company logo Transmation SD0612G
Isolated Module for 1091
100 PSIG / 2700" H2O, 0.07%
     Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.  
 
 
 

Transmation SD0612G
Isolated Module for 1091
100 PSIG / 2700" H2O, 0.07%


Transmation SD0612G
Click image to enlarge

 Transmation SD0612G

Features:
  • Compact, Mounts Easily to Top of 1091
  • Single Port, 1/4" NPT-18 Threaded Fitting
  • Auto Zero Function
  • Worldwide Engineering Units


  Description

Transmation SD0612G Non-Isolated 100 PSI Module for 1091

Diaphragm Isolated Pressure Transducer Modules are designed to be used with a Model 1090 or 1091 Pressure FleiTESTER for wetted media pressure loop maintainenece. The modules aacept any fluid or gas compatible with 316 Stainless Steel and flourocarbon rubber.

Each module is computer-corrected and electronically compensated to permit full compatibility of any module with any 1090 or 1091. Calibrated accuracy of each 1090/1091-module combination is ±0.01% of full scale.

The small, lightweight, quick-connect modules install on top of the calibrator in seconds. They are secured by two quarter-turn captive screws and a keyed, gold-plated connector.

Present module offering cover pressure spans from 16.000 to 50000 psig. Values are displayed in engineering units of your choice: psig, inches or millimeters of water, kil Pascals, Bar, or kilograms force/cm2. This eliminates any need for time-consuming calculations and the potential errors involved in performing them.

Modules are available insingle scale and switch-selectable dual scale versions. A pushbutton on top of the module is used to automatically zero the unit to atmospheric pressure, ensuring accurate measurements.

These modules are Fm approved as nonincendive in Class I, Division 2, Groups A, B, C, & D hazardous locations when used with a 1090. Approval of the 1091 is pending.


  Models, Options, & Accessories


Model Description List Price Sale Price
SD0612G Isolated Module for 1091, 100 PSIG / 2700" H2O, 0.07% $2255.00
$2232.45 
PPGI0016 Isolated 16 PSI Module for 1091PLUS, 0.05% Accuracy $1872.00
$1853.28 
PPGI3000 Isolated 3000 PSI Module for 1091PLUS, 0.05% Accuracy - Discontinued - no replacement
PPGI0500 Isolated 500 PSI Module for 1091PLUS, 0.05% Accuracy $1872.00
$1853.28 
PPGI0033 Isolated 33 PSI Module for 1091PLUS, 0.05% Accuracy $1872.00
$1853.28 
PPGI0050 Isolated 50 PSI Module for 1091PLUS, 0.05% Accuracy $1872.00
$1853.28 
PPGI0100 Isolated 100 PSI Module for 1091PLUS, 0.05% Accuracy $1872.00
$1853.28 
PPGI0150 Isolated 150 PSI Module for 1091PLUS, 0.05% Accuracy $1872.00
$1853.28 
PPGI0300 Isolated 300 PSI Module for 1091PLUS, 0.05% Accuracy $1872.00
$1853.28 
SD0412G Isolated Module for 1091, 33 PSIG / 830" H2O, 0.07% $2255.00
$2232.45 
SD1312G Isolated Module for 1091, 150 PSIG / 4000" H2O, 0.07% $2255.00
$2232.45 
SD1412G Isolated Module for 1091, 250 PSIG / 7000" H2O, 0.07% $2255.00
$2232.45 
SD1612G Isolated Module for 1091, 500 PSIG / 14000" H2O, 0.07% $2255.00
$2232.45 
SD2118G Isolated Module for 1091, 1000 PSIG / 70 Bar, 0.07% $2255.00
$2232.45 


