|
Tektronix AWG710B Arbitrary Waveform Generator, 4.2 GS/s
Specifications
Arbitrary Waveform Generator
AWG710B
Characteristics
Arbitrary
Waveforms
Waveform Length - 960 to 32,400,000 points (or 64,800,000
points, option 01) in multiples of four.
Sequence Length - 1
to 8,000 steps.
Sequence Repeat Counter - 1 to 65,536 or infinite.
Run
Modes
Gated mode, Event Jump, and Software Jump are disabled in the
synchronous operation
Continuous - Waveform is iteratively
output. If a sequence is defined, the sequence order and repeat functions
are applied.
Triggered - Waveform is output only once when
an external, internal, GPIB, LAN, or manual trigger is received.
Gated
- Waveform begins output when gate is true and resets to beginning when
false.
Enhanced - Waveform is output as defined by the sequence.
Extended
Operation
Function Generator
Waveform Shape - Sine,
Triangle, Square, Ramp, Pulse, or DC.
Frequency - 1.000 Hz
to 400.0 MHz.
Amplitude -
Range: 0.020 Vp-p to 2 Vp-p into
50 O
Resolution: 1 mV.
Offset -
Range: -0.500 V
to +0.500 V into 50 O
Resolution: 1 mV.
DC Level - DC
waveform only.
Range: -0.500 V to +0.500 V into 50 O
Resolution:
1 mV.
Polarity - Normal, Invert.
Duty Cycle
-
Range: 0.1% to 99.9%, Pulse waveform only.
Resolution:
1.000 Hz
to 4.000 MHz: 0.1% step.
4.001 MHz to 20.00 MHz: 0.5% step.
20.01 MHz
to 40.00 MHz: 1% step.
40.01 MHz to 80.00 MHz: 2% step.
80.01 MHz
to 100.0 MHz: 2.5% step.
100.1 MHz to 160.00 MHz: 4% step.
160.1 MHz
to 200.0 MHz: 5% step.
200.1 MHz to 400.0 MHz: 10% step.
Marker
Out -
Marker1 Pulse Width:
Hi Lo: 20% / 80% of Period.
Marker2
Pulse Width:
Hi/Lo: 50% / 50% of Period, except 100.1 MHz to 160.0 MHz.
Hi/Lo:
52% / 48% of Period, at 100.1 MHz to 160.0 MHz.
Marker Level:
Hi
Level: 1V into 50 O
Lo Level: 0V into 50 O
Waveform
mixing operation - Supports two-signals mixed output digitally.
Synchronous
operation - Supports to synchronize two AWG710B signals output by two
boxes.
NOTE: This operation is executed by Sync master and Sync
slave operation combination.
Sync master operation - Set
one AWG710B as a master box
Sync slave operation - Set another
AWG710B as a slave box
Clock Generator
Sampling
Frequency - 50.000000 kS/s to 4.2000000 GS/s.
Resolution - 8
digits.
Internal Clock - Accuracy: ±1 ppm.
Phase
Noise - (VCO out)
At 4.2GS/s, 10 kHz offset: -65 dBc/Hz.
At 4.2GS/s,
100 kHz offset: -96 dBc/Hz.
Internal Trigger Generator
Internal
Trigger Rate -
Range: 1.0 µs to 10.0 s.
Resolution: 3 digits,
0.1 µs minimum.
Accuracy: ±0.1%.
Main Output
Output
Signal - Complementary; CH1 and channel inverse.
Digital to
Analog Converter -
Resolution: 8-bits.
Differential Non-linearity:
±1/2-LSB.
Integral Non-linearity: ±1-LSB.
Output Connector
- Front Panel SMA.
Normal Out*1
Amplitude
- Into 50 O.
Amplitude Range: 20 mV to 2.0 V peak to peak.
Resolution:
1 mV.
DC Accuracy: ±(2.0% of Amplitude + 2 mV) at offset = 0 V.
Offset
- Into 50 O.
Range of Signal Center: ±0.500V (Rails of -1.5V, +1.5V).
Resolution:
1 mV.
Accuracy: ±1.5% of offset ±10 mV at 20 mV amplitude.
Pulse
response - (-1 and 1 waveform data, 0 V offset, through filter at 1 Vp-p,
clock 1 GS/s) using 20 GHz BW oscilloscope.
Rise time: (10 to 90%): =480 ps.
Fall
time: (10 to 90%): =480 ps.
Aberrations: ±10% (at 1.0 Vp-p amplitude).
Flatness:
±5% (after 20 ns from rise/fall edge).
