| Model |
OS-9060 |
| CRT |
| Configuration and Useful Screen |
6-inch
Rectangular Screen with internal Graticule: 8 ×10div(1div=1cm) Marking
for Measurement of Rise Time 2mm Subdivisions Along The Central Axis. |
| Accelerating Potential |
+10KV Approx.(Ref. Cathode) |
| Phosphor |
P31(Standard) |
| Focussing |
Possible(With Auto-Ficus Connection Circuit) |
| Trace Rotation |
Provide |
| Intensity Control |
Provide |
| Z-AXIS INPUT(INTENSITY MODULATION) |
| Input Signal |
Positive Going Signal Decreases Intersity +5Vp-p or |
| More Signal Cases Noticeable Modulation at Normal Intensity Settings |
| Bandwidth |
DC to 3.5MHz(-3dB) |
| Coupling |
DC to 2MHz(-3dB) |
| Input Impedance |
20K? - 30? Typical |
| Maximum Input Voltage |
30V (DC+Peak AC) |
| VERTICAL DEFLECTION |
| Bandwidth |
(-3dB) |
| DC Coupled |
DC to 60MHz Nominal
DC to 10MHz Magnified |
| AC Coupled |
10Hz to 60MHz Nominal
10Hz to 10MHzMagnified |
| Modes |
CH1, CH2, DUAL, ADD, ALT, ALT, CHOP |
| Deflection Factor |
5mV/div to 5V/div in 11 Calibrated Steps of A 1-2-5 Sequence |
| Continuously Variable Between Steps at Least 1 |
2.5 |
| Accuracy |
Normal : ±3%, Magnified : ±5% |
| Input Impedance |
1MO in Parallel with Approx. 30pF |
| Maximum Input Voltage |
Direct 400V (DC+Peak AC) with Probe : Refer to Probe Specification |
| Input Coupling |
DC-GND-AC |
| Rise Time |
5.8ns or Less
(35ns or Less : ×5MAG) |
| CH1 Out |
20mV/div into 50Ω : DC to 10MHz (-3dB) |
| Polarity Inversion |
CH2 Only |
| HORIZONTAL DEFLECTION |
| Diplay Mode |
Normal, X-Y, ×10, Variable |
| Time Base |
0.1?/div to 0.2s/div in 20 Calibration Steps. 1-2-5 Sequence Uncalibrated Continuous Control Between Steps at least 1:2.5 |
| Sweep Magnification |
10 Times (Maximum Sweep Rate : 10ns/div) |
| Accuracy |
±3%, ±5% (0ºC to 40ºC)
Additional Error for Magnified ±2% |
| TRIGGER SYSTEM |
| Modes |
AUTO, NORM, TV-V, TV-H |
| Source |
CH1, VERT (CH1, CH2), EXT, LINE |
| Coupling |
AC |
| Slope |
+ or - |
| Sensitivity and Frequency Auto(30Hz or More), Norm |
2MHz~30MHz
(OC-9030) / 10MHz~60MHz
(OC-9060) |
| INT |
0.5 div |
| EXT |
0.2 Vp-p |
| TV-V, TV-H |
At Least 1div or 10Vp-p |
| External Trigger |
| Input Impedance |
1MO(in Parallel with Approx. 25pF) |
| Max input Voltage |
400V (DC+Peak AC) |
| X-Y OPERATION |
| X-AXIS |
(Same as CH1 Except for The Following Deflection Factor |
| Same as That of CH1 Accuracy : ±5%) |
| Y-AXIS |
Same as CH2 |
| X-Y Phase Difference |
3' or Less (At DC to 50KHz) |
| CALIBRATOR |
| Probe Adjustment |
1KHz (±20%) Frequency, 0.5V (±20%) |
| Square Wave Duty Ratio |
40~60% |
| POWER SUPPLY |
| Voltage Range |
FUSE (250V)
iEC127 |
| 115V |
F1.25 AL |
| 230V |
F0.63 AL |
| Frequency |
50/60Hz |
| Power Consumption |
Max 45W |
| PHYSICAL CHARACTERISTICS |
| Weight |
8.2Kg |
| Size |
370mm(W)×137mm(H)×416mm(D) |
| ENVIRONMENTAL CHARACTERISTICS |
| Temperature |
Temperature range for Rated Operation +10ºC to +35ºC (+50ºF to +95ºF)
Max Ambient Operating Temperature :0ºC to +40ºC (+32ºF to +104ºF)
|
| Max Storage Temperature |
-20ºC to +70ºC (-4ºF to +158ºF) |
| Humidity |
Range for Rated Operation :45% To 85% RH/Max
Ambient Operating Humidity :35% To 85% RH |
;)
