company logo Tektronix P6247 Differential Probes
     Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.  
 
 
 
Tektronix P6247 Differential Probes



Click image to enlarge


Applications:

  • Communications (Gigabit Ethernet, IEEE-1394, Fibre Channel)
  • Semiconductor Characterization (RAMBUS)
  • Disk Drive Read Channel Design
  • Communication Pulse Shape Compliance
  • Jitter, Cross-Talk, BERT Measurements
  • Location of Ground Bounce
 Features:
  • >1.0 GHz Bandwidth (Guaranteed)
  • Low Input Capacitance: <1 pF Differential
  • Probe Input Connector: Two Standard 0.025 in./0.63 mm (0.1 in. center) Square Pin Receptacle (Female)
  • Electrostatic Discharge Tolerant (IEC 801-2)
  • Connects to TEKPROBE™ BNC Interface on TDS Series Oscilloscopes or Other Instruments Using 1103 TEKPROBE® Power Supply
  • For Use with Oscilloscopes, Spectrum or Network Analyzers
  • >60 dB (1000:1) Common Mode Rejection Ratio (CMRR)
  • Small Probe Head Allows Easy Probing of SMDs


  Description

The P6248, P6247 and P6246 enable users to make time domain or frequency domain measurements on high bandwidth signals commonly found in disk drive, digital IC design (RAMBUS) and communication applications (Gigabit Ethernet, IEEE-1394 Firewire and Fibre Channel). The P6248 includes accessories that allow RAMBUS via probing and IEEE-1394 interconnect access. The small probe head geometry and assorted probe tip accessories allow these probes to easily accommodate manual probing of surface mount devices while maintaining high CMRR.

The P6246, P6247 and P6248 are ideal for design verification of disk drive read channel electronics and timing analysis for troubleshooting ground bounce problems associated with high speed logic. They can also be used for pulse shape or cross talk compliance testing of high speed communication signals.


  Models, Options, & Accessories


Model Description List Price Sale Price
P6247 PROBE,DIFF,ACT; 1GHZ BW,+/- 0.85/8.5V,1PF,TPI - CERTIFICATE OF TRACEABLE CALIBRATION STANDARD $4190.00
$4148.10 
Model Accessories List Price Sale Price
P6247 C3 CALIBRATION SERVICE 3 YRS. PROVIDES TRACEABLE OR FUNCTIONAL VERIFICATION EVENTS WHICHEVER ARE APPLICABLE TO THE PRODUCT. CALS ARE AT TEKTRONIX RECOMMENDED INTERVAL DURING THE COVERAGE PERIOD. CAL COVERAGE INCLUDES THE MANUFACTURERS CAL + 2 $295.00
$292.05 
P6247 C5 CALIBRATION SERVICE 5 YRS. PROVIDES TRACEABLE OR FUNCTIONAL VERIFICATION EVENTS WHICHEVER ARE APPLICABLE TO THE PRODUCT. CALS ARE AT TEKTRONIX RECOMMENDED INTERVAL DURING THE COVERAGE PERIOD. CAL COVERAGE INCLUDES THE MANUFACTURERS CAL + 4 $560.00
$554.40 
P6247 D1 Calibration Data Report $35.00
$34.65 
P6247 D3 Calibration Data Report 3 Years (with Option C3) $65.00
$64.35 
P6247 D5 Calibration Data Report 5 Years (with Option C5) $125.00
$123.75 
P6247 R3 Repair Service 3 Years $435.00
$430.65 
P6247 R5 Repair Service 5 Years $770.00
$762.30 
12007600 Cable Assembly, RF; Coaxial; RFD, 50 Ohm, 20 inch L, BNC Male to BNC Male, Strain Relief Boots - Discontinued - no replacement
13030400 Adapter, Probe Tip; for P6246/P6247 - Discontinued - no replacement
13030504 Please call or email us for pricing and availability.
13030604 Please call or email us for pricing and availability.
15057200 ADAPTER,CONN; SMA Female to BNC Male - Discontinued - no replacement
1103 TEKPROBE IF PS; W/OFFSET 2 CONN - STATEMENT OF COMPLIANCE INCLUDED WITH THIS PRODUCT $1910.00
$1890.90 
P6247-CA1 PROVIDES A SINGLE CALIBRATION EVENT OR COVERAGE FOR THE DESIGNATED CALIBRATION INTERVAL, WHICHEVER COMES FIRST. $155.00
$153.45 
SMG50 ADAPTER KIT; 20 KLIP CHIP ADAPTERS $146.00
$144.54 
SMK4 ADAPTER MICRO-GRABBERS; PROBE ATTACHMENT FOR SMALL GEOMETRY LEADS,4 EACH $129.00
$127.71 

