Our agents are available:
9:00 AM - 6:00 PM EST
We are experiencing Phone Problems.
However our internet is not affected.
Please use Chat if you cannot reach us by phone.
TPI SDIT 300 Insulation Resistance Tester
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   



TPI SDIT 300 Insulation Resistance Tester



TPI SDIT300
Click image to enlarge

 TPI SDIT300

Features:
  • Large 50,000 count display increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
  • 0-24mA output for process controls
  • Triple Display shows more than one reading simultaneously
  • 51 Segment Analog Bar Graph to catch fast AC fluctuations
  • Back Light (LED Type) allows viewing in any light condition
  • Auto Range automatically selects the best range for the measurement
  • Separate battery and fuse compartment for easy replacement
  • Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
  • Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on.
  • Diode Test displays approximate forward bias voltage
  • Continuity and buzzer to check for opens and shorts
  • Standard Accessories
  • A085: Consists of the A080UL listed silicone test lead set with A150 screw on alligator clips
  • A073: Consists of a six foot lead set with large alligator clips



  Models, Options, & Accessories


Model Description List Price Sale Price
SDIT300 Digital Insulation Resistance Tester $299.95
$269.96 
SAIT25 Analog Insulation Resistance Tester $169.95
$152.96 
SAIT200 Analog Insulation Resistance Tester $249.95
$224.96 
SDIT30 Digital Insulation Resistance Tester $219.95
$197.96 
Model Accessories List Price Sale Price
A085 UL Listed silicone test lead set with alligator clips (screw on) $17.95
$16.87 
A073 6' red and black lead with large alligator clip $9.95
$9.35 



  Specifications

  SDIT 300
Display Digital
Backlight No
Battery Check Low battery indication
Warning Signal Live display on the LCD & beep
Ohm Zero Adjust Yes
Power Supply Battery (1.5V x 8)
Fuse Protected Yes (continuity, insulation)
Category CAT III 600V
Insulation  
Test Voltage 250V/500V/100V
Open Circuit Voltage 250V ± 10%
500V ± 10%
1,000V ± 10%
Measuring Ranges 20MO/200MO/2,000MO
Accuracy 20MO : ±3% of reading
±5 digits
200MO : ±3% of reading
±10 digits
1,000MO : ±3% of reading ±20 digits
2,000MO : ±5% of reading ±40 digits
Continuity  
Measuring Ranges 20O/200O
Open Circuit Voltage DC 4V
Short Circuit Current 200mA DC min in 20O Range
Accuracy ±3% or reading: ±1 digit ±1O
ACV  
Measuring Ranges 200V/600V
Input Frequency 45Hz ~ 450Hz
Accuracy ±3% of reading ±5 digits
Test Voltages 250V/500V/1,000V
Insulation Resistance 100MΩ/200MΩ/400MΩ
AC Voltage No
Continuity 2Ω/20Ω



   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com
BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET