Our agents are available:
9:00 AM - 6:00 PM EST
TPI ADF25C Differential Probe, 100:1 or 400V RMS
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   



TPI ADF25C Differential Probe, 100:1 or 400V RMS




Click image to enlarge

  TPI ADF25C

Specifications:

Bandwidth DC -70 MHz (-3dB)
Accuracy ±2%
Risetime 14nS
Input Impedance 10M/10pf each side to Ground 20M/5pF between inputs
Input Voltage ±700V DC Inc.Pk AC@ 100:1 or 400V RMS
Max. Differential ± 7,000VDC Inc. Pk AC
1,000:1 or 5,000V RMS
Output Voltage ±7V minimum 50KΩ load
Offset (Typical) <± 5mV -10° C to + 40° C
Common Mode ±7,000V DC Inc. Pk AC
or 2,500V RMS
Noise (Typical) 0.9mV RMS
Output Source Impedance 50Ω
Operating Temperature -10°C to + 40°
Power Requirements 4 AA Cell or 6V Main Adapters: DC/600mA or DC/800mA
Power Supply Not Included
Input Leads 60 cm double insulated Rubber terminated in sprung hooks
IEC1010 CATII



  Description

What can you measure with a differential probe?
With 20 MHz bandwidth, a switchable attenuation of 20:1, and 200:1 (part no. ADF25), you can measure high-voltage circuits, motor speed controls, power supply design, and high-power electronic converters.

What comes in the probe set?
You will receive one differential probe, 2 probe tips, and 2 retractable sprung probes for accessing small wires for measurements.

Why is common rejection ratio (CMMR) important for differential probes?
CMMR is a measure of how well a differential probe will reject signals common to both test points, leaving the desired signal to be displayed by the scope.

What does the maximum differential voltage specification tell me?
This specification provides you with the maximum voltage between the inputs the differential probe can be subjected to. This is important because the maximum voltage should never be exceeded.

What is input impedance?
Impedance is a measure of how much a signal will be restricted. In general, it is best to have high resistance and low capacitance to ensure signal quality, accuracy of tests, and to ensure the probe doesn’t load down the circuit under test.

Model Description List Price Sale Price
ADF25C Differential Probe $795.00
$715.50 



   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com
BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET