Our agents are available:
9:00 AM - 6:00 PM EST
Tektronix AWG400 Arbitrary Waveform Generator, 200 M/s
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   
Tektronix AWG400 Arbitrary Waveform Generator, 200 M/s
Product Home: AWG420 | AWG430 | Specifications

  Specifications

Arbitrary Waveform Generators

AWG400 Series

Characteristics


Modulation Standards and Display Types
Modulation Types -
  • BPSK
  • QPSK
  • OQPSK
  • p/4DQPSK
  • 8PSK
  • 16QAM
  • 64QAM
  • 256QAM
  • User defined

Modulation Displays -
  • I(t), Q(t)
  • R(t), f(t)
  • Eye Diagram I
  • Eye Diagram Q
  • Vector Diagram
  • Constellation
  • Magnitude Spectrum
  • Phase Spectrum

Arbitrary Waveforms


Waveform Length - 64 to 4,050,000 points (64 to 16,200,000 points with Opt. 01).
Waveform Segment Length - =64 points, in multiple of 1.
Sequence Steps - 1 to 8,000 steps (All channels operate the same sequence).
Repeat Counter - 1 to 65,536 or infinite.

Function Generator Waveforms


Operation Mode - Continuous mode only.
Waveform Shape - Sine, Triangle, Square, Ramp, Pulse, or DC.
Frequency - 1.000 Hz to 10.00 MHz.
Amplitude (Standard) -
Range: 0.020 Vpp to 2 Vpp into 50 O.
Resolution: 1 mV.
Amplitude (Option 05) -
Range: 0.020 Vpp to 5Vpp into 50 O.
Resolution: 1 mV.
Offset (Standard) -
Range: -1.000 V to +1.000 V into 50 O.
Resolution: 1 mV.
Offset (Option 05) -
Range: -2.500 V to +2.500 V into 50 O.
Resolution: 1 mV.
DC Level (Standard) - DC waveform only.
Range: -1.000 V to +1.000 V into 50 O.
Resolution: 1 mV.
DC Level (Option 05) - DC waveform only.
Range: -2.500 V to +2.500 V into 50 O.
Resolution: 1 mV.
Phase -
Range: -360° to +360°.
Resolution:
1.000 Hz to 20 kHz: 0.036° step.
20.01 kHz to 200 kHz: 0.36° step.
200.1 kHz to 2.000 MHz: 3.6° step.
2.001 MHz to 4.000 MHz: 7.2° step.
4.001 MHz to 5.000 MHz: 9° step.
5.001 MHz to 8.000 MHz: 14.4° step.
8.001 MHz to 10.00 MHz: 18° step.
Polarity - Normal, Invert.
Duty Cycle -
Range: 0.1% to 99.9%, Pulse waveform only.
Resolution:
1.000 Hz to 200 kHz: 0.1% step.
200.1 kHz to 2.000 MHz: 1% step.
2.001 MHz to 4.000 MHz: 2% step.
4.001 MHz to 5.000 MHz: 2.5% step.
5.001 MHz to 8.000 MHz: 4% step.
8.001 MHz to 10.00 MHz: 5% step.
Marker Out -
Marker1 Pulse Width: Hi / Lo: 20% / 80% of Period.
Marker2 Pulse Width:
Hi / Lo: 50% / 50% of Period, except 5.001 MHz to 8.000 MHz.
Hi / Lo: 52% / 48% of Period, at 5.001 MHz to 8.000 MHz.
Marker Level: TTL level.

Clock Generator


Sample Frequency - 10.00000 kS/s to 200.0000 MS/s.
Resolution Accuracy - 7 digits / ±2 ppm (±0.0002%).
Period Jitter (rms) - 7 ps at 200 MHz (typical).
Cycle Jitter (rms) - 12 ps at 200 MHz (typical).

Main Analog Output


Number of Outputs - AWG430 - 3, AWG420 - 2.
Output Style - Complementary (standard), Single-ended (Opt. 05).
Output Connector / Impedance - BNC front panel (50 O).
Vertical Resolution - 16-Bit.
D/A Converter (DNL/INL) - ±3 LSB at 25 °C /±4 LSB at 25 °C.
Skew Time Between Channels - =±100 ps (Relative to Ch1).
Variable Delay (Range/Resolution/Accuracy) - -2.52 ns to +2.52 ns / 70 ps /±70 ps at 25 °C.

