May 06, 2020 I found this helpful (0)

Recommend to a Friend

An excellent scope at an outstanding price!

5.0

I purchased this scope to replace my aging Tektronics 2245 analog scope in my classroom. Wow! What a great scope! I can do a variety of demonstrations and measurements, I can save them to a USB stick and use them in presentations, I can actually show my students 3 phase power... the list goes on and on. This is a 4 channel scope with all of the versatility of a much more expensive scope, at a bargain basement price. If you are looking for a scope for educational, hobby or even test bench use, this is the scope to buy.

Verified Purchase Jeff Greenly on May 06, 2020 I found this helpful (2)

Recommend to a Friend

Hakko FR-301 - Great tool

5.0

I replaced my heavily used older model Hakko desoldering tool with the FR-301. I have used it to desolder point to point solder joints in a tube amp and to desolder IC pins on a switch mode power supply board. It performed flawlessly. I really like the new style filter/ pre-filter setup.

Verified Purchase Michael L Lloyd on May 06, 2020 I found this helpful (1)

Recommend to a Friend

Great for beginners

5.0

I got this as a beginner oscilloscope as I no longer have access to one from school (covid). I'm very happy with it and haven't encountered anything that I"m not able to do. I'm sure I'll upgrade in the future but it might not be for a while considering how happy I am with this one.

Anonymous on May 05, 2020 I found this helpful (0)

Recommend to a Friend

Outstanding Scope For The Money

5.0

This is a fantastic hobby level scope. Many features, most of which will rarely be used as a hobbyist but they are there none the less. Interface is pretty easy to use and well laid out for the real estate available. This is my first digital scope and I'm glad I went with Rigol the first time around.

Dan on May 05, 2020 I found this helpful (0)

Recommend to a Friend

RIGOL DS1054Z - best in a class

5.0

Perfect digital scope for signal visualization. Working fine, done well. RIGOL have to fix problem with High Resolution 12 bit acquisition mode- it just absent. Declared but absent.

Gennady on May 05, 2020 I found this helpful (0)

Recommend to a Friend

Haako FX-888D

5.0

Nice solder station kit. Combo kit came with extra tips (good selection!) Should read the manual first to figure out how the controls work, but you can just set the temp and forget it if you're doing simple soldering. Perfect for hobbyists, makers, amateur radio, etc. Simple for younger users, too.

Verified Purchase KD9CJX on May 04, 2020 I found this helpful (1)

Recommend to a Friend

Great scope

5.0

This has been a great scope for the price. Once you go to four channels you can never go back!

Jonathan Spencer on May 03, 2020 I found this helpful (0)

Recommend to a Friend

Best scope I have ever used

5.0

I got this scope because my are not what they used to be, on top of the bigger screen and 4 channel I can use it to check out caps that look good but are no, and check signals in tv's without pulling the board out first.

Verified Purchase Roger w Peckenpaugh on May 03, 2020 I found this helpful (0)

Recommend to a Friend

Cannot go wrong with Hakko

5.0

Solid tool for a honest price! This is a small enthusiast tool, but it is more than capable for small shops or home DIY projects. Besides, it is still a Hakko... So you know you'll get a quality tool and a warranty you can count on.

Verified Purchase Anonymous on Apr 30, 2020 I found this helpful (1)

Recommend to a Friend

Highly Recommended Desoldering Tool

5.0

If you have ever watched someone use a manual desolder pump and soldering iron you know the pains of desoldering. Besides the snail like pace, broken pads and traces occur with frequency, especially on older boards. I recently picked this one up and have already desoldered multiple ICs and components with ease on vintage boards. Just remember to use the included cleaning rods if you notice its not pulling up the solder or the end looks sealed.

Verified Purchase Anonymous on Apr 24, 2020 I found this helpful (1)

Recommend to a Friend

WOW!

5.0

Unbelievable hobby scope: I've barely tapped the capabilities of the unit, but it does all the basic things you would expect of an oscilloscope effortlessly and very well. The value is incredible. I am enticed by some of the features on the higher end scopes, but for as infrequently as I would use them, this is a sweet spot on a price/performance curve and an absolute bargain. Considering the only reason I am likely to use 4-channels is because they are there, the higher bandwidth of the DS1202Z-E might have been a better choice in the long run, but I don't know how I could have gone wrong with either.

Verified Purchase Robert Marino on Apr 24, 2020 I found this helpful (0)

Recommend to a Friend

Rigol DS1054Z

5.0

Needed to add a digital scope to the bench and couldn't be more pleased. The price per capability cant be beat.

Verified Purchase Ernest on Apr 23, 2020 I found this helpful (0)

Recommend to a Friend

Rigol DP832

5.0

Great Power Supply with all the capabilities I was looking for. Well built and good price.

Verified Purchase Ernest on Apr 23, 2020 I found this helpful (0)

Recommend to a Friend

Fantastic product, highly recommended!

5.0

Project would have been a headache to complete without this handy tool. Great stuff!

Verified Purchase Anonymous on Apr 19, 2020 I found this helpful (1)

Recommend to a Friend

Great power supply!

5.0

I couldn't be happier with the DP832. For the price, ease of user interface, well written user manual and the reliability I am fully satisfied. I've used this DC power supply to operate sensitive laser diode drivers, LEDs and ITO glass projects over the last 15 months. Rigol also has great tech support people, so if you ever have questions they are only a phone call away. TEquipment has been a no hassle supplier for many of my electronics needs and I plan to continue doing business with them.

Randy Mercurio on Apr 17, 2020 I found this helpful (0)

Recommend to a Friend

Professional Quality

5.0

Excellent professional quality tool. Unit comes with a storage case and options for a wide variety of tips. Tip changes are made with a very effective accessory tool and cleaning the chamber is intuitive and easy. The tips need to be stamped for better identification. A minor inconvenience. The vacuum is strong and the adjustable heat settings are more than adequate for most all projects. The included tip stand functions with the tool laying on the bench. Not as convenient and takes up precious bench space. The addition of the Hakko 633-02 can be incorporated for holding the tool in the vertical position for storage. A well made solid feeling tool. I like it!

Windlord on Mar 27, 2020 I found this helpful (1)

Recommend to a Friend

Quality Product

5.0

The De-soldering tool performs above expectations. Powerful suction and adjustable heat. The additional tips available make the tool extremely versatile. The only suggestion is the lack of recognizable size markings on the tips. The tool performs marvelously with a flexibility of settings that challenge your imagination for the 'perfect" settings/tip for each situation that arises. The cost and quality of the instrument puts it in the professional tool category. The deluxe setup includes the 633-02 Stand to store the tool upright instead of using the (included) tip rest with the tool lying down. I like it!

Windlord on Mar 27, 2020 I found this helpful (1)

Recommend to a Friend

Great power supply

5.0

This is a great supply, worth the money. We will be buying more..

Verified Purchase Anonymous on Mar 19, 2020 I found this helpful (0)

Recommend to a Friend

great product

5.0

worth the price, will last you a long time.

Verified Purchase Anonymous on Mar 12, 2020 I found this helpful (0)

Recommend to a Friend

Great Product

5.0

One of the best low budget oscilloscopes on the market (if not the best). For its 4 channels and easily hackable 100MHz bandwidth, this is a great purchase that will last you a long time.

Anonymous on Mar 12, 2020 I found this helpful (0)

Recommend to a Friend

Hakko FX888D-23BY

5.0

I am very pleased with the performance with my new tool. I have been using cheap soldering irons for a long time and the Hakko is a huge upgrade.

Verified Purchase Jim Tesseneer on Mar 09, 2020 I found this helpful (0)

Recommend to a Friend

Rigol O-Scope

5.0

It’s very nice. The only downfall on this piece of equipment is that I have to study to understand all of the excellent stuff it does. When this one wears out I’ll buy another one just like it.

Verified Purchase Mitch Mabrey on Mar 07, 2020 I found this helpful (0)

Recommend to a Friend

Excellent Value

5.0

I picked up this unit based on several recommendations from professionals. I'm very pleased with the performance thus far. I chose this because I wanted something that was of decent quality but I'm not a pro so I didn't want to spend hundreds. This is the perfect balance of quality and price. They even threw in a roll of solder, picked up the tax and gave free shipping.

Verified Purchase Lefty on Feb 25, 2020 I found this helpful (1)

Recommend to a Friend

Easy to use beginner oscilloscope!

5.0

This is a great entry level oscilloscope. I bought it to see the EFM signal from a CD drive. Lots of options, I heard it can be upgraded pretty easily by searching online!

Anonymous on Feb 22, 2020 I found this helpful (0)

Recommend to a Friend

Excellent functionality - best price on the Internet

5.0

The Hakko FR-301 is a very well made desoldering tool for sure. It's virtually fool proof to use. Saves time and components. I wish I would have known about this device sooner! Well worth the price.

Verified Purchase John A Justin on Feb 20, 2020 I found this helpful (1)

Recommend to a Friend

Great scope for a great price

5.0

I have only been using this scope now for a little less than a month, but so far I love it! I have been using it primarily for circuits at audio frequency, but plan on using it to troubleshoot some homebrew radio equipment that I have laying around too. The FFT Math function seems like it will be extremely useful for that! Seems like a good product and TEquipment had the best price that I could find when I was shopping around for it.

Eric on Feb 17, 2020 I found this helpful (0)

Recommend to a Friend

Rigol DP832

5.0

This is a nice unit, but pricey. Intuitive layout, but still a bit clunky with the circular input. They should have just given it a normal keypad layout. I doubt it was designed by EEs - we don't want eye candy, just easy-to-use and navigate. My unit has the slightest bit of drift prior to warming up, but stabilizes nicely afterward. Plenty accurate and stabile for the home/amateur setup. Very nice that they incorporated presets for regularly used settings. Build quality seems very solid.

Nice unit on Feb 14, 2020 I found this helpful (1)

Recommend to a Friend

De-soldering tool an excellent addition to my tools

5.0

This is my first de-soldering tool. I researched many de-soldering tools before making my purchase and even though this tool had great reviews I was still skeptical. Now that I have used it for a while I can`t imagine being without it. It very easily and cleanly pulls up the solder and cleaning the collection chamber is fairly easy too. I also love that it is not another a big box sitting on my bench. I haven`t tried an extended length tip but I suspect they will work well. Overall I really cannot complain about any aspect of this tool. I am VERY happy with my purchase.

Works BETTER than expected! on Feb 13, 2020 I found this helpful (1)

Recommend to a Friend

Very good tool.

5.0

Makes short work of desoldering. Even wire wrapped terminals are easy to remove.

Guy Arnold on Feb 10, 2020 I found this helpful (2)

Recommend to a Friend

Excellent station

5.0

Excellent station to use. Prior to this, used an iron with controls built into the handle. This station makes soldering much easier. Quick heat up and recovery times. UI leaves a bit to be desired, but perfection is a concept, not a state.

Verified Purchase Trent on Feb 10, 2020 I found this helpful (0)

Recommend to a Friend

Great value

5.0

This has been my go to power supply for some time now. Just wish it had a higher amperage.

Verified Purchase Matthew Schinault on Feb 03, 2020 I found this helpful (0)

Recommend to a Friend

Great device and options

5.0

It will take me quite a while to learn all of the features available with this oscilloscope and I am excited to learn! Saving bench footprint with this device is also important to me. Thank you for the Official options pre-installed as well.

Beautiful design with more functions then I dreamed of. on Jan 30, 2020 I found this helpful (0)

Recommend to a Friend

Fantastic Scope

5.0

Great scope for audio work. Would def recommend for someone's first scope.

Anonymous on Jan 16, 2020 I found this helpful (0)

Recommend to a Friend

Rigol DS 1054Z

5.0

I purchased an open box unit. Looked brand new.All the accessories were brand new. Works great!

LG Systems on Jan 09, 2020 I found this helpful (0)

Recommend to a Friend

Better than I expected

5.0

I went to trade school for electronics repair a couple decades ago. We learned to use solder wick and cheap solder suckers. I've been using those for years. I knew these desoldering irons existed but I thought the solder wick was fine (it does help that I have a nice JBC iron). Well I saw this in use on Youtube channel Mr Carlson's Lab and I decided to give it a try and WOW! I've used it to repair several items. I replaced some high current relays yesterday and I put this to power 3 out of 5 and I don't even think I needed to turn it up that much. It melted that stuff like butter. The vacuum function works really well. The only other desoldering iron I have owned in the past was a Radio Shack one many years ago that cost somewhere between $25 and $50 and that was totally useless. I can't compare this product to any other actual decent products. But for the price I doubt other brands would stack up. I do recommend getting a better stand. I don't really enjoy laying the iron on its side with the "stand" (more like tip protector) it comes with. But it does more or less work.

Verified Purchase Dan D on Jan 09, 2020 I found this helpful (2)

Recommend to a Friend

don't look further

5.0

We use those power supply everywhere. They are powerfull enough for what we do, 3 channels to power 2 differents devices plus the electronics in 5V, easily configurable. The ethernet communication make it easy to control from whatever software you want. If you buy the high resolution license, you have 3 digit precision on the screen ! Cheap for what is it and works fine.

Benoit Duret on Dec 30, 2019 I found this helpful (0)

Recommend to a Friend

Spectacular Supply

5.0

I have gotten a lot of use and had a lot of fun with this supply over the past two years. I don't think it can be beat for the price. One of the small things I really appreciate is that it continuously displays the voltage and current set points and over protection limits as well as the delivered voltage and current. I use a lot of small supplies at work and have found it way too easy to mis-set them. Current and voltage limiting features have saved several circuits.

Verified Purchase Jeff Roach on Dec 27, 2019 I found this helpful (0)

Recommend to a Friend

Love these

5.0

Just purchased another DS1054Z, I love these. So simple to use for my daily tasks. Considering one? Don't, just buy it.

Verified Purchase Craig Hollabaugh on Dec 27, 2019 I found this helpful (0)

Recommend to a Friend

Amazing

5.0

I'm stunned at the functionality for the price! Highly recommended.

Finn on Dec 18, 2019 I found this helpful (1)

Recommend to a Friend

Best scope in this price range!

5.0

The reviews say it all, this scope has a huge following across the web. It has proven very upgradable and reliable over the years I've owned it!

Verified Purchase Chris on Dec 16, 2019 I found this helpful (0)

Recommend to a Friend

Excellent power supply, cheap and full of features

5.0

Works perfect right out the box. I use to have a cheap power supply that was not reliable so I bought this and definitely I don't regret. Plenty of nice features and cheaper than other brands. It is a good quality power supply that works very well and fulfill it's promises.

Verified Purchase Diego Bouvier on Dec 15, 2019 I found this helpful (0)

Recommend to a Friend

Effective, cheap

5.0

This power supply is a must to have in a lab. There is 3 output, all 3 programmable. You will need licenses for the LAN connectivity and for the high resolution. By default, the display is "locked" to 1 or 2 resolution digit, but with a 100$, you can have the full resolution which is 3 ! The LAN connectivity make it very easy to program over ethernet and connect perfectly with LabVIEW. We have several of those units here and no problem !

Benoit on Nov 26, 2019 I found this helpful (0)

Recommend to a Friend

Perfect tool for reworking through hole PCBs and power supplies

5.0

This tool is a game changer. Successfully removed 40 pin DIPs which literally fell out of the PCB after unsoldering and large snap-in caps on power supplies without damaging the PCB. Heats up very quickly and has plenty of power to heat large ground planes to melt solder. Strong vacuum pulls the solder out in one trigger click. Easy to clean too. Well worth the investment!!

Anonymous on Nov 21, 2019 I found this helpful (0)

Recommend to a Friend

High Quality Soldering Station

5.0

Do yourself a favor and get a quality soldering iron like this Hakko. The base station is heavy and solid, it is well made, and even the stand is made of metal, decently heavy, with rubber non-slip feet. So it's not going to slide all over the place on your bench or get easily knocked over. The soldering iron itself has similar quality, and Hakko irons/tips are so good, there are a whole ton of cheap knockoff versions out there! This iron is a case of "one and done" - buy this one, and be done with buying soldering irons for a long, long time.

Verified Purchase Matthew on Nov 09, 2019 I found this helpful (2)

Recommend to a Friend

Excellent product, supper fast shipping

5.0

I used this iron regularly for the past four months. Never give a problem and very solid performance. With the fast shipping and price here, you cannot go wrong with this.

Verified Purchase Dave on Nov 08, 2019 I found this helpful (0)

Recommend to a Friend

Great scope for hobbyists and engineers looking to get started

5.0

I've wanted a scope for a long time at home, and after reading around I decided to splash for this one. I couldn't be happier! After setting it up, which wasn't very hard (although Australian buyers beware: you'll need to get your own power cable, it's just a regular PC supply cable so a 7 dollar one from a local store works fine) I turned a 5 hour troubleshooting session into a 10 minute fix. The 4 channels make repair and troubleshooting work a heap easier than a 2 channel scope and the menus are easy to learn.

Verified Purchase Anthony Lewis on Oct 28, 2019 I found this helpful (1)

Recommend to a Friend

Nice cheap escope.

5.0

Much more for much less. It perfectly suits a small and medium sized laboratory. It has several measurements that are found only on more expensive equipment.

Verified Purchase Alexsandre Avila on Oct 23, 2019 I found this helpful (0)

Recommend to a Friend

Awesome Value

5.0

I've used many o-scopes in my career as an EE since 1980. Now retired, bought this one for hobby and consulting work. This thing is a great value if you can live with 50 Mhz BW. So many cool, handy features that are easy to find and use. And at an astounding price! Tektronix, if you want to stay in the o-scope business, you better get after it!

Verified Purchase Bill Rodgers on Oct 20, 2019 I found this helpful (1)

Recommend to a Friend

FX888D Soldering Station

5.0

Great iron/station. Intuitive UI/controls, gets up to temperature fast, solders great. Thanks.

Verified Purchase Scott Brown on Oct 11, 2019 I found this helpful (0)

Recommend to a Friend

One Great Little Scope

5.0

I love this oscilloscope so much! Make my work so much easier. This replaced a dual trace B&K scope from the 80s. Don't know why I waited so long.

on Oct 11, 2019 I found this helpful (1)

Recommend to a Friend

Initial results positive

5.0

I've just used the FR-301 a bit after receiving it. It worked great on the single sided board I need to fix immediately. Solder was completely removed and part fell out of the board. Will report back when I've had more experience...

Initial use is fantastic on Sep 26, 2019 I found this helpful (0)

Recommend to a Friend

Excellent Product

5.0

Excellent Product

Verified Purchase Anonymous on Sep 12, 2019 I found this helpful (1)

Recommend to a Friend

Excellent value

5.0

With all of the options unlocked, this is an amazing value.

John Lee on Aug 17, 2019 I found this helpful (0)

Recommend to a Friend

Excellent value

5.0

I have made careful measurements of this device. I continues to impress me. Rock solid

John Lee on Aug 17, 2019 I found this helpful (0)

Recommend to a Friend

Great Soldering Station

5.0

Had held off buying one of these for a while, but I finally decided to take the plunge. Tequipment had the absolute best price I could find, especially as an educator. Soldering station is well built and works great. Only wish I had more soldering projects to work on!

Verified Purchase Andy on Aug 15, 2019 I found this helpful (1)

Recommend to a Friend

Amazing Value

5.0

This scope is an amazing value. The SCPI commands are robust to control every aspect of the scope via IP and do screen grabs from the device over the network. This also allows for the scope to be used as a remote acquisition device to get any of the numerous measurements remotely via IP. - Endless possibilities with it remote - as well as how well it works on the bench by pushing the buttons. HIGHLY recommend this instrument for all levels of skill, will impress even advanced users familiar with the much more expensive scopes.

Verified Purchase John Detrick on Aug 12, 2019 I found this helpful (0)

Recommend to a Friend

I like this iron

5.0

My first digital soldering station with the Preset mode. I need to figure this out as the factory settings seemed to be working fine, but I touched one of the two front panel control buttons and it was off to the races / instant 899°F. Nice compact Digital Soldering Station - My first jump over to Hakko - and I am pleased as punch. The iron fits well in my hand - cools down so so when I need to change a tip, it seems that a 10mm wrench does the trick. Overall I am very pleased - The price is right and it came with a 1 lb Amerway - SN63 / PB37 Tin / Lead Solder. I even like the USA Blue/Yellow Colorway.

Verified Purchase Jonathan on Aug 06, 2019 I found this helpful (3)

Recommend to a Friend

Great Tool......

5.0

All the hype is true, if you do more than just a little soldering this is the bomb. Spend a little extra and go for it, you won't regret it. So happy with my purchase.

Verified Purchase Jim Doherty Jr on Jul 29, 2019 I found this helpful (0)

Recommend to a Friend

Quality product

5.0

This is an amazing soldering station. I did a lot of research before buying this product. It's about a hundred USD so it's not the cheapest soldering station out there. However, this product is really well built - I'm probably going to get a new station for features before this stops working, and replacement parts are really easy to find. Hakko also produces literally every tip type you may need!

Verified Purchase Devyash Lodha on Jul 19, 2019 I found this helpful (2)

Recommend to a Friend

nozzle size

3.0

FR301 is a great tools for de soldering, I wish they have a much bigger size of nozzle use for IGBT power pack terminals and for relay terminals.

Verified Purchase Noel Declaro on Jul 15, 2019 I found this helpful (0)

Recommend to a Friend

HakkoFR 301

5.0

Recently while in NYC decided to buy a Hakko FR301 replaciny my accidentally broken FR300, i am not going to say much but this Hakko devices really do well all you expect them to do.They are a handy affordable charm and for sure will save you lot of effort and PCBs.5??????????

Verified Purchase nelson baez on Jul 10, 2019 I found this helpful (0)

Recommend to a Friend

Best scope for the price

5.0

This is the best entry level scope!

Verified Purchase Christian Llanes on Jul 05, 2019 I found this helpful (0)

Recommend to a Friend

Great scope

5.0

This is by far the best entry level scope for hobbyists.

Christian on Jul 04, 2019 I found this helpful (0)

Recommend to a Friend

Good Iron

5.0

So far this is a very good soldering station. Easy to use and heats up quickly. Thanks; David

Verified Purchase David on Jul 04, 2019 I found this helpful (0)

Recommend to a Friend

WELL WORTH THE PRICE

5.0

I f your wondering if you can afford this the answer is YES.Works well, de-solders quickly. Components fall out depending on the woirk. Makes having to de solder anything a fun project. Clean up is straight forward. It has worked well for me. Your mileage may vary.

1966 on Jun 28, 2019 I found this helpful (0)

Recommend to a Friend

Solid

5.0

I'm very pleased with this supply. Works well, is accurate and easy to use. The fan is very audible, but I don't find it bothersome or even noticeable except when turning it on or off.

Verified Purchase Scott Case on Jun 20, 2019 I found this helpful (0)

Recommend to a Friend

Well worth the price.

5.0

As an amateur who is getting into board repair and retro gaming reproduction, this desoldering gun makes crazy fast work of stripping down PCBs. It's well worth the price in terms of how long it would take to strip a board of its components with regular methods.

Verified Purchase Jose Guerra on Jun 08, 2019 I found this helpful (1)

Recommend to a Friend

We have 4 of these and they are great!

5.0

Just bought our 4th one for the lab, great price and performance. A must have.

Verified Purchase Matthew Schinault on Jun 04, 2019 I found this helpful (0)

Recommend to a Friend

Great Supply

5.0

Plenty of features, does the job well with no problems. Good price point.

Verified Purchase Matthew Schinault on Jun 04, 2019 I found this helpful (0)

Recommend to a Friend

No complaints

5.0

Well packaged and quickly shipped. Used all the basic functionality of the scope so far, and it beats my experience with previous analog scopes. Pros: small size (less bench space), feature packed, 4 channels. Cons: a bit loud (might try to modify the fan once out of warranty), long boot time.

Verified Purchase Anonymous on Jun 03, 2019 I found this helpful (0)

Recommend to a Friend

Should have bought a long time ago!

5.0

Excellent tool! I always hated desoldering components because of the chance of overheating parts and pcb traces. This tool works like magic.

Verified Purchase Andrea Lini on May 26, 2019 I found this helpful (1)

Recommend to a Friend

Arrived quickly and we got started right in

5.0

It came very quickly and we started right in, trying the suggestions in the manual. Very happy w the choice. CA

Caffel on May 17, 2019 I found this helpful (0)

Recommend to a Friend

Great Addition the Lab Bench

4.0

This unit has replaced a different lab supply that had issues with changing/losing voltage settings which was very unnerving. The DP832 has great options for setting and saving configurations and so far it was worked very consistently. It takes a bit of effort to navigate those functions but there is a lot of flexibility. Physically the unit is quite long but workable. The fan noise is louder than I would like but not whiny like other test equipment that I have so it's not as annoying. Would get 5 stars if the fan was quieter. Very happy with this item.

Verified Purchase Duncan MacGregor on May 16, 2019 I found this helpful (2)

Recommend to a Friend

One couldn't ask for more..well maybe

5.0

Great instrument for the price. Factory installed upgrades a plussss. Easily installed the last 2. Coming from an analog Tek 465, it does have an adjustment & learning curve and I am still working on that. TE ordering & shipping was easy and fast. The only comment is that I wouldn't consider the "Engineers" real engineers. They are sales people with some technical knowledge.

Anonymous on May 12, 2019 I found this helpful (1)

Recommend to a Friend

Good enough to buy two

5.0

I was happy enough with this that I eventually bought two of them in total. It's just a solid lab power supply with three programmable outputs. Not a lot of excitement, which is what you'd want in a power supply. The user interface is decent although many complain about the encoder wheel to set values. It could definitely be more streamlined, but you get used to it. The only part of the UI that I found almost unusable was the timer functionality, where you can set it to step through different voltage and current limits. It may have improved in later firmware revisions, but it was very unclear where the sequence was supposed to stop, and using the prefab templates seemed to not work at all. However, most people will probably never use this functionality, or will automate it externally with LXI etc.

Verified Purchase Michael H. on Apr 29, 2019 I found this helpful (1)

Recommend to a Friend

Good standard iron

5.0

A good "standard purchase" iron, this one has been serving me well for quite a while, as well as a great many others. My only complaint is the user interface and how easy miscalibration is, which caused me to erroneously set the calibration temperature versus the set point temperature on more than one occasion. That in turn caused me to buy the Hakko FG100-2 tip thermometer to recalibrate the station, which is more than double the cost of the station itself! (But worth it, in any case.) If I had to do it again though I would probably buy the Pace ADS200; not because there is anything wrong with the Hakko station, which is really pretty good, but just because the Pace is that much better without being unreasonably priced like some of the JBC/Metcal equipment.