  Specifications

SD0612G Module
Area Classification FM approved: nonincendive Class I, Division 2, Groups A, B, C, & D hazardous locations when used with an FM approved Transmation Model 1090 pressure FlexiTESTER
Calibrated accuracy ±0.01% of full scale. (combined 1090-module)
Repeatability ±0.02% of span
Auto-Zero Pushbutton sets 1090 display to Zero ± 1 count
Wetted Material 316 stainless steel, Fluorocarbon rubber
Media Compatibility Fluid or gas non-corrosive to 316 stainless steel or fluorocarbon rubber
Sensor Volume 2cc to bottom of any engaged fittings
Pressure Connections Threaded internal 1/4"-18 NPT fittings
Hexagonal wrenching surface; 1 1/8" across flats
Overpressure Rating 2X full scall rating for zero shift of less than ±0.05% of span
Operating Temperature (Media) -28°C to 82°C (-20°F to 180°F)
Ambient Temperature Range 4°C to 50°C (40°F to 120°F)
Temperature Effect ±0.018% per °C (±0.01%/F°) over media and ambient temperature ranges
Dimensions 51mm X 114mm X 55mm (2" X 4.5" X 2018"), HWD

Transmation 1091PLUS Calibrator Specifications
Input Ranges Current: -50.00 to + 50.00 mA
Voltage: -50.00 to + 50.00 V
Millvolt: -99.99 to 100.00 mV
Input Calibrated Accuracy Current: ±).01% of reading + 0.01% of span ± 1 L.S.D.
Voltage: ±0.01% of reading ± 1 L.S.D.
Millivolt: ± 0,01% of reading ± 1 L.S.D.
Pressure: ±0.01% of reading + 0.01% of span ± 1 L.S.D
Input Impedance Current: 10 Ω nominal
Voltage: 1 Mω nominal
Millivolt: 1Mω nominal
Temperature Coefficient 0.002% of span per °F
Common Mode Effect 0.01% of span maximum at maximum common mode voltage (input-to-case and input-to-output)
Maximum Common Mode Voltage 250 VDC or 120 VRMS @ 50/60 Hz
Normal Mode Rejection 60 dB minimum @ 50/60 Hz
Input Protection mA input protected via 1/8 amp fuse
Output Ranges Current: 0 to 22.00 mA
Voltage: 0.11.00 V
Millivolt: 0 to 110.00 mV
Output Calibrated Accuracy Current: ±0.01% of reading ± 1 L.S.D.
Voltage: 0.01% of reading ± 1 L.S.D.
Millivolt: 0.01% of reading ± 1 L.S.D.
Output Load Drive (Current) 500 Ω maximum @ 20 mA
Output Impedance (Voltage) 10 Ω
Output Impedance (Millivolt) 1 Ω
Output Protection Protected against output short circuit
Output Noise 0.01% of span
Power Supply 24 VDC typical @ 20 mA for powering two-wire transmitters
Electrical isolation 250 VDC or 200 VAC RMS (input-to-case and input-to-output)
Stability Short Term (24 hours); 0.01% of span
Long Term (30 days); 0.02% of span
Storage Temperature -30°C to 60°C {-22°F to 140°F}
Operating Temperature 0°C to 49°C {32°F to 122°F}
Power Rechargeable nickel-cadmium batteries in a Transmation AC Snap-Pack Battery cartridge
Auto-Zero Pushbutton operated; sets Readout Module display to 0 ± 1 count; disabled when not in pressure mode
Agency Appovals Pending
Charge Life Typically provides 25 hours use in measurement mode, 9 hours use for current output @ 20 mA or 24V loop power @ 20mA
Low Battery Indication Display indicates low battery condition when the battery voltage approaches the end of its charge life (4.7V typical)
Display 5 digit liquid crystal display with the status annunciators for pressure units, milliamp, volt, millivolts, input, output, polarity, overrange, and low battery
Input / Output Connections Miniature banana jacks
Housing Interlocking anodized aluminum exttrusions
Dimensions (HxWxD): 273mm x 114mm x 55mm (10.75 x 4.5 x 2.175") with Transducer Module installed
Weight 1.86kg (4.1lb) including Transducer module and Snap-Pack Battery Cartridge



 

Welcome | Companies | Search by Type | How To Order | Leasing | About Us | Careers
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
 BBBOnline Reliability Seal, Click for confirmation page. Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET 		 




Fluke Sponsored March Madness Bracket Challenge

Quote Request

We Take POs, How To Order

Free Shipping on Select Premier Lines










Live chat by BoldChat
Let our engineers and cs staff help!
Need a quote? Need to check stock?
Have a technical question? No problem.
We are here to help.