| Frequency Characteristics |
| Frequency Range |
0.01Hz to 10MHz |
| Output Characteristics |
| Waveforms |
Sine, Square Pulse, Triangle and ramp |
| Impedance |
50W |
| Attenuator |
20dB, 40 dB, 60dB and 20 dB variable |
| Amplitude |
0 to ±10 Volts in to an open circuit |
| DC Offset |
0 to ±10 V in to an open circuit (0 to ±5 into 50W) |
| Sine Wave |
| Frequency Range |
0.01Hz to 10MHz |
| Flatness |
±3.5% from 0.01Hz to 100KHz
±10% 100KHz to 10MHz |
| Harmonic Distortion |
< 0.5 % from 10 Hz to 40KHz |
| Symmetry |
20:80 to 80:20 |
| Square Wave |
| Frequency Range |
0.01Hz to 10MHz |
| Rise/Fall Time |
< 25ns into 50W |
| Pulse |
| Frequency Range |
0.01Hz to 10MHz |
| Rise Time |
< 10ns |
| Duty Cycle |
Adjustable symmetry control from 20:80 to 80:20 |
| Ramp and Triangle |
| Linearity |
> 99% |
| Operating Modes |
| Modes |
CW, Triggered, Gated, Burst Sweep |
| Trigger/Gate Input Level |
TTL |
| Trigger/Gate Frequency Range |
DC to 100KHz |
| Burst Time |
1ms to 10s |
| Sweep |
| Type |
Linear and Log |
| Sweep Time |
1ms to 2s in 2 ranges, continuously variable |
| Sweep Width |
1:100 continuously variable. Sweep start frequency may be set with the SET/MOD control. |
| Modulation (AM) |
| Input |
External Through the MOD input connector |
| Frequency |
DC to 1MHz |
| Modulation Range |
0 to 100% |
| Modulation Voltage |
0 to 5V P-P |
| Modulation (FM) |
| Input |
External through the VCG input |
| Tuning Range |
1000:1 with an input of 0 to -5V |
| Outputs |
| Sync |
TTL level |
| GCV |
Output proportional to the selected frequency, 0 to -5V |
| Sweep |
0 to -5V |
| Sweep/Burst Gate |
TTL level |
| General Specifications |
| Operating Temperature |
0 to 50°C (32 to 120°F) |
| Size |
4.3" (H) x 12.5" (W) x 14" (D) |
| Weight |
15 lbs |
| AC Line Voltage |
120/220V, 50/60Hz |
| Accessories |
Manual, line cord, BNC cable |
;)