Verified Purchase Michael H. on Apr 29, 2019 I found this helpful (1)

Recommend to a Friend

Rigol DP832 Power Supply

5.0

This power supply most positively a welcome addition to any laboratory. It is precise and easy to use. I have bought about 35 of these already. Very well made.

Tabrizi on Apr 21, 2019 I found this helpful (1)

Recommend to a Friend

Hakko FR-301 Desoldering Tool

5.0

Very good quality, and works great. Fits my business perfectly. Was also impressed with how quickly it arrived! Highly recommend this device!

truefret on Apr 18, 2019 I found this helpful (1)

Recommend to a Friend

Perfect affordable soldering station

5.0

Ideal for 99% of my soldering needs. A bit pricey, but it's built properly and won't burst into flames like a typical low-dollar Chinese unit. Cheap clone tips work great, too.

Verified Purchase Anonymous on Apr 15, 2019 I found this helpful (1)

Recommend to a Friend

Bargain for the price

5.0

Well built unit, tons of features, and a pricetag that's surprisingly reasonable for what you're getting. This isn't a $5000 scope, but it's well above it's price class. Everything arrived well packaged and on time.

Verified Purchase Robert on Apr 04, 2019 I found this helpful (0)

Recommend to a Friend

Super Value!

5.0

Came from factory with all options permanently enabled except for 100MHz. A software update fixed a "2 detents to change" encoder issue (in general, mechanical encoders are notoriously difficult to integrate, and have really bad wear issues). Text on the screen is a bit small for my old eyes, fan is a bit loud, the FFT could be more responsive and useful, the control panel and screen are rather busy, but beyond that I don't have anything negative to report. Came with four 1x/10x probes that work fine, boxed well for shipment. For what it is and can do it's a tremendous bargain!

dewster on Mar 27, 2019 I found this helpful (1)

Recommend to a Friend

Great shipping great product

5.0

HAKKO FX888D-23BY DIGITAL SOLDERING STATION, is an awesome soldering station, and TEquipment was great to work with and shipped quickly.

Verified Purchase Kevin Allred on Mar 26, 2019 I found this helpful (0)

Recommend to a Friend

Rigol DS1054Z Oscilloscope

5.0

I love the look and feel of the product. It is reasonably easy to use even for someone with very little experience using such devices. I don't think that it is possible to beat it for the price.

Verified Purchase NormG on Mar 20, 2019 I found this helpful (0)

Recommend to a Friend

Excellnent value

5.0

I purchased this unit last week and after using it I was very impressed. Iron heats up quickly and adjustable temp works well! Tips last for a long time as well!

Verified Purchase Robert M. Gaw on Mar 19, 2019 I found this helpful (0)

Recommend to a Friend

More than an entry level scope

5.0

Fabulous, I am delighted. This is perfect for my use. As a recording studio owner 50Mhz (or 100Mhz with upgrades, wink, wink) is well within my needs, but great to have. Great options, nicely built, and easy to use. I like it, worth the price of admission.

Verified Purchase Mark A Reynolds on Mar 15, 2019 I found this helpful (0)

Recommend to a Friend

This thing is a beast

5.0

This is perfect for my use. As a recording studio owner it's is well beyond my needs, but great to have. Great options, nicely built, and easy to use. I like it, worth the price of admission.

Verified Purchase Mark A Reynolds on Mar 15, 2019 I found this helpful (1)

Recommend to a Friend

A must have tool

5.0

I used to hate desoldering so bad and this tool makes really makes it easy. Very easy to use and heats up quick. The pump removes all solder with no problem at all. Easy to take apart and clean. I can kick myself for not buying this a long time ago.

Verified Purchase Bill on Mar 10, 2019 I found this helpful (1)

Recommend to a Friend

HAKKO FR-301 DESOLDERING TOOL

5.0

I just wish I had this desoldering tool years ago, it works great. I have used it on through hole circuit boards and also de-soldering hand wired old tube radio circuits. I can't believe how clean it will leave a tube socket terminal that you can then just untwist the wires.

Verified Purchase Richard Nagel on Mar 09, 2019 I found this helpful (1)

Recommend to a Friend

DS1054Z Star Performer

5.0

As a hobbyist, I don't have an unlimited budget for quality hardware. The DS1054Z is an exceptionally great value for cost to performance and I really appreciate that. You have a company that stands behind it's product, with the technical prowess to provide help when those times crop up. I have been extremely satisfied with the product's performance and the reliability will be determined in the future, but with this scope being a top seller for the last 5 years, that speaks for itself. You can add my endorsement to the growing list of people that have found this unit to far exceed expectations and put me down as one happy satisfied customer.

Verified Purchase Tecstar1 on Mar 08, 2019 I found this helpful (0)

Recommend to a Friend

DP832

5.0

I am not your typical professional writing a review, I am purely a hobbyist that appreciates quality hardware that is going to last. I only want to make a purchase once and be able to rely on your equipment performing it's intended operation. The DP832 provides flexibility on designing home circuits with varying requirements for power. I typically have 3 or more circuits in process at one time, and having 3 separate outputs makes it simple to select prior setups. The Rigol DP832 has exceeded my requirements, and I am sure will be a part of my system for years to come. Great value in my opinion.

Verified Purchase Tecstar1 on Mar 08, 2019 I found this helpful (2)

Recommend to a Friend

Works great

5.0

Desoldering is the job I dread most. This tool makes desoldering easy.

Verified Purchase T. Gatlin on Mar 05, 2019 I found this helpful (1)

Recommend to a Friend

Hakko FX888

5.0

Hakko iron is well made Solid and heats to temp quickly. . Delivery was prompt and pricing excellent. Using for small jobs on vintage stereo equipment. Order from Tequipment-the product is the real deal and not some knock off.

Verified Purchase Anonymous on Mar 04, 2019 I found this helpful (0)

Recommend to a Friend

DP832 Lab Power Supply

5.0

My over all impression is that this is an excellent power supply for the cost. I found that even though I don't need glasses to work on my computer, the small screen requires a magnifying glass or a set of reading glasses. It needs a handle that can be used to place the case at an angle on my bench to make it easier to read. I also wish that it came with a User Manual, instead of having to download from the internet. The unit performs well and looks good and I liked the software upgrade features. I would buy it again.

Verified Purchase Larry W Millholland Sr on Feb 27, 2019 I found this helpful (1)

Recommend to a Friend

Outstanding Value

5.0

It's not a LeCroy, but this is an outstanding value in a scope! At the current price, especially with the included software bundle, there is probably nothing else on the market which can compare. I'm very happy to have it on my hobby bench. The menu structure is a little quirky in places, but easy to learn. The front panel is layout is pretty good. The response time is fine for hobby work but would be a little slow if I were in a big hurry on a commercial bench. The included manual is really basic, so if you have questions be prepared to hunt around online for answers. My only real complaint is the somewhat touchy selector knob. It's too easy to overshoot the desired setting, but it's just a minor annoyance.

