HL 2010 E Intellitemp Heat Gun With LCD Temperature Display Automotive Kit
Automotive Heat Gun Kit. This kit is designed for the repair of plastics, windshields, seats and other bodyshop work.
HL 2010 E Heat Gunis micro processor controlled and features an LCD display which enables temperature selection in 10°F increments. Exclusive DuraTherm™ heating element ensure seven heat and product longevity.
The tool is switched ON and OFF at the three-stage switch on the back of the grip handle. In addition to three stage speed/airflow control, temperature can be continuously adjusted over a range of 120 °–1150 °F by the pushbuttons. The target temperature can be increased in 10 °F steps by pressing the ”+” side of the temperature pushbutton or reduced by pressing the ”–” side of the temperature pushbutton. Pressing the button briefly increases or reduces the target temperature by one 10 °F step. Keeping the button pressed will continue to increase or reduce the temperature in steps of 10 °F until the button is released or the minimum or maximum temperature is set. Blower stage 1 delivers a temperature of 120 °F. The tool will take a short while to cool to 120 °F after switching down to blower stage 1 when it has been operating at high temperatures on blower stage 2 or 3. While the tool is cooling down, the LCD display shows the actual temperature at the nozzle outlet. After switching OFF, the tool stays in the last setting. The outlet protection tube can be removed in order to install the overhead security hanger.