Tequipment
An InterWorld Highway, LLC Company
Call Us 1.877.571.7901
Pico 2204A PicoScope 2 channel + AWG, 10MHz
 
 
 
 
 

Rigol DS1054Z-Kit1 Digital Oscilloscopes - Bandwidth: 50 Mhz, Channels: 4, Sampling Rate: 1 GS/S

Rigol DS1054Z Kit1
         
5 of 5
50 MHz Digital Oscilloscope with 4 ch, 12 Mpt memory, 1 GSa/sec sampling rate, accessory kit and 50 ohm impedance adapter

Click to Listen - Top Features

Features

  • The Number 1 Selling Oscilloscope of 2015 with our top 2 selling accessories at a discounted pricing
  • Adds CT4042 oscilloscope Accessory Kit and a rigol 50 Ohm impedance adapter for oscilloscopes or generators. Get the most out of your scope with this advanced cable and adapter accessory kit.
  • PLUS Kit1 contains:
  • CT2411 Coax Adapter - (f-m-f) Tee
  • CT2939 BNC(f) Adapter - 4mm BPlugs, Black
  • CT2942-120 BNC (m) Cable Assembly - RG-58C/U, 120cm, Blk
  • CT2944 BNC 50ohm Feed-Thru Term - (m-f) 2W, 1%
  • CT3230-100 Cable, BNC - MiniP Clips - 50ohm, 100cm, Black
  • Rigol ADAPTOR-50-OHM 50 Ohm impedance adapter for oscilloscopes or generators
  • 4 Channels, 50 MHz Bandwidth
  • UltraVision: Deeper memory 12 Mpts upgradable to 24 Mpts via a software key
  • ( this is not a typo.  This scope has 12 Megs of Memory standard! )
  • Up to 30,000 wfms/s Waveform capture rate
  • HUGE 7'' screen  WVGA(800X480) TFT
  • USB HOST, USB DEVICE, LAN, Aux (TrigOut /PassFail)
  • Incredible display with multi-Level intensity grading display
  • Realtime  waveform  Record,Replay, function (Opt.)
  • FFT function standard
  • A variety of Trigger Functions
  • Optional Serial Bus Triggering and Decoding functions(RS232,I2C,SPI)  These are software keys
  • Automatic Measurements with Statistics
  • This scope is truly amazing for the price.  Deep memory, beautiful screen, 4 channels, free software, USB host interface, standard usb interface on the back, LAN/Ethernet standard, Aux (TrigOut /PassFail)
Loading Prices
List Price: $483.00
Sale: $465.00
  + Free shipping over $99

Loading Callouts
AUTO COMPARE   Request a Quote
Loading Series Compare

Compare Products in this Series

Product Name Bandwidth Channels Sampling Rate Availability Price  
DS1054Z Kit1
DS1054Z Kit1
50 MHz Digital Oscilloscope with 4 ch, 12 Mpt memory, 1 GSa/sec...
50 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1074Z-S
DS1074Z-S
70 MHz Digital Oscilloscope with 4 channels and 25 MHz 2 channel...
70 Mhz 4 1 GS/S
Clearance
22% OFF!
3 remain
Edu Price Standard Price Gov't Price
DS1104Z-S
DS1104Z-S
100 MHz Digital Oscilloscope with 4 channels and 25 MHz 2 channel...
100 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1074Z
DS1074Z
70 MHz Digital Oscilloscope with 4 channels plus 12 Mpt memory and 1...
70 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1104Z
DS1104Z
100 MHz Digital Oscilloscope with 4 channels plus 12 Mpt memory and 1...
100 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1054Z
DS1054Z
50 MHz Digital Oscilloscope with 4 channels plus 12 Mpt memory, 1 GS/s...
50 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1054z Kit2
DS1054z Kit2
50 MHz Digital Oscilloscope with 4 ch, 12 Mpt memory, 1 GSa/sec...
50 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1074Z Plus
DS1074Z Plus
70 MHz Digital Oscilloscope with 4 channels plus 12 Mpt memory (24 Mpt...
70 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1074Z-S Plus
DS1074Z-S Plus
70 MHz Digital Oscilloscope with 4 Channels and 16 Digital Channels +...
70 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1104Z Plus
DS1104Z Plus
100 MHz Digital Oscilloscope with 4 channels, 12 Mpts memory...
100 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1104Z-S Plus
DS1104Z-S Plus
100 MHz Digital Oscilloscope with 4 Channels, 25 MHz 2 channel Signal...
100 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price
DS1054Z-B
DS1054Z-B
50 MHz Digital Oscilloscope with 4 channels plus 12 Mpt memory, 1 GS/s...
50 Mhz 4 1 GS/S Availability
in stock!
Edu Price Standard Price Gov't Price

