Tequipment
An InterWorld Highway, LLC Company
Call Us 1.877.571.7901
Rugged, reliable easy to use precision pressure calibration tools.--  Wide selection, all with a 3-year warranty!
 
 
 
 
 
Top Categories >

Fluke 772 Milliamp Process Calibrator

 
Fluke 772
Catalog #: 3362352
         
4 of 5
MILLIAMP PROCESS CLAMP METER
Free Gift From Fluke With Purchase

Features

  • Best in class 0.2 % accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without ”breaking the loop”
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • Automatically change the 4 to 20 mA output for remote testing
Loading Prices
Loading Callouts
Questions?
Ask Our Factory
Trained Engineers
M-F 8AM - 9PM EST
• 877.571.7901

Compare Products in this Series

Product Name Type True RMS Maximum Current DC Availability Price
772
772
MILLIAMP PROCESS CLAMP METER
Milliamp Process Clamp Meter No 100 mA (0.1 A)
771
771
MILLIAMP PROCESS CLAMP METER
Milliamp Process Clamp Meter No 100 mA (0.1 A)
773
773
MILLIAMP PROCESS CLAMP METER
Milliamp Process Clamp Meter No 100 mA (0.1 A)
773 HD
773 HD
MILLIAMP PROCESS CLAMP METER with Multipurpose Hard Case
Milliamp Process Clamp Meter No 100 mA (0.1 A)
FLUKE 772 MilliAmp Process Clamp meter

Fluke 772 Milliamp Process Calibrator

         
4 of 5
  Add to cart

Product Information

Need more hours in your day?
Save time by NOT breaking the loop on 4-20 mA signal measurements.

Are you spending time:

  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
  • Going back to the shop to get extra tools

 

If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 772 Clamp Meters will help you:

Milliamp Clamp Features Application How it saves time and money
Measure mA signals for PLC and control system analog I/O without breaking the loop. Measures low level dc current Correlate process indication with real physical value
Measure output signals from transmitters without breaking the loop Maintain and troubleshoot process and automation equipment without breaking the loop No disruption to the process
Detachable clamp with extension cable Measurements in tight locations Enables measurements in difficult situations
Measurement Spotlight Illuminates hard to see wires in dark enclosures Measurement process is easier and quicker
Measure up to 99.9 mA range non-contact Wide range of measurements Measures 10 to 50 mA signals in older control systems
Automatic power off After 15 minutes and 2 minute automatic off for backlight and spotlight Saves battery life

 

Comparison Chart

  Fluke-771 Fluke-772 Fluke-773
  Non-contact mA loop measurement Integrated mA loop troubleshooting Advanced process troubleshooting
mA measure, jaw
mA measure, in circuit  
Loop power  
mA source  
DCV measure    
DCV source    
mA scaled output    
mA in / out    

What's In The Box

  • Four AA alkaline batteries (installed)
  • Soft carrying case
  • TL75 test leads
  • AC 72 detachable clip
  • TL 940 mini hook test leads
  • Instruction sheet
  • Hanging tool with hook and loop strap

Specifications

Diameter of measurable conductor 0.177” or 4.5 mm max
Operating temperature -10 to 50 ºC
Storage Temperature -25 to 60ºC
Operating Humidity < 90% @ <30 ºC, < 75% @ 30 to 55ºC
Operating Altitude 0 to 2000 m
IP Rating IP 40
Size 59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
Weight 260G, (9.1 oz.)
Vibration Random 2 g, 5 to 500 Hz
Shock 1 meter drop test (except the jaw)
EMI/RFI Meets EN61326-1
Note: For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
Temperature Coefficient 0.01% ºC (<18? or > 28?)
Power, battery life (2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical
Warranty Three years for electronics; One year for cable and clamp assembly
mA measurement
(Measured by clamp)
Resolution and Range 0 to 20.99 mA
Accuracy 0.2% +2 counts
Resolution and Range 21.0 mA to 100.0 mA
Accuracy 1% + 5 counts
mA measurement
(Measured in series with test jacks)
Resolution and Range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
mA source
(Maximum mA Drive: 24 mA into 1,000 ohms)
Resolution and Range 0 to 24.00 mA
Accuracy 0.2% + 2 counts
mA simulate
(Maximum voltage 50 V dc)
Resolution and Range 0 to 24.00 mA
Accuracy 0.2% + 2 counts

Fluke 772 Product Specifications Summary:
(for full specs please see the full specs tab or the data sheet)

Clamp Meters/Clamp Meters Template

TypeMilliamp Process Clamp Meter
True RMS What's This?No
Maximum Current DC100 mA (0.1 A)
Minimum Current DC10 mA
Basic Voltage Accuracy.2%
Digits Display What's This?3.5
Resolution DC Current0.01 mA (0.00001 A)
Maximum Conductor Size0.177 IN
Auto Ranging/Manual What's This?Manual
Auto Power OffYes
Detachable JawYes
Rotating Jaw / SwivelNo
Peak HoldNo
Min/MaxNo
In-Rush Current What's This?No
Dual DisplayYes
Analog Bargraph on DisplayNo
BacklightYes
Remote DisplayNo
ResistanceNo
FrequencyNo
Continuity What's This?No
CapacitanceNo
Temperature (K T/C)No
Temperature (IR Sensor)No
Diode TestingNo
Overload ProtectorYes
True Power (KW)No
Apparent Power (VA) What's This?No
Power Factor (PF)No
Single Phase/Three PhaseSingle Phase
Crest FactorNo
Energy (KWh)No
Reactive Power (KVAR)No
Source/Simulate (Process Clamp)Yes

Process / Calibration/Milliamp Calibrators Template

Source/Simulate DC CurrentYes
Measure DC CurrentYes
Two Wire Transmitter SimulationYes
Percent DisplayYes
Accuracy0 to 20.99 mA: 0.2%+2 counts
21.0 mA to 100.0 mA: 1%+5 counts
Simulate Loop VoltageYes
Ramp/Step OutputYes
FieldBus CompatibleNo

Process / Calibration/Signal Calibrators/Loop Calibrators Template

Hart CompatibleNo
Battery Life12 HR
Intrinsically Safe What's This?No

Test Equipment General Attributes

Unique FeaturesmA in/out: simultaneously measure the mA signal
with the clamp and source a mA signal
– Apply a mA input signal to a device and measure
its’ 4 to 20 mA output on devices such as valves or mA isolators.
Warranty3 YEARS
Warranty DetailsOne-year on mA clamp assembly and cable.
Calibration IncludedFactory Calibration
Power Supply VoltageBattery Powered
Data Logging What's This?No
IP Rating What's This?IP40
Product Weight14.4 OUNCES (0.9 LBS)
Product Height9.75 IN
Product Length1.62 IN
Product Width3 IN
ECCN Number3A992
HTS/Schedule B Number9030.31.0000
Country of OriginChina

Reviews

Accessories

Loading Accessories

Reviews

Fluke 772 Customer Reviews

4 Reviews
5 stars
 (2)
4 stars
 (1)
3 stars
 (0)
2 stars
 (0)
1 star
 (1)
 
 
 
 
 
Average Customer Review
         
4 of 5
4 customer reviews
Share your thoughts with other customers
Create your own review
Product: Fluke 772
          1.0
 
Anonymous
Location: Trinidad & Tobago
Recommended: No

Poor Clamp design

The plastic hinge on the Clamp is poorly designed. Unless you treat it with kid gloves, it breaks. This happened on two of our meters. Fluke will offer warranty replacement, but it is not worth the hassle when you need an industrial quality instrument that may fail under normal use.
2 out of 2 found this review helpful. Did this help? Yes No
 
Product: Fluke 772
          4.0
 
Raah
Location: NEWARK Delaware United States
Recommended: Yes

Good Service

The service was up to the mark and the product was per our requirement. It got delivered in a timely manner
0 out of 0 found this review helpful. Did this help? Yes No
 
Product: Fluke 772
          5.0
 
clinton T. Holley Jr
Location: LONGVIEW TX US
Recommended: Yes
TEquipment.NET Verified Purchase

construction manager

tool works great. Ma readings without all the de-term and re-term issues.
0 out of 0 found this review helpful. Did this help? Yes No
 
Product: Fluke 772
          5.0
 
IHC
Location: DETROIT MI US
Recommended: Yes
TEquipment.NET Verified Purchase

Works great, best pricing, quick shipment

Works great. Best pricing and quick shipment!
0 out of 0 found this review helpful. Did this help? Yes No
 
No reviews found to display for this rating.

Fluke Price List

X


secured website

Interworld Highway, LLC dba TEquipment.NET

205 Westwood Avenue. Long Branch, NJ 07740

Privacy Policy | Terms and Conditions | Site Map

Copyright© 2016 Interworld Highway, LLC

secured website
We Price Match!

Give our sales team a call at 877.571.7901 (Toll Free) or 732.222.7077 (International) and we'll match any competitor's price.

X