|
TPI SDIT 30 Insulation Resistance Tester
Click image to enlarge
TPI SDIT30 |
|
Features:
- Large 50,000 count display increases resolution and improves accuracy (1.7" x 2.75", 43mm x 70mm)
- 0-24mA output for process controls
- Triple Display shows more than one reading simultaneously
- 51 Segment Analog Bar Graph to catch fast AC fluctuations
- Back Light (LED Type) allows viewing in any light condition
- Auto Range automatically selects the best range for the measurement
- Separate battery and fuse compartment for easy replacement
- Increased safety with Silicone rubber 1,000V CAT III, 600V CAT IV, 10A test leads (CE & cUL listed)
- Auto Power Off DMM will automatically power down after approximately 15 minutes of inactivity to extend battery life. Disable Auto Power Off: Hold down the REC button and turn the meter on.
- Diode Test displays approximate forward bias voltage
- Continuity and buzzer to check for opens and shorts
- Standard Accessories
- A085: Consists of the A080UL listed silicone test lead set with A150 screw on alligator clips
- A073: Consists of a six foot lead set with large alligator clips
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| SDIT30 |
Digital Insulation Resistance Tester |
$219.95 |
| $197.96 |  |
|
| SAIT25 |
Analog Insulation Resistance Tester |
$169.95 |
| $152.96 | |
|
| SAIT200 |
Analog Insulation Resistance Tester |
$249.95 |
| $224.96 | |
|
| SDIT300 |
Digital Insulation Resistance Tester |
$299.95 |
| $269.96 | |
|
| Model |
Accessories |
List Price |
Sale Price |
| A085 |
UL Listed silicone test lead set with alligator clips (screw on) |
$17.95 |
| $16.87 | |
|
| A073 |
6' red and black lead with large alligator clip |
$9.95 |
| $9.35 | |
|
Specifications
| |
SDIT 30 |
| Display |
Digital |
| Backlight |
No |
| Battery Check |
Low battery indication |
| Warning Signal |
Lamp & beep |
| Ohm Zero Adjust |
Yes |
| Power Supply |
Battery (1.5V x 8) |
| Fuse Protected |
No |
| Category |
CAT II 1,000V |
| Insulation |
|
| Test Voltage |
250V/500V/100V |
| Open Circuit Voltage |
250V, 480V, 950V
(approximately) |
| Measuring Ranges |
2,000MO/2,000MO/2,000MO |
| Accuracy |
0 ~ 100MO (250V) : ±1.5% of reading ±3 digits
100 ~ 200MO (250V) : ±2% of reading ±5 digits
200 ~ 1,700MO (250V) : ±3% of reading ±7 digits
1,700 ~ 2,000MO (250V) : ±3% of readint ±8 digits
0 ~ 200MO (500V) : ±1.5% of
reading ±2 digits
200 ~ 1,700MO (500V) : ±3% of
reading ±4 digits
1,700 ~ 2,000MO (500V) : ±4% of
reading ±6 digits
0 ~ 200MO (1,000V) : ±1.5% of
reading ±2 digits
200 ~ 1,700MO (1,000V) : ±3% of
reading ±3 digits
1,700~ 2,000MO (1,000V) : ±4% of
reading ±5 digits |
| Continuity |
|
| Measuring Ranges |
200O |
| Open Circuit Voltage |
DC 170mV (approximately) |
| Short Circuit Current |
24mA (approximately) |
| Accuracy |
±1.5% of reading ±2 digits |
| ACV |
|
| Measuring Ranges |
|
| Input Frequency |
|
| Accuracy |
|
| Test Voltages |
250V/500V/1,000V |
| Insulation Resistance |
100MΩ/200MΩ/400MΩ |
| AC Voltage |
No |
| Continuity |
2Ω/20Ω |
|
;)