Product Information

Rigol DS1054Z-Kit1

 
 
 

Best Selling Oscilloscope

Find out with the DS1054Z-Kit1 is one of the top selling oscilloscopes in the WORLD since its release in September 2014. Read the reviews! Let our customers tell you what they think of this unit. Schools love them, companies love them, students and home hobbyist love the DS1054Z. Backed by a 30 day money back guarantee you cannot go wrong with this unit.

DS1054Z-Kit1 Features

  • 50 MHz Analog Bandwidth
  • Total of 4 Analog Channels
  • Maximum Waveform Capture Rate of up to 30,000 wfms/s
  • Includes 4 RP2200 150 MHz Passive HighZ Probes
  • KIT includes: Coax Adapter, BNC(f) Adapter, BNC (m) Cable Assembly, BNC 50ohm Feed-Thru & BNC MiniP Clips
  • Low noise floor
  • USB Host for Thumb Drive
  • Large 7" Display
  • 12 Mpts of Memory - upgradeable to 24
 
 

Customer Feedback

"I have used the scope for basic measurements so far, mostly audio signals and comparisons of such signals. It works well and the construction is as good as that of expensive top-brand items. The packaging was adequate and protects the instrument well. RIGOL has tried hard to pass themselves as a decent company to buy equipment from and they have succeeded, at least with this scope. I have used lots of lab equipment for many years in college labs and this would fit perfectly in every lab, given its low price, specifications and support. Highly recommended for tight budgets and high expectations"

What is included in the kit?

This Kit1 version now comes with all of our TOP selling accessories for this unit so you can get the most out of this unit right out of the box. Customers have asked us to combine this into and kit and here it is. It's the best of the best for this scope. The Kit includes the following: Coax Adapter, BNC(f) Adapter, BNC (m) Cable Assembly, BNC 50ohm Feed-Thru & BNC MiniP Clips

Customer Submitted Image

Customer Submitted Image

UltraVision

Rigol's innovative UltraVision technology provides a deeper memory depth of 12Mpts standard and is upgradeable to 24 Mpts (with purchase of MEM-DS1000Z). The DS1054z also provides the ability to quickly focus in on certain piece of a recorded waveform.

UltraVision

×

Full Visibility

×

Full Visibility

The large 7" display of the DS1054z, with a resolution of 800 X 480 pixels makes it possible to view all channels on a single screen. This makes for better usability and more efficient analysis.

Ultra-fast Sampling Rate

Rigol has given the DS1000z series the ability to capture up to 30,000 waveform per second. This coupled with the 12 Mpts of memory and sampling rate of 1 GS/s makes this a great oscilloscope for nearly any application.

Ultra-fast Sampling Rate

×

Optional Waveform Recording

×

Optional Waveform Recording

Rigol has made recording waveforms an accessible option for all users with the simple purchase of the DS1000Z-REC software option. This allows users to go back and analyze previous data.

Multi-Level Intensity Graded Display

This feature provides users the ability to focus in and visually detect event frequency over time.

Multi-Level Intensity Graded Display

×

Advanced Triggering Options

×

Advanced Triggering Options

Adding to the flexibility of the DS1000Z line up, Rigol has added the option to purchase and advance triggering feature. This includes triggering options such RS232/URAT, I2C, SPI, Runt, Windows, Nth Edge, Delay, Time Out. This option can be purchased under product number AT-DS1000Z.

Serial Bus Analysis Options

By purchasing the SA-DS1000Z Serial Bus Analysis Option, users can examine, decode and view RS232/URAT, I2C, SPI.

Serial Bus Analysis Options

×

Advanced Signal Calculations

×

Advanced Signal Calculations

Rigol has integrated an advanced system of formulas designed to resolve complex signal calculations.

Mask Test Function

This test function allows user to test a signal on a pass or fail basis allowing for easy troubleshooting in many applications.

Mask Test Function

×

Automatic Measurement Parameters

×

Automatic Measurement Parameters

The DS1000Z series of oscilloscopes is capable of automatically measuring and recording within 5 set parameters. It will also produce a statistical analysis of each set parameter.

What's In The Box

  • Power Cord
  • USB Data Cable
  • 4 Passive Probes (150 MHz) RP2200
  • Quick Guide
  • Resource CD (User’s Guide and Application Software)
PLUS Kit1 contains:
  • CT2411 Coax Adapter - (f-m-f) Tee
  • CT2939 BNC(f) Adapter - 4mm BPlugs, Black
  • CT2942-120 BNC (m) Cable Assembly - RG-58C/U, 120cm, Blk
  • CT2944 BNC 50ohm Feed-Thru Term - (m-f) 2W, 1%
  • CT3230-100 Cable, BNC - MiniP Clips - 50ohm, 100cm, Black
  • Rigol ADAPTOR-50-OHM 50 Ohm impedance adapter for oscilloscopes or generators

Specifications

Image
Model DS1054Z DS1074Z DS1074Z-S DS1104Z DS1104Z-S
Analog Bandwidth 50 MHz 70 MHz 100MHz
Channels 4
Max. Sample rate 1GSa/s (Single-channel),  500MSa/s(Dual-channel), 250MSa/s(Fulll-channel)
Max. Memory Depth 12Mpts(std.), 24Mpts(option)
Max. Waveform Capture rate Up to 30,000 wfms/s
Real Time waveform Record,
Replay and Analysis function
Up to 60, 000 Frames(Opt.)
Std. Probes RP2200 150MHz BW Passive Probe:4 sets
Built in 2 Ch Source No No Yes No Yes

 

Sample
Sample Mode Real-time Sample
Real-time Sample Rate 1 GSa/s (single-channel)
500 MSa/s (dual-channel)
250 MSa/s (four-channel)
Peak Detect 4 ns
Averaging After both the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024.
High Resolution The highest resolution is 12 bit
Memory Depth Single-channel: Auto, 12k pts, 120k pts, 1.2M pts, 12M pts and 24M pts (option) are available
Dual-channel: Auto, 6k pts, 60k pts, 600k pts, 6M pts and 12M pts (option) are available
Four-channel: Auto, 3k pts, 30k pts, 300k pts, 3M pts and 6M pts (option) are available
Input
Number of Channels four-channel
Input Coupling DC, AC or GND
Input Impedance (1 MΩ±2%) || (13 pF±3 pF)
Probe
Attenuation
Coefficient
0.01X-1000X, 1-2-5 step
Maximum Input Voltage (1MΩ)  Maximum input voltage of the analog channel
CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 Vpk
With RP2200 10:1 probe: CAT II 300 Vrms
Horizontal
Time Base Scale 5 ns/div to 50 s/div
Time Base Accuracy [1] ≤ ± 25 ppm
Time Base Drift ≤ ± 5 ppm/Year
Delay Range Pre-trigger (negative delay): ≥1 screen width
Post-trigger (positive delay): 1 s to 100,000 s
Time Base Mode Y-T, X-Y, Roll, Delayed
Number of X-Ys 1 path
Waveform Capture Rate [2] 30,000 wfms/s (dots display)
Vertical
Bandwidth (-3dB) DS1104Z: DC to 100 MHz
DS1074Z: DC to 70 MHz
Single Bandwidth DS1104Z: DC to 100 MHz
DS1074Z: DC to 70 MHz
Vertical Resolution 8 bit
Vertical Scale 1 mV/div to 10 V/div
Offset Range 1 mV/div to 499 mV/div: ± 2 V
500 mV/div to 10 V/div: ± 100 V
Bandwidth Limit1 20 MHz
Low Frequency Response
(AC coupling, -3dB)
≤5 Hz (on BNC)
Rise Time [1] DS1104Z: 3.5 ns
DS1074Z: 5 ns
DC Gain Accuracy [3] <10 mV: ±4% full scale
≥10 mV: ±3% full scale
DC Offset Accuracy ±0.1 div ± 2 mV ± 1% offset
Channel to Channel
Isolation
DC to maximum bandwidth: >40 dB
Trigger
Trigger Level Range ±5 div from the center of the screen
Trigger Mode Auto, Normal, Single
Holdoff Range 16 ns to 10 s
High Frequency
Rejection2
75 kHz
Low Frequency
Rejection2
75 kHz
Trigger Sensitivity [1] 1.0div (below 5mV or noise rejection is enabled)
0.3div (above 5mV and noise rejection is disabled)
Edge Trigger
Edge Type Rising, Falling, Rising&Falling
Pulse Trigger
Pulse Condition Positive Pulse Width (greater than, lower than, within specified interval)
Negative Pulse Width (greater than, lower than, within specified interval)
Pulse Width Range 8 ns to 10 s
Runt Trigger
Pulse Condition None, > (greater than), < (lower than), <> (within the specified interval)
Polarity Positive, Negative
Pulse Width Range 8 ns to 4 s
Windows Trigger 
Windows Type Rising, Falling, Rising&Falling
Trigger Position Enter, Exit, Time
Windows Time 8 ns to 10 s
Nth Edge Trigger
Edge Type Rising, Falling
Idle Time 16 ns to 10 s
Number of Edges 1 to 65535
Slope Trigger
Slope Condition Positive Slope (greater than, lower than, within specified interval)
Negative Slope (greater than, lower than, within specified interval)
Time Setting 8 ns to 10 s
Video Trigger
Signal Standard Support standard NTSC, PAL and SECAM broadcasting standards
Support 480P, 576P HDTV standards
Pattern Trigger
Pattern Setting H, L, X, Rising Edge, Falling Edge
Delay Trigger
Edge Type Rising, Falling
Delay Type > (greater than), < (lower than), <> (within the specified interval), >< (outside the specified interval)
Delay Time 8 ns to 10 s
TimeOut Trigger 
Edge Type Rising, Falling, Rising&Falling
TimeOut Value 16 ns to 10 s
Duration Trigger 
Pattern Setting H, L, X
Trigger Condition > (greater than), < (lower than), <> (within the specified interval)
Duration Time 8 ns to 10 s
Setup/Hold Trigger 
Edge Type Rising, Falling
Data Pattern H, L,X
Setup Time 8 ns to 1 s
Hold Time 8 ns to 1 s
RS232/UART Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, User
Data Bits 5 bits, 6 bits, 7 bits, 8 bits
I2C Trigger
Trigger Condition Start, Restart, Stop, Missing Ack, Address, Data, A&D
Address Bits 7 bits, 8 bits, 10 bits
Address Range 0x0 to 0x7F, 0x0 to 0xFF, 0x0 to 0x3FF
Byte Length 1 to 5
SPI Trigger
Trigger Condition TimeOut, CS
Timeout Value 16 ns to 10 s
Data Bits 4 bit to 32 bit
Data Line Setting H, L, X
Measure Manual mode | Voltage deviation between cursors (ΔV)
Time deviation between cursors (ΔT)
Reciprocal of ΔT (Hz) (1/ΔT)
Track mode | Voltage and time values of the waveform point
Auto mode | Allow to display cursors during auto measurement
Auto Measurement Measurements of Maximum, Minimum,
Peak-Peak Value, Top Value, Bottom Value,
Amplitude, Average, Mean Square Root,
Overshoot, Pre-shoot, Frequency, Period, Rise
Time, Fall Time, Positive Pulse Width, Negative
Pulse Width, Positive Duty Cycle, Negative
Duty Cycle, Delay A~B , Delay A~B , Phase
A~B , Phase A~B
Number of
Measurements
Display 5 measurements at the same time
Measurement
Range
Screen Region or Cursor Region
Measurement
Statistic
Counter
Average, Max, Min, Standard Deviation
Number of Measurements
Hardware 6 bits counter (channels are
selectable)
Math
Waveform A+B, A-B, A×B, A/B, FFT, &&, ||, ^, !, intg, diff, sqrt, lg, ln, exp, abs
FFT Window Rectangle, Hanning, Blackman, Hamming,Flat Top,Triangle
FFT Display Split, Full Screen
FFT Vertical Scale dB/dBm, Vrms
Number of Buses
for Decoding
2
Decoding Type Parallel (standard), RS232/UART (option), I2C (option), SPI (option)
Display
Display Type 7.0 inches TFT LCD display
Display Resolution 800 horizontal×RGB×480 vertical pixel
Display Color 160,000 Color (TBD)
Persistence Time Min, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite
Display Type Dots, Vectors
I/O
Standard Ports USB HOST, USB DEVICE, LAN, Aux (TrigOut /PassFail)
Signal Sourse (DS1000Z-S) 
Number of Channels  2
Sample Rate  200 MSa/s
Vertical Resolution  14 bits
Highest  Frequency  25 MHz
Standard Waveform  Sine, Square, Pulse, Triangle, Noise, DC
Arbitrary Waveform  Since, Exp.Rise, EXP.Fall, ECG, Gauss, Lorentz, Haversine
Sine  Frequency Range  0.1 Hz to 25 MHz
 Flatness  ±0.5 dB (relative to 1 kHz)
 Harmonic Distortion  -40 dBc
 Stray (Non-Harmonic)  -40 dBc
 Total Harmonic Distortion  1%
 Signal-to-Noise ration  40 dB
Square/Pulse  Frequency Range  0.1 Hz to 15 MHz
 Rise/Fall time  <15 ns
 Overshoot  <5%
 Duty Cycle  10% to 90%
 Duty Cycle  Resolution  1% to 10 ns (select the greater one)
 Minimum Pulse Width  20 ns
 Pulse Width Resolution  10 ns or 5 bits (select the greater one)
 Jitter  500 ps
Triangle  Frequency Range  0.1 Hz to 100 kHz
 Linearity  1%
 Symmetry  0 to 100%
Noise [1]  Bandwidth 25 MHz
Internal Generated
waveforms
 Frequency Range  0.1 Hz to 1 MHz
Arbitrary Waveforms  Frequency Range  0.1 Hz to 10 MHz
 Waveform Length  2 to 16k pts
Frequency  Accuracy 100 ppm (lower than 10 kHz)
50 ppm (greater than 10 kHz)
 Resolution  0.1 Hz or 4 bit, select the greater one
Amplitude  Output Range  20 mVpp to 5 Vpp, High-resistance
10 mVpp to 2.5 Vpp, 50 Ω
 Resolution  100 μV or 3 bit, select the greater one
 Accuracy  2% (1 kHz)
DC Offset  Range  ±2.5 V, High-resistance
±1.25 V, 50 Ω
 Resolution  100 μV or 3 bit, select the greater one
 Accuracy  2% (1 kHz)
General Specifications
Probe Compensation Output
Output Voltage [1] About 3 V, peak-peak
Frequency [1] 1 kHz
Power
Power Voltage 100-240 V, 45-440 Hz
Power Maximum 50 W
Fuse 2 A, T degree, 250 V
Environment
Temperature Range In operation: 0°C to +50°C
Out of operation: -40°C to +70°C
Cooling Method Fan
Humidity Range 0° to +30°C : ≤95°C relative humidity
+35°C to +40°C : ≤75°C relative humidity
+40°C to +50°C : ≤45°C relative humidity
Altitude In operation: under 3,000 meters
Out of operation: under 15,000 meters
Mechanical
Dimensions [4] Width×Height×Depth =313.1 mm× 160.8 mm×122.4 mm
Weight [4] Without package | 3.2 kg ± 0.2 kg
With package | 3.8 kg ± 0.5 kg
Adjustment Interval
  The recommended calibration interval is one year.
Regulation Standards
Electromagnetic 2004/108/EC
Compatibility Execution standard EN 61326-1:2006 EN
61326-2-1:2006
Safety UL 61010-1:2004; CAN/CSA-C22.2 NO.
61010-1-2004;
EN 61010-1:2001; IEC 61010-1:2001

Rigol DS1054Z Kit1 Product Specifications Summary:
(for full specs please see the full specs tab or the data sheet)

Oscilloscopes/Digital Oscilloscopes Template

Bandwidth What's This?50 Mhz
Channels4
Sampling Rate What's This?1 GS/S 
Memory What's This?12 MP [megapoints] (12288 kB)
Rise Time What's This?7 ns
Screen Type (Oscilloscopes)TFT/LCD
Screen Size7 IN
Bits What's This?8
Battery OptionsNo

Test Equipment General Attributes

Unique FeaturesThe Number 1 Selling Oscilloscope of 2015
4 Channels, 50 MHz Bandwidth
UltraVision: Deeper memory 12 Mpts upgradable to 24 Mpts via a software key
( this is not a typo. This scope has 12 Megs of Memory standard! )
Up to 30,000 wfms/s Waveform capture rate
HUGE 7'' screen WVGA(800X480) TFT
USB HOST, USB DEVICE, LAN, Aux (TrigOut /PassFail)
Incredible display with multi-Level intensity grading display
Realtime waveform Record,Replay, function (Opt.)
A variety of Math Functions
FFT function standard
A variety of Trigger Functions
Optional Serial Bus Triggering and Decoding functions(RS232,I2C,SPI) These are software keys
Standard Mask test function
Automatic Measurements with Statistics
This scope is truly amazing for the price. Deep memory, beautiful screen, 4 channels, free software,
USB host interface, standard usb interface on the back, LAN/Ethernet standard, Aux (TrigOut /PassFail)
Warranty3 YEARS
Calibration IncludedFactory Calibration
Power Supply Voltage120V/220V Universal
Safety ApprovalCE, CSA
Data Logging What's This?Yes 
Interfaces I/O LAN / Ethernet, LXI, USB Host, USB
Product Weight3 KILOS (6.61 LBS)
Shipping Weight4.2 KILOS (9.26 LBS)
ECCN Number3A992
HTS/Schedule B Number9030201500
Country of OriginChina

Reviews

Rigol DS1054Z Kit1 Customer Reviews

1 Reviews
5 stars
 (1)
4 stars
 (0)
3 stars
 (0)
2 stars
 (0)
1 star
 (0)
 
 
 
 
 
Average Customer Review
         
5 of 5
1 customer reviews
Share your thoughts with other customers
Create your own review
 
Most Helpful First | Newest First      Prev Page
 
Prev Page
 

Q & A

Q: Does the Rigol DS1054Z have the ability to record and play data from memory?
A: Yes. The DS1054Z does have record and playback functions. See the REC-DS1000Z option.

Q: Do you need the AT-DS1000Z Advanced Trigger Option to use the SA-DS1000Z Serial Bus Decoding with the Rigol DS1054Z?
A: No, you do not. You can manually set your triggers and then decode what you captured. However, it makes the process much, much easier if you have correct triggers already built.

Q: Could you confirm the maximum input voltage for the DS1054Z, using a 1x probe?
A: The Rigol DS1054Z comes with the RP2200 probes. In the 1x mode, the maximum input voltage is: 150Vrms. When in the 10x mode, the maximum input voltage is: 300Vrms. This is approximately equal to 425 VDC, if you consider the peak value. However, its always advised to use a DC Blocking capacitor when working with tube amplifiers with plate voltages over 300 Vdc.

Q: Is there a -S version of the DS1054Z with a built in generator?
A: The Rigol DS1054Z does not have a -S version with a built in generator.  The next model up the DS1074Z has a DS1074-S version with a built in generator.

Q: Is there a M version of the DS1054Z with logic analyzer option?
A: The Rigol DS1054Z does not have a -M version with Logic analyzer.  The MSO1074Z is the 70 Mhz version of this unit with the logic analyzer built in.  This is a hardware change and cannot be added after the purchase.  Keep in mind that Serial Bus Decoding with the Rigol DS1054Z can be done with the SA-DS1000Z software option.

Q: Why is the DS1054Z so inexpensive?
A: This is a question we often get asked about this unit.  It looks fantastic.  Why is it so inexpensive?  The answer to this is somewhat of an opinion here at TEquipment but Rigol wants market share.  They are making waves by having such a great unit at an unbelievable price. We like to see read the reviews.  Our customers write honest feedback. This unit is simply an AMAZING value.

Q: I am having trouble with my clip attachments staying on. How can I fix this?
A: Simply press the hook tip firmly in order to connect. You can view more information on this topic HERE!

Q: Can the Rigol DS1054Z show me harmonic content and distortion?
A: Yes it can by utilizing the FFT Math function. You can find the information in the User Guide on page 6-16.
FFT (Fast Fourier Transform) is used to transform time domain signals to frequency
domain components (frequency spectrum).
MSO1000Z/DS1000Z oscilloscope provides FFT operation function which enables users to observe the time domain waveform and spectrum of the signal at the same time. FFT operation can facilitate
the following works:
  • Measure harmonic components and distortion in the system
  • Display the characteristics of the noise in DC power
  • Analyze vibration
Q: When I capture a single trigger event, the only waveform information that is captured is whats on the screen, what can I do to get more capture time ?
A: What you need to do is change ( increase ) the memory depth manually. By default it is in AUTO mode. To increase the memory depth manually, press the ACQUIRE button, then select MEM DEPTH off the display menu, then use the multifunction knob and take it out of AUTO mode and set it the required memory depth. What is usually suggested as a starting point is the setting just before the maximum setting. Recapture the single triggered event and adjust the horizontal knob to move the displayed waveform left or right and confirm that you have captured a longer record length.
    Also be aware that the memory depth decreases for each channel that is turned on and this in turn decreases the record length of the capture.
Q: Is there a way to tell which displayed trace is what channel when I am using more than one channel ? Are the trace colors configurable?
A: The individual trace colors are not configurable, however, each of the displayed traces are different colors that match the color indicated just over the channel connector. Additionally, there are channel labels to the left of the trace which display the number of the corresponding channel for that trace. These labels can be edited. Its important to note that if there is a DC OFFSET on the signal then the trace marker will be offset as well; making it a little more difficult to identify the trace. As a last resort setting the scope to the channel in question and utilizing the vertical position control will also reveal which trace.

Q: When I use the X-Y mode, the refresh rate is really slow. Is there a way to increase it?
A: Yes, when using the X-Y mode, you need to take the memory depth out of AUTO and change it to 6 K.  This will increase the update rate substantially.
 

Accessories

Loading Accessories

Rigol Price List

Learn Before You Buy
Checkout Our Guides!

Instek MSO-2000E - Digital Oscilloscopes
Teledyne LeCroy WaveSurfer 510 1GHz digital oscilloscope
X


secured website

Interworld Highway, LLC dba TEquipment.NET

205 Westwood Avenue. Long Branch, NJ 07740

Privacy Policy | Terms and Conditions | Site Map

Copyright© 2016 Interworld Highway, LLC

secured website
We Price Match!

Give our sales team a call at 877.571.7901 (Toll Free) or 732.222.7077 (International) and we'll match any competitor's price.

X