Click Image to Enlarge Protek B810

Wide (0.01HZ to 10MHz) Frequency Range Burst and Triggered mode Sweep start/stop capability Six digit LED frequency readout Log. or Lin. sweep Built-in 10MHz frequency counter External FM with the VCG input Output can be amplitude modulated

Download Data Sheet

Output Characteristics

Frequency Range 0.01Hz to 10MHz in 9 ranges Output Level ±10 Volts into 50W Waveforms Sine, Square, Ramp, Pulse Attenuator 20dB, 40dB, 60dB & 20dB variable Impedance 50W DC Offset ±5V in to 50W

Sine Wave

Flatness ±0.2dB: 0.01Hz to 100kHz Distortion 0.50%

Triangle Wave

Linearity > 99%

Square Wave

Rise/Fall Time £ 25ns (into 50W)

Pulse

Duty Cycles 20:80 to 80:20 may be obtained

Operating Modes

Modes CW, Triggered, gated, burst, sweep Trigger/Gate Input Level TTL Burst Time 1ms to 10s Trigger/Gate Freq. Range 0.1Hz to1MHz

Sweep

Types Linear and Log Sweep Time 1ms to 10s Sweep Width Variable to 100:1 Start Freq 0.01Hz to 10MHz

AM Modulation

Type Internal Modulation Level 0 to 100% Modulation Voltage 0 to 5V Modulation Frequency DC to 1MHz

FM Modulation

Type External Tuning Range 1000:1 with an input voltage of 0 to -5V (VCG)

Frequency Counter

Measuring Range 1Hz to 10MHz Gate Time 0.01s, 0.1s, 1s, 10s Accuracy ±0.01% Sensitivity 50mV RMS Max Input V 250V DC and AC RMS Input Impedance 1MW

General Specifications

Power Requirements AC Line Voltage: 100/120/220/240V ±10% Frequency: 48Hz to 66Hz Power Consumption 9VA Operating Temperature 0 to 50°C Size 3.8" H × 11.5" W × 12.5" D; Weight: 8 lbs. Supplied Accessories Manual, Line cord, BNC cable