|
Velleman HPS10
2MHz Personal Scope 10MS/s
Description
|
The Velleman Personal Scope is not a graphical multimeter but a complete portable oscilloscope at the size and the cost of a good multimeter. Its high sensitivity - down to 0.1mV/div - and extended scope functions make this unit ideal for hobby, service, automotive and development purposes. Because of its extreme value for money, the PersonalScope is well suited for educational use in schools and colleges. Suitable for measurements on audio equipment, mains voltage applications, digital signals, all kind of sensors, signal analysis in automotive applications, car stereo, etc… Its full auto setup function, makes measuring waveforms very easy.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| HPS10 |
HANDHELD OSCILLOSCOPE 2MHz BANDWIDTH |
$229.99 |
| $173.04 |  |
|
| HPS10SE |
PERSONAL SCOPE 10MS/s - SPECIAL EDITION
*FREE IWH C-66 CASE* |
$247.20 |
| $149.95 | |
|
| HPS40 |
HANDHELD OSCILLOSCOPE 12MHz BANDWIDTH |
$299.99 |
| $234.00 | |
|
*NOTE: There is a $50.00 minimum on all Velleman orders
| Specifications |
| Maximum sample rate |
10MHz for repetitive signals (2MHz for single shot events) |
| Maximum input amplifier bandwidth |
2MHz ( -3dB at 50mV, 1V & 20V /div x1 setting) |
| Input impedance |
1Mohm // 20pF (standard oscilloscope probe) |
| Maximum input voltage |
100Vpeak (AC + DC), 200Vpeak-peak (AC only) |
| Input coupling |
DC, AC and GND (GND for auto zero reference) |
| Vertical resolution |
8 bit ? 1bit linearity |
| Trigger modes |
Run, Normal, Once, Roll mode for 1s/div and slower timebase |
| LCD Graphics |
64 x 128 pixels |
| Signal storage |
256 samples with 2 memories, max. 125 samples visible (256 using X shift) |
| dBm measurement |
(0dBm= 0.775V in 600ohm) From -73dB tot +40dB (up to 60dB with X10 probe) +0.5dB accuracy |
| dBV measurements |
(0dBV= 1V) From -75dB tot +38dB (up to 58dB with X10 probe) +0.5dB accuracy |
| True-rms measurement |
From 0.1mV to 80V (up to 400Vrms with X10 probe) 2.5% accuracy |
| Peak to peak AC range (sine wave reference) |
0.1mV to 160V (1mV to 1200V with x10 probe) 2% accuracy |
| Timebase range in 32 steps |
0.2µs to 1hour / division |
| Input sensitivity range in 12 steps |
5mV to 20V/division at X1 - 50mV to 200V/div at X10 |
| Probe calibration output |
Approx. 2KHz / 5Vpp |
| Supply voltage |
9VDC/ min 300mA adapter (unregulated) 12VDC if regulated |
| Batteries (option) |
Alkaline type AA or Ni Cd / NiMH rechargeable (5 pcs required) |
| Charge current for rechargeable batteries |
90mA |
| Battery life |
Up to 20h with Alkaline batteries (OFF or standby current < 500µA) |
| Operating temperature |
0 to 50°C (32 to 122°F) |
| Physical characteristics |
Dim- 105x220x35mm (4.13x7.95x1.38”) Weight 395g (14oz.) ex. Batteries |
|
;)
;)
;)
;)
;)
;)
