|
Test-Um TG300 Latch Test in a Cordura Pouch
Click image to enlarge
Test-Um TG300
|
|
Tone Generator Features:
- Two tone amplitude levels - normal and half
- Half amplitude is unbalanced for stronger signal on twisted pairs, CAT 5/6 cables
- Three distinctly different tones selected from front panel
- Constant Amplitude Signal over life of battery for 100% signal strength all the time
- Auto-off of tone after 3 hours - no dead battery if left on
Continuity Tester Features:
- Four continuity modes - Normally Open (NO), Normally Closed (NC) indication modes either latched or direct reading
- Audible and visual indication of continuity results, audible can be turned off
- Auto-off after 30 minutes of inactivity
General Features:
- Compact, durable case with recessed control panel
- High quality silicon alligator-clips cable permanently attached
- RJ jack allows use of modular cable without adapters
- Battery low indicator
- Lanyard attachment loop
Warranty:This warranty extends for a period of 12 months from the date of manufacture or proof-of-purchase.
|
 Click here to download the Instruction Manual
Description
A combination advanced tone generator and continuity tester for sensors, switches, and circuits used in security/alarm systems.
Package Contents
Associated Kits
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| TG300 |
Latch-Test security/alarm tone generator in a nylon pouch |
| $58.56 |  |
|
| Model |
Accessories |
List Price |
Sale Price |
| PC300 |
Nylon pouch for Lil' Buttie-series telephone test set, tone tracer and tone generator |
| $34.00 | |
|
| TG20 |
RJ11 to angled bed-of-nails cord set for tone generator - 24" |
| $15.67 | |
|
| TG10 |
RJ11 to alligator clip set for tone generator - 24" |
| $6.78 | |
|
Specifications
| Power Requirements |
| one 9 volt alkaline battery |
| Battery Life (Alkaline, 540 mA-hr) |
| 120 hours typical |
| Tone frequencies (±1%) |
| Dual – |
1165 and 874 Hz |
| Single – |
999 Hz |
| Tone power Typical (into 600 ohms, new battery to 5.0V) |
| LO = |
1.7 dBm |
| HI = |
7.6 dBm |
| Continuity thresholds |
| Loop R open |
>4.5K ohms |
| Loop R closed |
<1.5K ohms |
| Typical threshold = |
3K ohms |
| Voltage Protection |
| Status and tone: |
DC = 60 volts continuous
AC = 300V peak, 2 sec
|
| Continuity: |
DC = 140 volts
AC = 140 volts RMS
|
| Dimensions |
| Width: |
1.75 inches
|
| Length: |
4.5 inches |
| Depth: |
1.3 inches |
| Weight: |
5.0 oz. with battery |
|
;)