Our agents are available:
9:00 AM - 6:00 PM EST
Ramsey PM50WT
Power Meter With Dummy Load
   Search: HACKER SAFE certified sites prevent over 99.9% of hacker crime.
   
   
   

Ramsey PM50WT
Power Meter With Dummy Load



Click image to enlarge

Ramsey Electronics PM50WT

Features:
  • Broadband: PM50 10 kHz to 450 MHz ± 0.5dB, 10kHz to 500 MHz ± -2dB; PM10DC: 50 kHz to 250 MHz ± 1.5dB
  • High dynamic range: better than 77dB!!
  • Power Handling: up to 50 Watts continuous maximum; PM10DC low insertion loss, less than 0.1dB
  • Readings auto-range and are displayed in Watts/dBm/etc
  • Can accurately measure signals from –30dBm to +47dBm, that’s <10 microwatts to 50 Watts!
  • Easy to read LCD display with powerful microprocessor. Display reads from –30dBm (1uW) to +47dBm (50Watts).
  • Peak hold function accurately shows peak power.
  • Press a button and have automatic conversion between dBm and Watts. Display auto-scales all readings.
  • Low battery indication and voltage monitoring.
  • Runs from 7-15V AC or DC or 9VDC battery. Use our AC1 wall adapter for long operation.
  • LED indicators clearly show current auto-ranging power scale.


  Description

Ramsey PM50WT Power Meter With Dummy Load
The PM line of digital power meters is what every RF lab technician or micro-broadcaster needs on his workbench. Until now, power meters of this capability cost thousands! Imagine being able to accurately measure RF power from almost any signal source - and with the PM10, be able to tune and match antennas! Once you use one, you will wonder how you ever did without it! And if you are a micro-broadcaster, the PM10DC will allow you to squeeze every drop of signal out of your transmitter into a perfectly matched antenna for maximum range!

The PM50 includes a 50 watt, 50 ohm dummy load allowing you to tune your transmitter off air without causing interference. An intelligent speed controlled fan adjusts cooling of the load according to power measured! Extremely wide power range allows continuous measurement from an amazing 1µWatts to 50Watts, all without any manual range switching or setting - that s over 77dB! And accuracy is an astounding ± 0.5dB over the entire specified frequency range!

A powerful processor calculates and displays forward and reverse power, VSWR, dB of directionality, AM percent modulation, peak power, and average power. Try doing that with any other power meter for less than a thousand bucks! So what meter do you need?
Use the PM50 if you need to test transmitters off-air or into a good 50 ohm dummy load. And the PM10DC is just the ticket for tuning antennas and checking your entire transmitting system. Both units include the matching case & knob set and power adapter. Case size 5"w x 1 ½"h x 5 ¼"d.


  Models, Options, & Accessories


Model Description List Price Sale Price
PM50WT Power Meter/Dummy Load 1Uw To 50 W
$154.95 


   
  Welcome | Companies | Search by Type | How To Order | Leasing | About Us  
  Tequipment.NET
205 Westwood Ave
Long Branch, NJ 07740
For our Electronic Whiteboard division visit www.touchboards.com 		BBBOnline Reliability Seal. Tequipment.NET
Phone: 1-877-742-TEST (8378) / 732-222-7077
Fax: (732) 222-7088
E-mail: salesteam@Tequipment.NET