Complementary Output


Amplitude / Range - -2.0 V to +2.0 V (into 50 O) / 20 mV to 2.0 Vp-p (into 50 O).
Resolution / DC Accuracy - 1 mV /±(1.5% of setting + 2 mV) (Offset = 0 V).
Step Response (10% - 90%) - (-1 and 1 waveform data, 0 V offset, filter "Through").
Rise Time: =4.0 ns.
Fall Time: =4.0 ns.
Settling Time : ±3% (after 50 ns from rise/fall edges).
Aberration: ±10% (amplitude >1.0 V), ±7% (amplitude =1.0 V).
SFDR - (Signal frequency: 1.0 MHz, amplitude: 1.0 V, offset: 0 V, filter "Through") -74 dB (@ 50 MS/s), -74 dB (@ 100 MS/s), -62 dB (@ 150 MS/s).
Offset
Range/Resolution - -1.00 V to +1.00 V (into 50 O) / 1 mV.
Accuracy - ± (1% of offset + 10 mV)(amplitude = 20 mV, waveform data 0).
Filter
Type - Bessel low pass filter 1 MHz, 5 MHz, 20 MHz, 50 MHz.
Rise Time (10% - 90%) - 350 ns, 70 ns, 18 ns, 7 ns.
Delay From Trigger - 350 ns, 70 ns, 18 ns, 7 ns (group delay).

Direct Output (Standard)


Range / Amplitude - -0.25 V to +0.25 V (into 50 O) / 20 mV to 0.5 V (into 50 O).
Resolution / DC Accuracy / Offset - 1 mV / ± (1.5% of setting + 2 mV) / =10 mV.
Step Response (10% - 90%) - (filter "Through").
Rise / Fall Time: =3.0 ns / =3.0 ns.

Single-ended Output (Option 05)


Range / Amplitude - -5.0 V to +5.0 V (into 50 O) / 20 mV to 5.0 Vp-p (into 50 O).
Resolution / DC Accuracy - 1 mV / ± (1.5% of amplitude + 2 mV) (Offset = 0 V).
Range / Resolution - -2.500 V to +2.500 V (into 50 O) / 1 mV.
Accuracy - ± (1% of offset + 10 mV) (amplitude = 20 mV, waveform data 0).
Step Response (10% - 90%) - (-1 and 1 waveform data, 0 V Offset, Filter "Through").
Rise Time: =5.0 ns.
Fall Time: =5.0 ns.
Settling Time: ±3% (after 50 ns from rise/fall edges).
Aberration: ±10% (amplitude >1.0 V), ±7% (amplitude =1.0 V).
SFDR - (Signal frequency: 1.0 MHz, amplitude: 1.0 Vp-p, offset: 0 V, filter "Through") -72 dB (at 50 MS/s), -70 dB (at 100 MS/s), -60 dB (at 150 MS/s).
Filter
Type - Bessel low pass filter 1 MHz, 5 MHz, 20 MHz, 50 MHz.
Rise Time (10% - 90%) - 350 ns, 70 ns, 18 ns, 7 ns.
Delay From Trigger - 350 ns, 70 ns, 18 ns, 7 ns (Group Delay).

Noise (All channels independent).


Range / Resolution - -130 dBm/Hz to -95 dBm/Hz / 1 dBm/Hz.
Accuracy / Type - ± 2.5 dB at (-95 dBm/Hz to -130 dBm/Hz at 10 MHz) / Gaussian.
Flatness - ±2.5 dB (1 MHz to 100 MHz (at -95 dBm/Hz reference 50 MHz).
Output Connector - Part of analog front panel BNC.

Internal Trigger Generator


Range / Resolution / Accuracy - 1.0 µs to 10.0 s / 3 digits, minimum 0.1µs / ±0.1%.

Auxiliary Outputs


Marker
Maximum Data Rate - 200 Mb/s.
Number of Outputs - AWG430: 6.
AWG420: 4 (2 per channel).
Level / Impedance - Hi: =2.4 V, Lo: =0.1 V (into 50 O) 74LVC54A output driver / 50 O.
Rise / Fall Time (10% - 90%) - 4 ns maximum.
Output Skew - =±100 ps.
Output Connector - BNC rear panel.
Master Clock Out
Level / Impedance - 1 Vp-p (into 50 O) ±0.3 V / 50 O.
Frequency / Output Connector - 100 MHz to 200 MHz / BNC rear panel.
Digital Data (Output from P4116, Option 03).
Number of Outputs - Ch 1 = 16, Ch 1+2 = 32, Ch 1+2+3 = 48. Each channel D0-D15 = 16 Bits + clock.
Output Connector - Each channel 34-Pin (header pin connector), P4116 CMOS Pod.
Maximum Data Rate - 10 kb/s to 100 Mb/s.
Level / Impedance - Hi: =2.3 V, Lo: =0.1 V (into 50 O) 74LVC541A output driver / 50 O.
Rise Time (10% - 90%) - 3 ns Maximum.
Skew Time - 1 ns (typical) (Between clock signals and data).
Data Invalid Time - 4 ns.

