| Main Output |
Frequency Range: |
0.5Hz ~ 5MHz in 7 ranges |
| Amplitude: |
> 10Vpp (into 50W load) |
| Impedance: |
50W ±10% |
| Attenuator: |
-20dB ±1dB x 2 |
| DC Offset: |
<-5V ~ >+5V (into 50W load) |
| Duty Control: |
80% : 20% : 80% to 1MHz continually variable |
| Display: |
6 digit LED display |
| Sine Wave |
Distortion: |
£1%, 0.5Hz ~ 100kHz THD £ -30dB fundamental in all ranges (specification applied from MAX to 1/10 level) |
| Flatness: |
£0.3dB, below 500kHz |
| Triangle Wave |
Linearity: |
³98% 0.5Hz to 100kHz
³95% 100kHz to 5MHz |
| Square Wave |
Symmetry: |
±2% 1Hz ~ 100kHz |
| Rise/Fall Time: |
£50ns at maximum output (into 50W load) |
| CMOS Output |
Level: |
4Vpp ±1Vpp ~ 14.5Vpp ±0.5Vpp adjustable |
| Rise/Fall Time: |
£120ns |
| TTL Output |
Level: |
³3Vpp |
| Fan Out: |
20 TTL Loads |
| Rise/Fall Time: |
£25ns |
| VCF |
Input Voltage: |
0V ~ 10V ±1V (100:1) |
| Input Impedance: |
10kW ±10% |
| Frequency Counter |
INT/EXT: |
Switch selectable |
| Range: |
0.5Hz to 5MHz (EXT 5Hz ~ 150MHz) |
| Accuracy: |
Time base accuracy ±1 count |
| Time Base: |
±20ppm (23°C ±5°C) after 30 minutes warm up |
| Resolution: |
Maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz |
| Input Impedance: |
1MW // 150pF |
| Sensitivity: |
£35mVrms (5Hz ~ 100MHz)
£45mVrms (100MHz ~ 150MHz) |
| Other Details |
Power Source: |
AC 115V/230V ±15%, 50/60Hz |
| Accessories: |
Power cord x 1, Instruction manual x 1, Test Lead (type GTL-101) x 2 |
| Dimensions: |
251mm (w) x 91mm (h) x 291mm (d) |
| Weight: |
2.4kg approx |
;)
