|
Simpson 3343AIXA Percent Motor Load Rugged Seal Meter Relay
Click image to enlarge
|
|
Features:
- Provides Visual Monitoring of Load Conditions of AC Current
Motors
- Built-in Adjustable Time Delay (Delays up to 20 Seconds Available
on Special Order)
- Calibration Not Affected by Steel Panel Mounting
- Rugged Metal Case for Rigorous Environments
- Commercially-Sealed, Moisture and Dust Proof
- Amplifier Input
|
Description
| The Simpson Motor Load Meter Relay has
been designed to provide visual monitoring of motor load current,
in addition to the control action at one or two set points. The
controller measures the AC current of a motor and indicates the
value on a 0-150% dial. The 100% point is adjusted by means of a
gain adjust potentiometer on the rear terminal block, to agree with
the 100% nominal rated load current for the motor. To prevent motor
shut down during start up or momentary transients where the motor
current exceeds the established set point, a time delay of five
seconds is provided. Delays of less than five seconds may be programmed
using external resistors. Delays up to 20 seconds are available
on special order. Specifically designed for harsh environments,
the Model 3300 series is housed in a metal case that gives complete
magnetic isolation for steel panel mounting. This commercially-sealed
meter relay is moisture and dust proof and recommended for use in
wash-down areas. The combined features of time delay, gain adjust,
and auto/manual reset provide complete relay switching for alarm,
motor shut down or other corrective action. |
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| 21684 |
3344AIXA-0-10 ACV 4.5 SSP |
$436.65 |
| $414.82 |  |
|
| 21683 |
3344AIXA-0-5 ACA 4.5 SSP |
$470.25 |
| $446.74 | |
|
| 35096 |
3343 0-5 ACA 3.5 SSP |
$463.35 |
| $440.18 | |
|
| 35097 |
3343 0-5 ACA 3.5 DSP |
$551.70 |
| $524.12 | |
|
Ordering Options
Specifications
| Accuracy |
±3% full scale (F.S.) |
| Movement |
Annular, self-shielding |
| Suspension |
Pivot and jewel |
| Tracking |
±3% |
| Repeatability |
Within 0.5% F.S. |
| Shielding |
Calibration is unaffected by magnetic panel mounting. |
| Response Time |
1.5 seconds maximum above 10mA |
| Overload (1 sec.) |
10 times F.S. |
| Overload (Continuous) |
1.5 times F.S. |
| Dial |
Sharp clear scale. Each dial arc is calibrated to track the specific type of movement used. |
| Case |
Sealed metal, plastic window |
| Resistance |
±15% |
| Pointer |
Black, knife-edge |
| Scale Length |
4.05" (103.0mm) |
| Net Weight |
17oz (0.48kg) |
| Control Point(s) Adjustments |
Single, high limit, 0-100% of arc; double, low limit 0-95% arc; high limit 5-100% of arc Adjustable to within 4° of each other |
| Switching |
Within 1% of indication |
| Differential |
“On,” “Off” difference is within 0.5% of F.S. |
| Auto/Manual Reset |
Latching function can be enabled independently for each relay by removing jumpers on terminal block. |
| Contacts/Output |
Single Set Point--One DPDT relay for Hi set point |
| Relay |
Double Set Point--SPDT relay for Lo set point DPDT relay for Hi set point, Each set of contacts rated at 5 amps, 115 VAC. |
| Frequency Response |
50-1000Hz |
| Power |
108-132 VAC, 50-400Hz |
| Operating Temperature |
41ºF to 122ºF (+5°C to +50°C) |
| Circuit-to-Ground Voltage |
250V ms maximum |
|
;)
