Click Image to Enlarge Protek G5100

0.1 to 15MHz frequency range Low Distortion (< 1%) Direct Digital Synthesis for high stability All functions are selected and stored via front panel Sweep time to 10 sec 7 setups may be stored in memory and recalled later All functions controllable by the RS-232 or optional GPIB interface May be operated at line voltages from 85V to 270V without internal changes or switching

Frequency Characteristics

Frequency Range 1Hz to 15MHz Resolution 4D Accuracy 0.5% + 1D

Output Characteristics

Waveforms Sine, Square Pulse, Triangle and Ramp Impedance 50W Attenuator 2dB fixed and 20dB variable Amplitude 0 to ± 20 Volts P-P into an open circuit DC Offset 0 to ± 7.5V into an open circuit TLL Output Level <0.4V (low) to >2.4V (high) Rise and Fall Time <15nS Drive Up to 20TTL/CMOS inputs

Sine Wave

Frequency Range 0.1Hz to 15MHz Harmonic Distortion < 1% from 0.01Hz to 100kHz Symmetry 10% to 90%

Square Wave

Frequency Range 1Hz to 15MHz Rise/Fall Time > 15nS Symmetry 10% to 90%

Pulse

Frequency Range 1Hz to 15MHz Rise/Fall Time < 15nS Duty Cycle Adjustable with symmetry control for 1:10 to 10:1 in a scale from 000.0 to 99.9

Ramp and Triangle

Frequency Range 0.1Hz to 100kHz Linearity > 99%

Internal Sweep

Sweep Period 0.05S to 9.95S Sweep Range 1:1 to 10:1 External Sweep External Sweep is through the VCF input

VCF Input

Input Volts ± 5V DC (max sweep is at + 5V DC) Accuracy ± 1% Input Impedance Approx. 1KW

Software

Software The supplied software is a Windows®-based program, which runs under Windows 95, 98,2000 and ME. It allows the user to set the Instrument Parameters from the PC via the RS-232 interface. Optional GPIB software is also available.

General Specifications

Interface GPIB (Optional) RS-232C: Connector: 9 pin DIN Baud Rates: 1200, 2400, 4800 or 9600 Display 128 x 64 pixel super twist LCD Operating Temperature 0 to 50° C (32° to 120° F) DIMensions 12? W × 11? D × 3.25? D Weight 4.4 lbs AC Line Voltage 85V to 270V AC Frequency: 48 to 66 Hz Supplied Accessories Manual, Line cord, BNC cable, Spare fuse, RS-232 cable and Software disk.