Protek P-2560
60Mhz 3-Channel Analog Oscilloscope

Click image to enlarge   Protek P-2560

60MHz Bandwidth Dual time base. 1mV/Division sensitivity. Sweep speeds to 2ns/Division. Six vertical display modes: CH 1, CH 2, Alt/chop, Add, Subtract, Trigger View. Up to 8 simultaneous traces may be displayed. Vertical mode triggering for displaying unrelated signals. 14kV Acceleration Voltage for bright displays of low duty cycle signals. Auto linear focusing. Trigger level lock circuit for stable triggering on large duty cycle and video signals. CH 1 output, single sweep and much more.

Model Description List Price Sale Price Protek P-2560 60Mhz Analog Oscilloscope - Discontinued suggested replacement: Protek 6510      Click here to download the P-2560 Data Sheet (PDF, 59kB) Specifications: Vertical Amplifier: Channel 1 and 2 Sensitivity: 5mV/Div to 5V/Div. in 10 Steps (1-2-5 seq); X5 Mag: 1mV/Div to 1V/Div. Accuracy: ±3%, (5% in X5 Mag) CH 3 Sensitivity: 0.1V/Div. or 1V/Div. Bandwidth (-3dB): 60MHz (X5 Mag: 12MHz) Rise Time: 5.8mS: (X5 Mag: <23nS) Input Impedance: 1MΩ ±2% + 25pF ±3pF Input Coupling: AC-Gnd-DC Invert Channel: CH 2 Display Modes: CH 1, CH 2, CH 3, Add, Subtract, Alt/chop Max Input Voltage: CH 1 & CH 2 400V (DC or AC peak), CH 3 100V (DC or AC peak) Channel 1 Signal Output: 50 mV into 50Ω CMRR: <50:1 for a 50kHz sine wave Horizontal Sweep Timebase A Sweep Time: 20nS/Div to 0.5S/Div in 23 steps (1-2-5 seq.)., X10 Mag: 2nS/Div to 50mS/div. Accuracy: ±3%, (±5% in X10 Mag.) Hold Off: Continuously adjustable to >2X sweep time Timebase B Sweep Time: 20nS/Div to 50mS/Div in 20 steps (1-2-5 seq.); X10 Mag: 2nS/Div to 5mS/Div. Accuracy: ±3% Delay Time: Variable from 0.2µS to 5S Display Modes: A,B,Alt,B Trig’d, XY Sweep Modes: Auto, Norm. and Single Sweep Magnifier (A & B Sweep): X10 ±5% (.02µs to 0.5s); ±8% (0.2µs to 0.1s) Horizontal Amplifier Linearity: ±3%, (±5% in X10 Mag.) X-Y Mode: (CH 1-X axis, CH 2-Y axis) Sensitivity: Same as CH 1 Vertical Amplifier Bandwidth (-3dB): DC to 2MHz Triggering Source: CH 1, CH 2 Alt (V Mode), Line, Ext (CH 3), Ext (CH 3) ÷10 Coupling: AC, AC-LF, TV-H TV-V, DC Slope: Positive or Negative Trigger Sensitivity: Int: DC to 10MHz: 0.4 Div, 10MHz to 60 MHz: 1.5 Div. Ext: DC to 5 MHz: 40mV P-P, 5MHz to 60MHz: 0.8V P-P AC-LF Band-Pass Approx. 10Hz to 50kHz TV: Int: 2 Div, Ext. 0.2V PP External Trigger Input: Input Impedance: 1 MΩ + 20pF; Max. Input Volts: 100V (DC or AC peak) Z-Axis Modulation Sensitivity: 3V P-P (Intensity increases with a negative going input) Bandwidth (-3dB): DC to 5MHz Input Impedance: Approx. 5KΩ Maximum Input Voltage: 50V (DC or AC peak) Calibration Signal 1V P-P 1kHz Square Wave CRT Type: 6" rectangular CRT with illuminated internal 8X10 Div graticule. (1 Div. = 1cm.) Acceleration Voltage: 14kV General Specifications Power Requirements: AC Input voltage 100V, 120V, 220V, 240V ± 10% selectable Power Consumption: 40 Watts 50/60 Hz Dimensions: 5.75" H × 14.125" W × 15.125" L 146mm × 360mm × 384mm Weight: Approx. 26 lbs. Supplied Accessories: Supplied Accessories: AC Power cord, 2 Probes (X10), Spare fuse and Operation manual.

---