Sine Wave Characteristics
- (4.2 GS/s clock, 32 waveform points, 131.25 MHz signal frequency, 1.0 V
amplitude, 0 V offset, through filter)
Harmonics: =-40 dBc, DC to 1000 MHz.
Noise:
=-50 dBc, DC to 1000 MHz.
Phase noise: =-85 dBc/Hz at 10 kHz offset.
Filter*1
Type
- 20, 50, 100, 200 MHz Bessel low-pass.
Rise Time (10% to 90%)
- 20 MHz, 17 ns; 50 MHz, 7.0 ns; 100 MHz, 3.7 ns; 200 MHz, 2.0 ns.
Group
Delay - 20 MHz, 18 ns; 50 MHz, 8 ns; 100 MHz, 4.7 ns; 200 MHz, 3 ns.
Direct
D/A Out*1
Amplitude - 20 mVp-p to 1.0 Vp-p
into 50 O.
Resolution - 1 mV.
DC Accuracy - ±(2%
of Amplitude + 2 mV).
Offset - no function.
DC Offset
Accuracy - 0 V ±10 mV at 20 mV amplitude (waveform data = 0).
Pulse
Response (-1 and 1 waveform data, at 0.5 Vp-p) -
Rise Time (10% to
90%): =280 ps.
Fall Time (10% to 90%): =280 ps.
Output
Impedance - 50 O.
*1 Option 02 eliminates the ability
to switch between normal and direct D/A out, as well as filter and offset
control.
Extended Bandwidth Output (Option 02)
Amplitude
- 500 mVp-p to 1.0 Vp-p into 50 O
Resolution - 1 mV.
DC
Accuracy - ±(2.0% of amplitude + 2 mV).
Offset - No function.
DC
Offset Accuracy - 0 V ±10 mV at 500mV Amplitude (waveform data = 0).
Pulse
Response - (-1 and 1 waveform data, at 1.0 Vp-p).
Rise Time
- (10% to 90%): =175 ps.
Fall Time - (10% to 90%): =175 ps.
Output
Impedance - 50 O.
Auxiliary Outputs
Marker
Number
- 2 (complementary).
Level -
High level: -1.00 V to
2.45 V into 50 O to GND.
Low level: -2.00 V to 2.40 V into 50 O to
GND.
Amplitude: 0.05 Vp-p to 1.25 Vp-p max. into 50 O to GND.
Resolution
- 0.05 V.
DC Accuracy - Within ±0.1 V ±5% of setting into
50 O.
Maximum Output current: ±80mA.
Rise/Fall Time (20%
to 80%) - <130 ps into 50 O to GND (1.0 Vp-p, Hi +1.0 V, Lo 0 V).
Period
Jitter (Typical) - by1010 clock pattern
At 4.2 GS/s 2.0 ps rms, 15 ps
peak to peak.
At 2.1 GS/s 2.0 ps rms, 15 ps peak to peak.
At
1.05 GS/s 2.0 ps rms, 15 ps peak to peak.
Cycle-to-Cycle Jitter
(Typical) - by1010 clock pattern.
At 4.2 GS/s 3.4 ps rms, 25 ps peak
to peak.
At 2.1 GS/s 3.4 ps rms, 25 ps peak to peak.
At 1.05 GS/s
3.7 ps rms, 26 ps peak to peak.
Marker Skew - < 20 ps
(typical).
Delay (between analog output and marker output) -
(Marker
Level: 1 Vp-p (Hi + 1V/Lo 0V), Analog Output: At 1 Vp-p)
Normal Output:
2.4 ns (Offset 0 V, Filter = "Through.")
Direct Output: -1 ns.
Connector
- Front-panel SMA.
VCO Out
Amplitude - CML,
AC coupling, 0.4 Vp-p into 50 O to GND.
Impedance: 50 O, AC coupling.
Connector
- Rear-panel SMA.
10 MHz Reference Clock Out
Amplitude
- 1.2 Vp-p into 50 O. Max 2.5 Vp-p open.
Impedance - 50O,
AC coupling.
Connector - Rear-panel BNC.
C Out 1
and 2
For 2 boxes synchronous usage
Connector: SMA, Rear
Output
signal style: Complementary
T Out 1 and 2
For 2 boxes
synchronous usage
Connector: SMA, Rear
Output signal style:
Complementary
Auxiliary Inputs
Trigger In
Trigger
Mode - Minimum Pulse Width: 10 ns, 0.2 V amplitude.
Impedance
- 1 kO or 50 O.
Polarity - POS or NEG.
Connector
- Rear-panel BNC.
Input Voltage Range -
1 kO: ±10 V.
50 O:
±5 V.
