| Waveforms |
Sine, Square, Triangle, Ramp Noise, Sin (X)/x, Exp Up, Exp down and Pulse |
| Frequency Range |
| Sine |
1µHz to 10MHz |
| Square |
1µHz to 5MHz |
| Ramp and Triangle |
1µHz to 1MHz |
| Stability |
Long term 50ppm, Short term: 1ppm |
| Resolution |
0.1µHz or 8 digits |
| Accuracy |
0.4Hz(>3.1KHz)
.1µHz(<100mHz) |
| Waveform Characteristics |
| Sine Wave |
| Harmonic distortion |
<20KHz: -54dBc(0.20%)
20 KHz to 1MHz: -48dBC (0.4%)
1 MHz to 10MHz: -40dBc(1.0%)
10MHz to 20MHz: -22dBc(2.5%) |
| Square Wave |
| Rise/Fall Time |
<10nS (1Volt p-p in to 50W) |
| Asymmetry |
<1%+20nS |
| Pulse |
Duty cycle : 0.1% to 99.9% (<10KHz)
1% to 99%(<100KHz)
3% to 97% (<1MHz) |
| Rise/Fall time |
<15nS |
| Ramp and Triangle |
| Linearity |
<0.1% (1KHz) |
| Outputs |
| Main output |
| Output Impedance |
50W |
| Amplitude |
Open circuit:2mV to 20V p-p (≤ 20MHz)
2mV to 6V p-p (40MHz) |
| Amplitude |
50W load 1mV to 10V p-p (≤ 20 MHz)
1mV to 3V p-p (40MHz) |
| Resolution |
8 bits |
| Amplitude Flatness |
5% |
| DC Offset range |
-100% to +100% of Peak Value |
| Output B |
| Waveforms |
All internal waveforms |
| Amplitude |
200mV to 20V p-p |
| Frequency Range |
0.1Hz to 20KHz |
| Output Impedance |
600W |
| Sync Output |
Active for all wave forms and functions except Sine and Square waves |
| Output Level |
TTL |
| Sweep |
| Sweep modes |
Lin and Log |
| Sweep width |
From 1Hz to max waveform freq. |
| Sweep Speed |
10mS to 10s |
| Sweep Trigger |
Internal, External, and Single |
| FSK, PSK, ASK Modulation |
| Carrier |
All internal waveforms |
| Internal Rate |
9mHz to 50KHz |
| Frequency Range |
1Hz to the maximum frequency |
| Burst |
| Waveforms |
All internal waveforms |
| Number of cycles |
1 to 65,535 |
| Phase Range |
-360º to +360º |
| Amplitude Modulation [Internal] |
| Modulation depth |
0 to 100% |
| Carrier Frequency |
1Hz to the maximum waveform frequency |
| Carrier Waveforms |
Internal waveforms, Except Square wave |
| Modulation Waveforms |
Internal waveforms |
| Modulaton Frequency |
10mHz to 20KHz |
| External Amplitude Modulation |
| Input Impedance |
100KW |
| Modulation depth |
a 0.4V p-p signal would 100% modulate a 1v p-p Sine wave |
| Frequency Modulation |
| Carrier Waveforms |
All internal waveforms |
| Carrier Frequency |
1.0Hz to the maximum waveform frequency |
| Modulation Waveforms |
All internal waveforms |
| Modulation Frequency |
100mHz to 10KHz |
| Deviation |
0.1Hz to the maximum waveform frequency |
| Phase Modulation |
| Carrier Waveforms |
Sine, Square |
| Carrier Frequency: Sine wave |
1µHz to the maximum Sine wave frequency |
| Carrier Frequency: Square wave |
1Hz to the maximum Square wave frequency |
| Modulation Waveforms |
All internal waveforms |
| Modulation Frequency |
100mHz to 10KHz |
| Maximum Phase Shift |
360º |
| Frequency Counter |
| Frequency Range |
1Hz to 100MHz |
| Input Signal Sensitivity |
>100mV |
| Interface |
RS232 |
| Baud Rate |
9600 |
| Parity |
None |
| Data bits |
8 |
| Stop bits |
1 |
| General Specifications |
| Input Voltage |
110V and 220V selectable |
| Input Power |
18 watts |
| Dimensions |
5.6"(W) x 3.0"(H) x 10.5"(D) |
| Weight |
4.34 lbs |
| Accessories |
Operating manual, BNC cable w/ Alligator clips and AC power cord |
;)