  Specifications


Bandwidth (guaranteed) -
P6248: DC to 1.5 GHz.
P6247: DC to 1.0 GHz.
P6246: DC to 400 MHz.
Rise Time (specified) - <265 ps (P6248), <350 ps (P6247), <875 ps (P6246).
DC Attenuation Accuracy - ±2%.
Common Input Voltage Range - ±7.0 V, 1X; ±7.0 V, 10X.
Differential Input Voltage Range - ±850 mV, 1X; ±8.5 V, 10X.
Max. Nondestruct Input Voltage - ±25 V (DC + peak AC).
Electrostatic Immunity - >15 kV.
TEKPROBE Interface - Probe power, auto-scaling, auto-termination with TDS scopes.
Bandwidth Limit - Switchable, 200 MHz (P6246 & P6247).
DC Reject - 0.4 Hz, 1X; 4.0 Hz, 10X (P6246 & P6247).

Typical Specifications


Input C - <1 pF (differential mode),
<2 pF (common mode).
Input R - 200 kO (differential mode),
100 kO (common mode).
Linearity - ±2%.
Noise - <50 nV/squareroot Hz.
Harmonic Distortion - =1.5% @ 100 MHz.
Passband Ripple - <±0.25 dB.
P6248: DC to 1.5 GHz.
P6247: DC to 850 MHz.
P6246: DC to 400 MHz.
Output Termination - Terminate into 50 O.

Frequency Attenuation Setting P6246 P6247 P6248
1 MHz ÷ 1 >60 dB >60 dB >60 dB
÷ 10 >45 dB >45 dB >45 dB
100 MHz ÷ 1 >38 dB >38 dB >38 dB
÷ 10 >25 dB >25 dB >25 dB
500 Mhz ÷ 1 N/A >35 dB >35 dB
÷ 10 N/A >20 dB >20 dB
1 GHz ÷ 1 N/A >30 dB >30 dB
÷ 10 N/A >18 dB >18 dB
1.5 GHz ÷ 1 N/A N/A >25 dB (typical)
÷ 10 N/A N/A >18 dB (typical)

Physical Characteristics

Weight (probe only) - 160 g (0.36 lb.).
Probe Head Volume - 6 cm3 (0.3 in.3).
Probe Head Input Connection - 0.63 mm (0.025 in.) square pins on 2.54 mm (0.1 in.) centers.
Output Cable Length - 1.2 m (4.0 ft.).

Environmental Characteristics


Temperature -
Operating: 0 °C to 50 °C.
Nonoperating: -55 °C to +75 °C.
Humidity (0 to 90% RH) -
Operating: 30 °C to 50 °C.
Nonoperating: 30 °C to 60 °C.



 

Welcome | Companies | Search by Type | How To Order | Leasing | About Us | Careers
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
 BBBOnline Reliability Seal, Click for confirmation page. Tequipment.NET
Phone: 1-877-571-7901 / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET 		 



Live chat by BoldChat
Need help? We have a staff
of more than 30 people to help you.
Let us show you why over 100,000
customers choose Tequipment.NET