|
Test-Um NT700 LanScaper Network Tester
Click image to enlarge
Test-Um NT700
|
|
Features:
- Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting such crucial information as network speed, capability and location of switches and other network devices.
- Pinging function verifies connectivity to network devices and queries PC/NIC's.
- Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing
- Conducts link tests to ID speed
- Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result
- Automatically accesses DHCP host and obtains network information
- Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals
- Identifies HUBs, NIC, or auto MDI/MDI-X devices
- Blinks HUBs to ascertain connected configuration
- Displays advertised network speed/duplex
- Measures and reports any voltage on lines
- Wiremaps network connections with remote identifiers
- Generates multiple tone levels for signal tracing and cable identification
Warranty: This warranty extends for a period of 12 months for the
test instrument and 3 months for the cables fromthe date of manufacture or proof-of-purchase.
|
 Click here to download the Instruction Manual
Description
The new LanScaper™ Network Tester is the first in a new line of Physical Layer Network Management Devices.
The LanScaper™ combines the functions of a high-end cable tester and length measurement device with the capability to
monitor and correct network problems connected with the physical layer and link conditions of the network.
Package Contents
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| NT700 |
LanScaper network tester |
| $334.71 |  |
|
| Model |
Accessories |
List Price |
Sale Price |
| TP20 |
RJ12 to RJ12 cable for no-fault connection to RJ11 or RJ45 jacks - 7.5" Cable assembly, |
| $2.02 | |
|
| TP50 |
RJ45 to Coax F-connector adapter - without balun for ID only |
| $3.72 | |
|
| TP608 |
Network remote identifiers, set of 7 (#2-#8) for cable testers except LanRoamer and NetRite - Discontinued - replaced by Test-Um TP610 |
| TP609 |
Network remote identifier, replacement #1 for cable testers except LanRoamer and NetRite |
| $16.56 | |
|
Specifications
| Physical Dimensions |
| Size: |
15 x 7.4 x 3.2 cm(5.9 x 2.9 x 1.25 inches) |
| Weight: |
200 grams (7 oz.) With battery |
| Environmental |
| Operating temperature: |
0 to 50ºC (32 to 122ºF) |
| Storage temperature: |
-30 to 80ºC (-20 to 176ºF) |
| Humidity: |
10%to 90%, non-condensing |
| Battery Life |
| (9VAlkaline battery, typical) times are for the full
capacity of the battery used continuously in one of the following modes: |
| Standby: |
2.5 years
|
| Cable Testing: |
50 hours, no backlight
27 hours, 50%backlight
|
| Network Testing: |
15 hours, no backlight
14 hours, 50%backlight
|
| Cable Types |
| Shielded or unshielded, Cat5E, Cat5, Cat4, Cat3 and coax
|
| Minimum cable length for testing for split pairs: |
1 meter (3 feet) |
| Minimum cable length for single-ended cable test: |
1.25 meter (4 feet) |
| Length measurement range (CAT5/6): |
0 to 457 meters (0 to 1500 feet)
|
|
;)
