Click Image to Enlarge Protek B803

Seven frequency ranges with 100:1 control on each range Less than 2% sinewave distortion Variable symmetry DC offset and Voltage Controlled Frequency input TTL sync output

Download Data Sheet

Output Characteristics

Waveforms Sine, Square, Triangle, Pulse, Ramp Frequency Range 0.02Hz to 2MHz in 7 ranges Tuning Range 100:1 on each range Frequency Accuracy B801: 5% of FS B803: ± (0.01% +1D) Frequency Stability 0.1% after 20 minutes Amplitude 2V to 20V P-P open circuit DC Offset Variable from < -10V to > +10V open circuit Output Impedance 50W ±5% Variable Symmetry 1:1 to 4:1 Output Attenuation 0 to 40dB (20dB ±1dB step and 0 to 20dB variable) VCF Input 100:1 tuning range with an input voltage level from 0 to -10V

Sine Wave

Distortion < 2% from 10Hz to 100kHz Amplitude Flatness £ 0.3dB

Square Wave

Rise/Fall Time < 100ns at max amplitude

Triangle Wave

Linearity > 98% to 100kHz

Sweep Characteristics

Sweep Mode Linear Sweep Time Variable from 20ms to 2s Sweep Width Variable from 10:1 to 1000:1

Frequency Counter (B803)

Modes Internal and External Display 4 digit red LEDS Measuring Range 10Hz to 2MHz. Accuracy ±0.01% ± 1 count Sensitivity 50mV RMS Max Input V 140V P-P Input Impedance 1MW

General Specifications

Power Requirements AC Line Voltage: 100/120/220/240V ±10% Frequency: 48Hz to 66Hz Power Consumption Approx. 5VA Operating Temperature 0 to 50°C Size 3.3" H × 8.8" W × 10.1" D Weight 8 lbs. Supplied Accessories Manual, Line cord, BNC cable