Bob on Feb 25, 2019 I found this helpful (0)

Recommend to a Friend

Great beginner scope.

5.0

I wanted a beginner scope to help troubleshoot and work on old 8 bit computers and some ham radio projects. I've never used a scope before and had this doing what I needed in 5 minutes. The only thing I would say is a negative are some of the font sizes. It can be tough to read at times.

Verified Purchase PaulD on Feb 24, 2019 I found this helpful (0)

Recommend to a Friend

RIGOL DS1054Z DIGITAL OSCILLOSCOPE REVIEW

5.0

Incredible value for money. Where do I start? Huge range of trigger options, large number of math and statistics measurements available. And a hardware frequency counter. And much, much more. Did I mention that you're getting a 4 channel scope with all the above features for $375?

Verified Purchase James Spottiswoode on Feb 22, 2019 I found this helpful (0)

Recommend to a Friend

New and improved? Ayuh

5.0

I have been the proud owner of the Hakko 808 for several years. It was time to get this new design. I am happy so far, an easy five stars.

Verified Purchase Michael Higgins on Feb 19, 2019 I found this helpful (1)

Recommend to a Friend

Great value soldering station

5.0

The Hakko FX888D soldering station is a great value for money. For around $100, it heats up faster, and does a better job than a more expensive Weller it replaced. The built quality is excellent as well. Good variety of low priced tips are available for it. A definite buy.

Verified Purchase keith virge on Feb 18, 2019 I found this helpful (1)

Recommend to a Friend

Awesome Power Supply

5.0

This piece of equipment is vital to all the development and testing that I do. With the isolated power I can produce positive and negative sources along with 3.3 or 5 volts for microcontroller applications. Is a little pricey for the average hobbyist but well worth the investment. (and i would but this again in a heartbeat)

Verified Purchase John Wilson on Feb 08, 2019 I found this helpful (1)

Recommend to a Friend

I2C decode

5.0

This is a comprehensive scope with great advanced features such as I2C that i use all the time in development and interfacing to other products. This is not too hard to setup and operate. I like this scope for the money you cannot beat it. The only drawback is that the decode features are software based so that you have to be careful when viewing data.

Verified Purchase John Wilson on Feb 08, 2019 I found this helpful (1)

Recommend to a Friend

Amazing soldering station

5.0

Great product, heats quickly, holds the heat well even when soldering thick PCB. My first major purchase of a more professional oriented soldering station, and I am greatly impressed. I'll never go back to local hardware store junk irons again. Been eyeballing a Hakko station for years and glad I finally made the purchase. Ill highly recommend this station to anyone who is looking to invest in a high quality soldering station.

Verified Purchase James Gosnell on Feb 07, 2019 I found this helpful (0)

Recommend to a Friend

Great tool

5.0

I wish I would have bought a desoldering tool like this 10 years ago. Solder wick is such a pain, and those manual suction tools suck -- not in a good way. I removed a dozen components from a board with ease using this tool in like two minutes. It's almost magic.

Verified Purchase Jason Baker on Feb 05, 2019 I found this helpful (2)

Recommend to a Friend

FR-301 - excellent tool w/one easy-to-fix issue

5.0

I used my new Hakko FR-301 desoldering gun for the first time yesterday. I was very pleased with the performance of the gun. It is comfortable to use and does a really good job of cleaning out via holes, leaving through-hole component leads free to drop out. To save their tips from oxidizing and making them difficult to wet with solder, I typically turn irons off while doing other operations until I am ready to use them again. The FR-301 comes up to temperature quickly which facilitates this. The only complaint I have with the unit is that the power-on indicator light is on the wrong side of the handle. The indicator on the FR-301 is not visible when the gun is parked in its stand. It would be better to have the indicator visible from any vantage point at any angle, or at the very least somewhere on the back, like perhaps on or around the power switch itself. As it is now, you have to remove the unit from the stand and turn it around to veiw the indicator. It could be brighter too. Presently, it is rather dim and difficult to see. The FR-301 is, otherwise, an excellent tool. You may want to pass this information on to the manufacturer. Thanx, G. Knoedl

Verified Purchase George Knoedl on Jan 31, 2019 I found this helpful (4)

Recommend to a Friend

Amazing

5.0

I love this little thing. It's pretty amazing to unsolder headers and have them just come loose. It's a game changer!

Verified Purchase Anonymous on Jan 29, 2019 I found this helpful (1)

Recommend to a Friend

Very well-built, small scope

4.0

This is a great and widely recommended entry-level quad channel scope. It was smaller than I anticipated, which for me is a very good thing. The screen and overall build quality are very good, all controls are intuitive if you have ever used as scope before. Recommended.

Verified Purchase codex0 on Jan 21, 2019 I found this helpful (0)

Recommend to a Friend

Excelent Power supply with built in turbine

4.0

I got this power supply over a year ago and it is a solid performer on my workbench. It's used for hobby applications and I never had issues with it. I mainly use it from the front panel but tested some simple setups in LabVIEW in combination with the DM3068 DMM and a DS2302A scope...no issues. It took a little while to get used to it but now I really like the user interface. The huge complaint is the build in fighter jet turbine. I thought the DS2302A scope is loud, after I installed this power supply I learned the scope is whisper silent. I don't know how you can design bench equipment that is designed to sit in front of the user which is so noisy. Yes it's not a pricy power supply but the efforts to minimize the noise aren't too pricy either. My unit is out of warranty now and I will definitely look into alternative fans that reduce the nose without loosing air flow. Other than the noise complaint this is a very nice power supply for the price.

AC7FD on Jan 21, 2019 I found this helpful (4)

Recommend to a Friend

Great for the price

5.0

Heats up really fast. Easy to control and lots of different size tips to use.

Verified Purchase Kenneth Veznaian on Jan 20, 2019 I found this helpful (0)

Recommend to a Friend

A well-made tool !

5.0

After struggling along with an older soldering station, the HAKKO FX888 soldering station and its quick heat recovery time has made work a breeze! ps... don't forget to order a variety of tips.

Verified Purchase Bruce Manning on Jan 17, 2019 I found this helpful (0)

Recommend to a Friend

A wonderful addition to our bench!

5.0

The HAKKO FR-301 was recommended by a seasoned professional tech. This rugged instrument is saving valuable bench time bringing back to life our vintage arcade machines.

Verified Purchase Bruce Manning on Jan 17, 2019 I found this helpful (1)

Recommend to a Friend

Very Nice Instrument!

5.0

The Hakko soldering station was recommended by a seasoned tech. I am enjoying the quick heat-up and recovery. A solidly built tool. Just a reminder... be sure to order a variety of tips for your projects.

Verified Purchase Bruce Manning on Jan 15, 2019 I found this helpful (0)

Recommend to a Friend

DS1054Z

5.0

I just received my 1054Z. I was very pleased with the speed of shipping and the way the unit was packaged. Working with TEquipment was an extremely pleasant experience. The folks there are knowledgeable and polite. The scope appears to be well built and functioned properly right out of the box. I am very pleased with the entire experience!

Verified Purchase tl on Jan 15, 2019 I found this helpful (0)

Recommend to a Friend

Hakko FR-301

5.0

This Desolder Tool was highly recommended by a seasoned circuit pro. I was pleased with its ruggedness and ease of use. I would suggest purchasing at least 4 additional tips in order to be ready for any project.

Verified Purchase Bruce Manning on Jan 14, 2019 I found this helpful (1)

Recommend to a Friend

Rigol DS1054Z Oscope

5.0

This Oscope was purchased as a gift for a friend who repairs and refurbishes amplifiers and speaker cabinets for electronic instruments. His complaint before having the scope was he couldn't see what the electric was doing. Now he reports he's on cloud nine with this scope. Turned out to be a great gift to a good friend,

Frank on Jan 12, 2019 I found this helpful (0)

Recommend to a Friend

Great Value for EE student

5.0

I'm an electrical engineering student and bought this scope to take my measurements up a notch. I'm extremely impressed at all the functionality in this scope for the amazing price. This is an awesome learning tool and hope to keep gaining new knowledge with it for years to come.

Verified Purchase Joshua Vandermeer on Dec 25, 2018 I found this helpful (0)

Recommend to a Friend

get it, won't regret it

5.0

Great scope, excellent price, and comes with ALL software features enabled, thanks to Rigol / TEquipment. This vendor is the best! Highly recommended.

Verified Purchase gershon on Dec 21, 2018 I found this helpful (0)

Recommend to a Friend

great value, well-built supply

5.0

The DP832 is a great value. There's really nothing in its class at its price. Can't comment on the long term yet, as our model is new, but it feels solid. I was concerned about the loud fan comments, but I haven't found the DP832 unusually loud, particularly in a lab environment. I might consider a DIY fan replacement if I were in a quiet office. It would be nice if Rigol enabled all the features in the hardware, instead of selling license keys separately. That seems to be their trade-off for lowering the barrier to entry.

Verified Purchase gershon on Dec 21, 2018 I found this helpful (1)

Recommend to a Friend

Excellent!

5.0

This desoldering iron is great! Make a job that took a few minutes take seconds now! No issues with it getting stuck-up with solder or anything.

Verified Purchase Beth N on Dec 19, 2018 I found this helpful (1)

Recommend to a Friend

DS1054Z delivers, powerful scope, great value

5.0

The DS1054Z is a much better scope than I expected given the price. It came with 4 probes and all the software options already unlocked. The shipping was fast and easy. I would definitely recommend it for beginners and advanced users but think someone who wants to use it as a logic or protocol analyzer should go with a stand alone solution (like the saleae logic pro 16 or something similar).

Verified Purchase Richard on Dec 07, 2018 I found this helpful (0)

Recommend to a Friend

I am super pleased with this DSO

5.0

The scope build quality and operation are excellent and hard to distinguish from our higher end scopes. Many of the knobs also press, for example to center the vertical at zero or change to zoom mode. In fact many features I find to be easier. This is a very nice oscilloscope. It is very affordable and has great features. I was so satisfied with the first one I bought, that I went back to buy another one without hesitation. I think that this instrument in its segment probably has the best cost-benefit ratio in the market.

Verified Purchase Eric Dahlgren /R.Iglesias on Nov 28, 2018 I found this helpful (0)

Recommend to a Friend

Highly recommended

5.0

I bought a number of these. Excellent buy for the money. No real time clock, but a non issue for me. Highly recommended!!

Verified Purchase derf44 on Nov 23, 2018 I found this helpful (0)

Recommend to a Friend

FR-301

5.0

I used a solder sucker one time and new that it was something I did not want to continue. Almost every review I read the person said they should have bought a de-soldering tool years ago. I took that advice and am happy I did. This thing works like a champ. I have little to compare it to but it works great and makes life much easy.

Raven on Nov 22, 2018 I found this helpful (0)

Recommend to a Friend

Best bang for buck

5.0

This is my second DS1054Z: purchased this one strictly for personal work usage. Can't beat the price/value.

Verified Purchase Jamie on Nov 20, 2018 I found this helpful (0)

Recommend to a Friend

Excellent !!!!

5.0

All it was touted to be and more, outstanding design and superior performance. Just regret not having purchased this outstanding soldering tool sooner !!!! Great VALUE !!!!

Robert Chartier on Nov 06, 2018 I found this helpful (1)

Recommend to a Friend

Fantastic value!

5.0

Has more features and capability than I ever imagined at this price point, or even much higher. It has its limitations, of course, but most of the complaints you may see (input noise, frequency measurement inaccuracy, etc) are not faults, but characteristic of this type of instrument. It does what it should, and very well.

Verified Purchase Brian Dunham on Oct 30, 2018 I found this helpful (1)

Recommend to a Friend

Works well

5.0

While 50 MHz has its limits in the digital you can still get some basic debugging done. This scope works as well (and sometimes better) than the older analog CRT scopes ire[aces. The measurement capabilities make things go faster. Well worth the price. When I need a higher BW scope or a large logic analyzer renting them still works well.

Verified Purchase VirgniiaGuy on Oct 24, 2018 I found this helpful (0)

Recommend to a Friend

Excellent

5.0

High quality product, I really recommend this product.

Verified Purchase José Luis Herrera Corrales 112 on Oct 23, 2018 I found this helpful (1)

Recommend to a Friend

Awesome solder station

5.0

I thought I was horrible at soldering and decided to give it one more go. Did a ton of research and landed on this. Turns out I dont suck at soldering, my old iron did... This gets hot quick and the holder/cleaner is a nice bonus. Menu is a bit wonky but I dont have to change temps to often

Verified Purchase Ryan Conroy on Oct 19, 2018 I found this helpful (0)

Recommend to a Friend

Great tool for the money!

5.0

I just retired so now electronics is my hobby and not a profession. I'm pretty old school so I'm comparing this scope to my trusty Tektronix 465 100 Mhz scope. Happily, the Rigol is very easy to use right out of the box and all of the common essential functions are still accessed through knobs and buttons. There are a bunch of menu driven options - not my favorite way to set up gear - but even those are easy to navigate. I've heard complaints about all modern digital scopes crashing (anything that's software driven will crash after all) but I haven't experienced any problems with mine. I sure don't need all 4 channels all the time but how can you go wrong at this price? Most of my applications are audio (I build analog synthesizers) so 50Mhz is more than enough bandwidth for what I do. This is my third purchase from TEquipment and as always it has been a great experience. If you only need 50Mhz of bandwidth, you can't go wrong with this scope.

heygtrgar on Oct 14, 2018 I found this helpful (2)

Recommend to a Friend

Easy to use, best repair tool ever

5.0

I wish I'd bought one of these years ago. Even if you only do occasional repair work, this is vastly superior to the two-handed iron and solder-sucker arrangement. Avoiding damage to even one circuit board pays for the tool.

