|
TIF 270T
Automotive Digital Multimeter
Click image to enlarge
TIF 270T
|
|
|
Included Accessories:
(click to enlarge)
RPM Inductive Pickup
|
Test Leads
|
|
Features:
- 50 ms Record- Max, Min, Max-Min, Avg readings
- Frequency with 4 selectable sensitivities
- Inductive RPM readings
- Duty Cycle On/Off ration (%) readings
- Fully auto-ranging
- 4 Digits, 9999 counts up to 5 times the resolution of traditional multimeters
- Audible Continuity for quick open
- Relative Zero Mode
- msFuel Injection Detector for both TBI and PFI systems
- Analog bargraph updates 20 times
- Direct Dwell readings
- Data Hold freezes the displaying reading for later view
- 0.3% High Basic Accuracy
- Relative % change mode
<
li>Auto Power Off to extend battery life
- K-Type Temperature 0C and 0F measurements
- Ohms 999.9 to 40.00 Meg Ohms
- ACV 999.9MV to 600.0V
- DCV 999.9mV to 600.0V
- ACA 4000mA to 10.00A
- DCA 4000mA to 10.00A
- Includes RPM inductive pickup and test leads
|
Description
The TIF270 is a hand held, battery operated professional quality automotive meter for todays complex automotive system diagnostic and troubleshooting.
Measuring Functions Include:
DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Duty Cycle, RPM, Dwell Angle, Tempurature, ms Fuel Injection Detector for both Port Fuel Injector (PFI) and Throttle Body Injection (TBI), Diode Tester, and Continuity Tester.
Pushbutton Functions Include:
Data Hold, Auto or Manual Ranging, Relative Zero Mode, 50ms Record Mode, Trigger Slope Selection, Number of Cylinders Selection, Secondary Functions Selection, as well as RPM for convetional 2 Stroke, 4 Stroke, DIS, or Special 2 Stroke Waste Ignition Engine.
Power On options Include:
Line Filter Frequency 50/60Hz Selection for best noise rejection (normally only available in more expensive bench top instruments).
This Series is housed in a gasket sealed heavy duty casing which keeps out grease, oil, dirt, and moisture to maintain superb accuracy and reliability. Besides the casing is made of high impact thick wall fire resistant material to maximize the durability of the meter, and safety of the user.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| 270T |
Automotive Digital Multimeter - Discontinued - no replacement |
| General Specifications |
| Display |
4 digits 9999 counts LCD |
| Polarity |
Automatic |
| Update Rate |
4 per second nominal |
| Low Battery |
Low battery indicator appears when the battery voltage drops below 7.2VDC |
| Operating Temperature |
0șC to 35șC, 0-80% R.H.; 35șC to 40șC, 0-70% R.H. |
| Storage Temperature |
-20șC to 55șC, 0-80% R.H. (with battery removed) |
| Temperature Coefficient |
nominal 0.15 x (specified accuracy)/șC @ 0șC-18șC or 28șC-40șC |
| Power Supply |
Single 9V battery; NEDA1604, JIS006P, or IEC6F22 |
| APO Timing |
Idle for 4 minutes |
| APO Consumption |
30 ”A Typical |
| Overload Protections |
10A/250V Fast Acting Fuse; 600VDC/VAC rms |
| Safety |
The instrument meets the requirements for double insulation, polution degree 1, to IEC1010-1(1995) |
| Sensing |
Average responding |
| Dimension |
L150mm X W75mm X H34mm (without holster); L160mm X W82mm X H48mm (with holster) |
| Weight |
approx. 252gm (without holster); approx. 345gm (with holster) |
| Power Consumption |
3.5 mA Typical |
| Accessories |
RPM inductive pickup, Test leads (pair), battery installed, and user's manual |
| Special Features |
Autoranging Record (Max,Min,Max-Min,Avg),Autoranging Relative (Zero), ±Trigger slope, and Data Hold |
|
;)
;)
;)