Analog Soldering Station; Power Unit, Soldering Pencil, Stand, Sponge

The Weller Advantage

• Innovative heater and sensor combination gives you quick heat-up and rapid temparature recovery.
• Wireless temparature lockout to prevent operators from raising the temparature to levels higher than specified for the board or component. Gives you control over the process.
• Station automatically powers down after 90 minutes of inactivity to prolong tip life and save power.
• Applications: Production, rework, and repair of through the hole and SMT boards. Most ground planes and multi-layer boards.

The WES51 Soldering Station is one in a series of products, which have been developed for industrial manufacturing as well as for the rework and repair sector. The microprocessor control allows for simple and easy operation. The digital electronic control system offers excellent control performance for various soldering jobs.

A grounded soldering iron tip, zero power switching and anti-static design of the station and tool allows the WES51 Soldering System to meet the high quality standards established by Weller®. The station features external tip temperature offset and the ability to lock the tip temperature setting using the PW50 Probe supplied. The station will automatically enter a sleep mode and shut off power to the tool and indicator LED after 99 minutes of inactivity.

Tip temperature is adjustable in the range of 350°F to 850°F (177°C to 454°C), with the front panel temperature control knob. The LED power indicator will be "Green" for normal operation or "Red", if the temperature is "Locked". The LED for the WES51 will also indicate the operation of the station by the following sequence: Indicator LED full "On", indicates that the station is ramping up to temperature (this can be indicated in either the "Green" - Unlocked mode or the "Red" - Locked mode). Indicator LED full "Off" or flashing steadily, indicates that the station has reached the "Set Point" (this also can be indicated in either the "Green" - Unlocked mode or the "Red" - Locked mode). This soldering station is UL/CUL listed and meets all applicable standards for the CE mark.