Verified Purchase Brian Dunham on Oct 04, 2018 I found this helpful (1)

Recommend to a Friend

Perfect!

5.0

Don't hesitate. It performs its function perfectly. Follow the directions. The included tip is probably fine for most jobs.

Verified Purchase JFM on Sep 30, 2018 I found this helpful (1)

Recommend to a Friend

Hakko FR-301 - Great quality

5.0

Very well built. Heats up quickly and did a great job desoldering components from single and multi layer boards.

Verified Purchase Jeff Hecht on Sep 29, 2018 I found this helpful (1)

Recommend to a Friend

Works Great

5.0

I've been using solder wick and manual solder extracting devices for 40 years. I've been thinking about the Hakko FR-301 for several years wondering if I spent this much money would it be a tool or a toy. Just got it yesterday and it is definitely a tool that I hope to use for years ahead. Very happy with my purchase.

Charles G. on Sep 20, 2018 I found this helpful (3)

Recommend to a Friend

Rigol DS1054Z Digital Oscilloscope 50 Mhz DSO 4 Ch

5.0

I just received this oscilloscope about 2 weeks ago; I know that this just an entry level oscilloscope but it has a lot going for it and the price is great. I have some analog scopes but no digital. What I like the vertical and horizontal buttons on the side with lots of options. I have heard some say the screen is a little small. But compared to the size of the unit it a good size and I have to ware reading glasses. The screen is easy to read. Then there is a real nice save or print button. XY mode can have a split screen or with a push of a button YT mode for wave sine. Lots of measurements can be seen on the screen with just a push of a button. There is a lot more and the price you just can't beat it. I am currently troubleshooting a TV with it and found 5 defective electrolytic capacitors with this DS1054Z oscilloscope. I do not have a lot of money nor the need a high price oscilloscope. This one is just great for me.

Verified Purchase Stanley Johnson on Sep 12, 2018 I found this helpful (0)

Recommend to a Friend

Rigol DS1054Z Digital Oscilloscope 50 Mhz DSO 4 Ch

5.0

If anyone is interested in getting this Rigol DS1054Z Digital Oscilloscope 50 Mhz DSO 4 Channels don't hesitate to buy it directly from Testequipment.net. Not only will you get a quality product but it will also include some very helpful and useful software to install on the Rigol DS1054Z Digital Scope which will unlock a multitude of features. This package comes free with purchase through Testequipment.net which retail value of $$$ and only available here. Do not purchase through A****n/ E**y, etc...since you will only receive the Rigol Oscilloscope and not the bonus software upgrades $$$. I'm glad I did my homework and got it here. I have been wanting an Oscilloscope with these features and the price for sometime, and well it's a steal considering all the features it comes with. You won't regret it. Thank You Testequipment.net for help making my purchase fast & pleasant.

J.J. on Sep 06, 2018 I found this helpful (0)

Recommend to a Friend

Great tool

5.0

One of the most important tools a hobbyist should have. In my opinion, the form factor is the best, as it fits even on a small bench.

Verified Purchase JAIRO ALBERTO ROJAS BOYACA on Aug 18, 2018 I found this helpful (0)

Recommend to a Friend

Useful Tool

5.0

This has been a quite useful tool for me as a hobbyist. Now I understand better some concepts since I´m able to see them in real time.

Verified Purchase JAIRO ALBERTO ROJAS BOYACA on Aug 18, 2018 I found this helpful (0)

Recommend to a Friend

Excellent Instrument

5.0

The DS1054Z has been excellent so far in the one month I've had it. The oscilloscope looks great, the keys feel great, it has a nice big display, and the scope reads beautifully. I haven't had any issues. TEquipment was great with shipping and providing the necessary information.

Verified Purchase Michael Dermksian on Aug 16, 2018 I found this helpful (0)

Recommend to a Friend

As advertised

5.0

Works out of the box. Exactly as advertised. Pre-configured with all the free extras.

Verified Purchase Michael Lamb on Aug 14, 2018 I found this helpful (0)

Recommend to a Friend

Rigol DS1054Z

5.0

Great 4 channel scope for most hobbyist needs for a reasonable price.

Verified Purchase Anonymous on Aug 14, 2018 I found this helpful (0)

Recommend to a Friend

FR-301

5.0

Heats fast, recovers fast, sufficient vacuum. Nozzles interchange quickly and easily. The tool is well made and operates simply. A good value

Brett on Aug 13, 2018 I found this helpful (2)

Recommend to a Friend

So Far, Awesome

5.0

So far, this thing is awesome. Granted, it has a lot more features than I'll likely even need, but who knows. This is my first scope, and so far it's been very easy and intuitive to get to know. Setup was easy, and installing the free "upgrades" was no big deal either. I'm looking forward to this making my life a lot easier working on tube amps and other audio equipment.

Verified Purchase KungFuJosh on Aug 09, 2018 I found this helpful (1)

Recommend to a Friend

Great scope at an affordable price

5.0

Great first time experience ordering from TEquipment - will definitely order again as my test equipment needs grow. This scope is a good addition to my "maker" shop - looking forward to many years of use.

Verified Purchase Anonymous on Aug 03, 2018 I found this helpful (0)

Recommend to a Friend

Rigol DS1054Z

5.0

In this store this oscilloscope has reasonable cost.The taxes and shipping included, very very great service. My oscilloscope arrived to Mexico at eight days. I will buy with them one more time! I saw many others devices that I would like to buy!

Verified Purchase Hector Ramos on Aug 02, 2018 I found this helpful (0)

Recommend to a Friend

Solid Power Suppply

4.0

This is a very solid and nice PS. I was a bit surprised how heavy and large it actually is. There is one complain which is the loud fan. There are some mods out there to replace the fan with a quiet one but it's not as straight forward as you might think since you have to make sure to match the current of the original fan and of cause you will void the warranty. So, please Rigol spend $8 for a quiet fan - well the fan of my Rigol DS1052 is even louder ;-). Anyway, I highly recommend to watch the EEVblog reviews on the PS as it gives you a lot of great info.

Verified Purchase larry104 on Aug 01, 2018 I found this helpful (4)

Recommend to a Friend

Great Company

5.0

This is our second purchase. TEquipment.NET is great to do business with, fast order processing and fast shipment. No problems! Will order from them again.

David on Jul 27, 2018 I found this helpful (0)

Recommend to a Friend

Really nice scope

5.0

For the money you can't get better. Definitely worth it, especially for the hobbyist.

Verified Purchase Fred Foscalina on Jul 27, 2018 I found this helpful (0)

Recommend to a Friend

Works, but is a little off

4.0