Threshold -
Level: -5.0 V to 5.0 V.
Resolution:
0.1 V.
Trigger Mode - Minimum Pulse Width: 10 ns, 0.2 V
amplitude.
Trigger Hold-off -
One box operation: =109.5
clocks + 500 ns.
Two boxes synchronous operation: =109.5 clocks + 700 ns.
Delay
to Analog Out: 275.5 clocks + 17 ns (Normal Output, Filter "Through").
Gate
Mode - (for one box operation)
Minimum Pulse Width (0.2 V amplitude):
1152 clocks + 10 ns.
Gate Hold Off: =1920 clocks + 20 ns.
Delay
to Analog Out: 1355 to 1563.5 clocks + 9 ns (Normal Output, Filter "Through").
Event
Input - (for one box operation)
Number of Events: 7-bits.
Input
Signals: 7 event bits, strobe.
Threshold: TTL level.
Maximum
Input: 0 V to +5 V (DC + peak AC).
Impedance 1 kO, pull-up to +3.3 V.
Connector:
Rear-panel 9-Pin D-sub.
Enhanced Mode -
Minimum Pulse
Width: 320 clocks + 10 ns.
Event Hold Off: = 896 clocks + 20 ns.
Delay
to Analog Out (Jump timing: Async, Output Norm, Filter Through):
Strobe:
ON, 1691.5 clocks + 10 ns.
Strobe: OFF, 1947.5 clocks + 6 ns.
Event
Input to Strobe Input:
Setup Time: 192 clocks + 10 ns.
Hold
Time: 192 clocks + 10 ns.
External Clock IN
Input
Voltage Range - 0.4 Vp-p to 2.0 Vp-p,
Impedance - 50 O,
AC coupled.
Frequency Range - 125 MHz to 4.2 GHz
Note: need
>10mV/ns signal slew rate
Connector - Rear-panel SMA.
Reference
10 MHz Clock IN
Input Voltage Range - 0.2 Vp-p to 3.0 Vp-p,
±10 V maximum.
Impedance - 50 O, AC coupled.
Frequency
Range - 10 MHz ±0.1 MHz.
Connector - Rear-panel BNC.
C
IN
For 2 boxes synchronous usage.
Connector: SMA, Rear.
Input
signal style: Complementary.
T IN
For 2 boxes synchronous
usage.
Connector: SMA, Rear.
Input signal style: Complementary.
General
Characteristics
Display - Color TFT LCD.
Display
Area - Horizontal: 13.06 cm (5.14 in.), Vertical: 9.70 cm (3.81 in.)
Resolution
- 640x480
Data Storage
Internal Hard Disk - =20.0 GB.
Flash
Disk - 256 MB (Option 10).
Floppy Disk - 3.5 inch, 1.44 MB.
Environment
Temperature
-
Operating: 10 °C to +40 °C.
Nonoperating: -20 °C to +60 °C.
Humidity
-
Operating: 20% to 80%.
Nonoperating: 5% to 90%.
Altitude
(Hard Disk Restriction) -
Operating: Up to 3,000 m (10,000 ft).
Nonoperating:
up to 12,000 m (40,000 ft).
Random Vibration -
Operating:
2.65 m/s2rms (0.27 Grms, 5 Hz to 500 Hz, 10 minutes.
Nonoperating:
22.36 m/s2rms (2.28 Grms, 5 Hz to 500 Hz, 10 minutes.
Shock
- Nonoperating: 294 m/s2 (30 G), half-sine, 11 ms duration
(three times each axis, in each direction, 18 total).
EMC Compliance
- EC Council Directive 89/336/EEC (EC-92), AS/NZS2064-1/ 2.
Safety
- UL 61010B-1, CSA C22.2 No. 1010.1, EN61010-1 second edition.
Power
Supply
Rating - 100 to 240 VAC.
Range - 90
to 250 VAC.
Maximum Power and Current - 240 VA and 5 A.
Frequency
- 48 to 63 Hz.
Physical Characteristics
|
Dimensions
|
mm
|
in
|
|
Height
|
193
|
7.6
|
|
With option 11
|
232
|
9.1
|
|
Width
|
434
|
17.1
|
|
Depth
|
508
|
20
|
|
Weight
|
kg
|
lb
|
|
Without package
|
14.1
|
31.1
|
|
With option 11
|
16.1
|
35.7
|
|
With package
|
24.5
|
54
|
|
With option 11
|
27.5
|
61.1
|
Interfaces - GPIB, Ethernet: 10/100Base-T, RJ-45.
PC
Keyboard - 6-Pin mini-DIN, rear.
|
