|
Shimpo DT-315AEB Stroboscope with External Battery Pack
Click image to enlarge
Shimpo DT-315AEB
|
|
Features:
- External Battery Pack Included
- Micro processor controlled
- Extruded aluminum construction
- High polish and focused reflector eliminates “blind” viewing areas
- External trigger allows unit to be automatically synchronized with equipment
- Continuous duty cycle eliminates need to shut down for cooling
- Phase shift allows visual analysis of rotating/reciprocating objects
- High accuracy ( ±0.01% of reading ) is ideal for QC inspection and process control
- Synchronous output enables strobe to drive other strobes
|
Description
|
A truly portable unit, the DT-315AEB operates independent of line power via an exterior battery pack that can be carried with a convenient shoulder harness or set down to allow the operator full movement for visual inspection. When fully charged, rechargeable batteries power the strobe for approximately four continuous hours. The DT-315AEB also incorporates the same impressive features as our DT-311A and DT-315A strobes. One year warranty.
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| DT-315AEB |
Stroboscope, Battery Powered (External), 115 VAC Charger |
$695.00 |
| $653.30 |  |
|
| DT-315A |
Stroboscope, Battery Powered (Internal), 115 VAC Fast Charger |
$715.00 |
| $672.10 | |
|
Specifications
| INTERNAL MODE |
| Flashing Range |
40.0 - 35,000 FPM (flashes per minute) |
| Accuracy |
±0.01 % of reading |
| Resolution |
0.1 FPM, 40.0 - 5,000 FPM 0.2 FPM, 5,000 - 8,000 FPM 0.5 FPM, 8,000 - 10,000 FPM 1 FPM, 10,000 - 35,000 FPM |
| Phase Shift |
Use +/- push buttons (360° in 6 seconds) |
| Display Update Time |
0.2 seconds approx. |
| Output Signal |
Synchronous, 400 µsec. Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance |
| Rate Multiplier/Divider |
Multiply by 2, divide by 2 |
| EXTERNAL MODE |
| Flashing Range |
0.0 to 35,000 FPM |
| Accuracy |
±0.01 % ±1 digit |
| Phase Shift |
0 to 359° with 1° resolution |
| Display Update Time |
0 to 2,000 µsec from 40 - 10,000 FPM |
| External Trigger Input Signal level |
0 -0.8 VDC, HI level : 2.5 - 12 VDC or open collector (NPN), pulse width 50 µsec min. |
| Input Impedance |
4.7 KΩ to 12 V / 6.8 KΩ to 0 V |
| GENERAL |
| Display |
5 digits, 0.4" (10 mm) high, LED |
| Flash Tube Power/Life |
Xenon, 10 W max. (100 million flashes) |
| Flash Duration |
10 - 40 µsec |
| Sensor Power Supply |
12 VDC (40 mA) |
| Low Battery Indicator |
Display shows all L’s |
| Power Requirement |
External battery pack (9.8 - 14.5 VDC, 2.3A) |
| Operating Temperature Range |
32° - 104° F ( 0 - 40° C ) |
| Weight |
4.4 lb (2 kg) |
| Dimensions |
9.84" L x 4.72" W x 4.72" H (250 mm x 120 mm x 120 mm) |
| Warranty |
1 year |
| Standard Accessories |
External Battery pack with charger |
| OPTIONAL ACCESSORIES |
Carrying case, sensors |
|
;)
