|
Simpson 3324AIXA DC Voltage Rugged Seal Meter Relay
Click image to enlarge
|
|
Features:
- Wide Variety of Control, Alarm, and Limit Uses
- Calibration Not Affected by Steel Panel Mounting
- Rugged Metal Case for Rigorous Environments
- Two sizes: 3-1/2" and 4-1/2"
- Commercially-Sealed, Moisture and Dust Proof
- Amplifier Input
|
Description
| The 3300 Series meter relays offer a wide
variety of applications in control, alarm, and limit use. Photo
conductor sensing eliminates all interference with the indicating
meter. These relays incorporate an amplifier input which drives
a rugged high-torque pivot and jewel meter. Metal-cased "Rugged
Seal" construction withstands rigorous environmental conditions.
The die cast metal case with a drawn steel plated rear case gives
complete magnetic isolation for steel panel mounting. In addition,
each controller is moisture, dust, and dirt proof for use in wash-down
areas. Failsafe circuitry opens output relays in the event of power
failure. Two different sizes, 3-1/2" and 4-1/2", are available
in both single and dual set point models. High-gain transistor switch
circuitry provides accurate switching with a "dead band"
of no more than 0.5% of full scale (F.S.). All DC voltage units
offer ±2% of F.S. accuracy. This style meter is ideal for
many other electrical functions. |
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| 21670 |
3324AIXA 0-50 DCMV 4.5 SSP |
$404.70 |
| $384.47 |  |
|
| 21671 |
3324AIXA 0-1 DCV 4.5 SSP |
$399.30 |
| $379.34 | |
|
| 21672 |
3324AIXA 0-50 DCV 4.5 SSP |
$399.30 |
| $379.34 | |
|
| 21630 |
3324AIXA 0-50 DCMV 4.5 DSP |
$510.75 |
| $485.21 | |
|
| 21631 |
3324AIXA 0-1 DCV 4.5 DSP |
$510.75 |
| $485.21 | |
|
| 21632 |
3324AIXA 0-50 DCV 4.5 DSP |
$508.80 |
| $483.36 | |
|
Ordering Options
Specifications
| Accuracy |
±2% F.S. |
| Movement |
Annular, self-shielding |
| Suspension |
Pivot and jewel |
| Adjustments |
Single, 0-100% of arc; double, low limit 0-95% of arc; high limit, 5-100% of arc, Adjustable to within 4º of each other |
| Switching |
Within 1% of indication |
| Differential |
“On”, “Off” difference is within 0.5% of F.S. |
| Auto/Manual Reset |
Latching function can be enabled independently for each relay by removing jumpers on terminal block. |
| Contacts/Output Relays |
DPDT relay contacts for each control point except motor load types. SPDT low point. Each set of contacts rated at 5 amps, 115 VAC. |
| Repeatability |
Within 0.5% F.S. |
| Frequency Response |
50-1000 Hz |
| Power |
108-132 VAC, 50-400 Hz |
| Operating Temperature |
+41ºF to +122ºF (+5ºC to +50ºC ) |
| Circuit-to-Ground Voltage |
250 RMS maximum |
| Case |
Sealed metal, plastic window |
| Shielding |
Calibration is unaffected by magnetic panel mounting. |
| Response Time |
1.5 seconds maximum |
| Overload (1 sec.) |
10 times F.S. |
| Overload (Continuous) |
1.5 times F.S. |
| Repeatability |
2% |
| Dial |
Sharp clear scale. Each dial arc is calibrated to track the specific type of movement used. |
| Resistance |
±15% |
| Tracking |
±3% |
|
;)
