Tequipment
An InterWorld Highway, LLC Company
Call Us 1.877.571.7901
Hioki Clampmeters with Bluetooth
 
 
 
 
 
Top Categories >

FLIR CM85 1000A Power Clamp Meter with VFD and Bluetooth

 
FLIR CM85
Catalog #: CM85
         
4 of 5
FLIR Industrial 1000 Amp Power Clamp w/VFD Mode and Bluetooth METERLiNK

Features

  • CM85 1000A Power Clamp Meter with VFD and Bluetooth
  • VFD Mode: Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
  • Harmonics Mode: Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
  • Phase Rotation: Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
  • Inrush Current: Measure hard and soft start-up inrush current spikes while equipment is ramping up.
  • METERLiNK Compatibility: Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.
  • Power Factor and Active Power: Monitor power quality improvements, such as start-up realignments on three-phase equipment.
  • Bluetooth Connectivity: Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.
  • Bright Dual-LED Worklights: Make your work safer/easier in poorly lit locations- especially useful when the lights are out or obstacles block your inspection targets.
  • Rugged & Shock-Resistant: Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.
Loading Prices
List Price: $399.99
Sale: $279.99
  + Free shipping over $99

Questions?
Ask Our Factory
Trained Engineers
M-F 8AM - 9PM EST
• 877.571.7901

Compare Products in this Series

Product Name Type True RMS Maximum Current AC Availability Price
CM85
CM85
FLIR Industrial 1000 Amp Power Clamp w/VFD Mode and Bluetooth METERLiNK
Power Clamp Meter Yes 1000 A
CM83
CM83
FLIR 600A Power Clamp
Power Clamp Meter Yes 600 A
CM82
CM82
FLIR Industrial 600A Power Clamp with VFD mode
Power Clamp Meter Yes 600 A
CM82-NIST
CM82-NIST
FLIR Industrial 600A Power Clamp with VFD Mode and NIST
Power Clamp Meter Yes 600 A
CM85-NIST
CM85-NIST
FLIR Industrial 1000 Amp Power Clamp Meter w/VFD Mode, Bluetooth...
Power Clamp Meter Yes 1000 A
CM83-NIST
CM83-NIST
FLIR 600A Power Clamp with NIST
Power Clamp Meter Yes 600 A
FLIR CM85 1000A Power Clamp Meter with VFD and Bluetooth

FLIR CM85 Power Clamp Meter with VFD and Bluetooth, 1000A

         
4 of 5
  Add to cart

Product Information

FLIR CM85 1000A Power Clamp Meter with VFD and Bluetooth.
Industrial-Grade Power Clamp Meter Tackles Noisy VFD Jobs
Discover the FLIR CM85, a powerful 1000A AC/DC clamp meter that offers advanced power analysis functions which adds confidence when making measurements in environments where loads are using switching electronics such as variable frequency drives (VFDs) and today’s growing range of high efficiency lighting options. Designed by leaders in innovation at FLIR Systems, the durable power clamp gets you results on tough jobs.

In addition to True RMS current and voltage measurements, the CM85’s VFD Mode leverages a low-pass filter that ensures accuracy even when distorted waveforms exist on electronic loads (such as VFD-controlled equipment).

Power quality testing and load studies (to plan for future system-wide capacity) demand essential power measurement capabilities that set the FLIR CM85 power clamp meter apart from other test equipment. Measure power up to 1000kW as well as Total Harmonic Distortion and harmonics to the 25th harmonic helping you find problems that could cause the malfunctioning, damage or failure of important components.

The fast-responding in-rush current mode enables the meter to display the highest current reading in the first 100 milliseconds after the trigger point. A capability that is ideal for getting to the root cause of nuisance tripping, spurious resets and transients.

Bluetooth Connectivity
Designed for today’s technician, the advanced FLIR CM85 connects via Bluetooth to Android smartphones and tablets using the FLIR Tools Mobile app. Now, you can monitor electrical readings on equipment in closed cabinets, with dangerous moving components, or with extreme temperatures – all from a safe distance. Use the app to share diagnostic results with colleagues or customers on-site or remotely—share as primary readings or within professional-looking reports that are easily created.

As part of the FLIR family, this innovative meter also communicates with METERLiNK-enabled FLIR IR cameras, helping you record electrical readings on thermal images in real time. Whether you’re working on complex electrical, mechanical or pump systems, you want tools that can work together to gather and record all the relevant data—temperature and electrical together on one thermal image. This not only means you save time, it also ensures accurate, coordinated documentation for PdM inspection reports.

About the CM85
The FLIR CM85 clamp meter offers both safety and versatility without compromising high performance. Take the CM85 amp probe on every job as it delivers with advanced meter functions including True RMS accuracy, VFD filter mode, Power Quality Mode (THD, harmonics, watts, phase rotation) AC/DC current and voltage measurement, resistance, capacitance, frequency, diode-test, and continuity check. Use the fast-responding peak hold function to capture inrush currents and transients.

The 4-digit, 4,000 count display is LED-illuminated making it bright and easy to read from anywhere. Several one-button functions including data hold, min/max, and selectable auto- or manual-ranging. A relative function helps you “zero out” the meter. The large 1.45" (37mm) jaw opening handles conductors up to 1000 MCM.

The FLIR CM85 amp clamp has a CAT IV-1000V, CAT III-1000V overvoltage safety rating. NIST certification is available for this product.

A Brighter Idea
The FLIR CM85 amp meter delivers on the value of added safety with a built in Non-Contact Voltage Detector and a built-in worklight. The non-contact voltage detector allows you to quickly and conveniently check for voltage prior to attaching the clamp meter’s test leads to the device under test—all without reaching for a separate voltage pen.

This clamp meter also features a super-bright, dual-LED worklight that illuminates dark or poorly-lit work areas without the use of a flashlight. This built-in light frees up a hand, adds confidence when performing visual inspections (for wear, pitting, dirt, corrosion and dust) and makes it easier to read faded labels and other markings.

For peace of mind, FLIR backs up its durable clamp meters with a limited lifetime warranty.

CM85 at a Glance:
  • Bluetooth connectivity to FLIR’s Android app & thermal imagers
  • 1000A AC/DC Clamp
  • VFD Filter
  • Power Factor Functions
  • True RMS, Autoranging
  • Peak, Hold, Max./Min., Relative data functions
  • 1.45” (37mm) jaw opening
  • Silicone test leads
  • Limited Lifetime Warranty

What's In The Box

  • Clamp meter
  • CAT IV silicone test leads
  • 6 AAA batteries
  • User manual/CD

Specifications

TECHNICAL SUMMARY CM82 CM83 CM85 BASIC ACCURACY
AC/DC Current 600A 600A 1000A ±2%
AC/DC Voltage 1000V 1000V 1000V ±1% / 0.7%
AC VFD Voltage 1000V 1000V 1000V ±1%
Harmonics 1st-25th Order 1st-25th Order 1st-25th Order ±5%
Total Harmonic Distortion 0.0 to 99.9% 0.0 to 99.9% 0.0 to 99.9% ±3%
Inrush Current 600ACA
(Integration Time 100ms)
600ACA
(Integration Time 100ms)
1000ACA
(Integration Time 100ms)
±3%
Active Power 10kW to 600kW
(10V, 5A min)
10kW to 600kW
(10V, 5A min)
10kW to 1000kW
(10V, 5A min)
±3%
Diode Test 0.4 to 0.8V 0.4 to 0.8V 0.4 to 0.8V ±0.1V
Capacitance 3.999mF 3.999mF 3.999mF ±1.9%
Resistance 99.99kΩ 99.99kΩ 99.99kΩ ±1%
Continuity Threshold 30Ω 30Ω 30Ω ±1%
Frequency 20.00Hz to 9.999kHz 20.00Hz to 9.999kHz 20.00Hz to 9.999kHz ±0.5%
Bluetooth Range Max 32ft (10m) 32ft (10m)
Jaw Opening 1.45in (37mm, 1000MCM) 1.45in (37mm, 1000MCM) 1.77in (45mm)
Category Rating CAT IV-600V, CAT III-1000V
Battery Type 6 x AAA
Warranty Limited Lifetime*

FLIR CM85 Product Specifications Summary:
(for full specs please see the full specs tab or the data sheet)

Clamp Meters/Clamp Meters Template

TypePower Clamp Meter
True RMS What's This?Yes
Maximum Current AC What's This?1000 A
Maximum Voltage AC1000 V
Maximum Voltage DC1000 V
ResistanceYes 
FrequencyYes 
Continuity What's This?Yes
CapacitanceYes 

Test Equipment General Attributes

Shipping Weight2.3 LBS
Country of OriginTaiwan

Reviews

Accessories

Loading Accessories

Reviews

FLIR CM85 Customer Reviews

1 Reviews
5 stars
 (0)
4 stars
 (1)
3 stars
 (0)
2 stars
 (0)
1 star
 (0)
 
 
 
 
 
Average Customer Review
         
4 of 5
1 customer reviews
Share your thoughts with other customers
Create your own review
Product: FLIR CM85
          4.0
 
Micheal Foster
Location: Edmonton AB CA
Recommended: Yes
TEquipment.NET Verified Purchase

Meter works great but

Meter fictions well, clamp is nice and big but I noticed the battery doesn't last a very long time if you are using the LED light and using the meter often. I was just recently at a service call and it was about an 8 hour service call doing various fixes, and the battery was dead by the end of the 8 hours. Mind you I did use the LED light often, but for 6 AAA batteries I would suggest getting rechargeables to be easier on the wallet if you use it often. Other then that everything works well.
0 out of 0 found this review helpful. Did this help? Yes No
 
No reviews found to display for this rating.

FLIR Price List

Fluke 376
X


secured website

Interworld Highway, LLC dba TEquipment.NET

205 Westwood Avenue. Long Branch, NJ 07740

Privacy Policy | Terms and Conditions | Site Map

Copyright© 2016 Interworld Highway, LLC

secured website
We Price Match!

Give our sales team a call at 877.571.7901 (Toll Free) or 732.222.7077 (International) and we'll match any competitor's price.

X