10 MHz Reference


Amplitude / Impedance - 1 Vp-pmin (into 50 O), 3 Vp-pmax (into 1 MO) / Impedance: 50 O AC coupled.
Output Connector - BNC rear panel.

Display Monitor


Format / Connector - VGA / D-sub 9-Pin, rear panel.

Auxiliary External Input


Trigger In
Impedance / Polarity - 1 kO or 50 O / positive or negative.
Input Voltage Range / Threshold - 1 kO ±10 V or 50 O ±5 V / -5.0 V to 5.0 V.
Accuracy / Resolution - ± (5% of setting level + 0.1 V) / 0.1 V.
Minimum Pulse Width / Dead Time - 10 ns (0.2 V Amplitude) / =65 clock + 200 ns maximum.
Delay to Analog Out - 50 ns + 1 clock.
Connector - BNC rear panel.
Event In
Number of Events In / Input Signal - 4-Bits / 4 event bits + strobe.
Threshold / Pulse Width - TTL level / =100 ns.
Maximum Input Level / Impedance - 0 V to +5 V (DC + peak AC) / 2.2 kO, pulled-up to +5 V.
Delay to Analog Out - =130 Clock + 400 ns.
Connector - 9-Pin D-sub rear panel.
ADD In
Number of ADD In - Ch1, Ch 2, Ch 3 Independent.
Input Range / Impedance - -1 V to 1 V (DC + peak AC) / 50 O.
Band Width (-3 dB) / Amplitude Accuracy - =50 MHz at 1 Vp-p input / ±5%.
Connector - BNC rear panel.
10 MHz Reference In
Input Range / Impedance - 0.2 Vp-p to 3 Vp-p, maximum ±10 V / 50 O, AC coupled.
Frequency Range / Connector - 10 MHz ± 0.1 MHz / BNC rear panel.
Master Clock In
Sensitive Voltage / Threshold - = 0.4 Vp-p / 0.5 Vdc.
Minimum Pulse Width / Maximum Input Voltage - 2 ns / ± 2 Vdc.
Frequency Range / Impedance - DC to 200 MHz / 50 O.
Connector - BNC rear panel.

Environment / Other


Operation Mode - Continuous, Triggered, Gated, Enhanced.
Display - Color TFT LCD.
Display Area / Resolution - Horizontal: 13.06 cm (5.14 in.), Vertical: 9.70 cm (3.81 in.) / 640x480.

Data Storage


Internal Hard Disk - 10.0 GB.
Flash Disk (Option 10) - 128 MB.
Floppy Disk - 3.5", 1.44 MB.

Environment


Temperature - Operating / Nonoperating: +10 °C to +40 °C / -20 °C to +60 °C.
Humidity - Operating / Nonoperating: 20% to 80% / 5% to 90%.
Altitude - Operating / Nonoperating: Up to 3,000 m (10,000 ft.) / up to 12,000 m (40,000 ft.).
Vibration - Operating / Nonoperating: 0.27 GRMS, 5 Hz to 500 Hz / 2.28 GRMS, 5 Hz to 500 Hz.
Shock - Nonoperating: 294 m/s2 (30 G), half-sine, 11 ms duration (three time each axis).
EMC - EC Council Directive 89 / 336 / EEC (EC-92), AD / NZS 2064.1 / 2.
Safety - UL 3111-1, CSA C22.2 No. 1010.1, EN61010-1, IEC61010-1.

Power Supply


Rating / Range - 100 to 240 VAC / 90 to 250 VAC.
Maximum Power & Current / Frequency - 380 VA / 48 to 63 Hz.
Physical Characteristics

AWG420
Dimensions mm in.
Height 193 7.6
Width 433 17.05
Depth 508 20
Weight kg lb.
Net 14.1 31.1
AWG430
Dimensions mm in.
Height 193 7.6
Width 433 17.05
Depth 508 20
Weight kg lb.
Net 14.4 31.7
With Packaging 22.3 49.12

Interfaces - GPIB, Ethernet: 10/100Base-T, RJ-45.
PC Keyboard - 6-Pin mini-DIN, serial communication port.


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET