|
Protek 9301 Waveform Generator
Click Image to Enlarge
Protek 9301
|
- Log, linear, phase continuous sweeps
- Frequency to 31MHz
- 0.01µHz frequency resolution
- 16 to 16K points arbitrary waveform lengths
- Standard waveforms: Sine, Square, Triangle, Ramp and Noise
- Includes waveform design software
- Waveforms may be designed via front panel or software
- Sweep times to 1000s
- AM, FM and phase modulation
- RS-232 and software interface
|
| Model |
Description |
List Price |
Sale Price |
| 9301 |
1Ch. Synth. Function/Arbitrary Wave Form Generator, Also see our special on the Protek 9302 - Discontinued - replaced by Protek 9302 |
| Waveforms |
| Waveforms |
Sine, Square, Triangle, Ramp Noise, Abitrary |
| Frequency |
| Sine and Square |
0.01µHz to 31MHz |
| Ramp and Triangle |
0.01µHz to 2MHz |
| Noise |
10MHz |
| Output |
| Output |
9301: 1CH
9302: 2CH |
| Output Volts |
20mV to 20V P-P, no load 10mV to 10V P-P, into 50W |
| Resolution |
3 digits |
| Best Accuracy |
Sine wave: ±0.2dB (1µHz to 20MHz)
Square Wave: ±3% (0.01µHz to 100kHz)
Ramp, Triangle and Arbitrary: ±3% |
| DC Offset |
| Offset |
0 to ±10V (no load)
0 to ±5V DC (50W load) |
| Resolution |
3 digits |
| Accuracy |
±1.5% + 0.2mVDC |
| Sine Wave |
| Sine Wave Spectral Purity Spurious |
< -50dBc (non harmonic) |
| Phase Noise |
< -50dBc in a 30kHz band |
| Subharmonics |
< -50dBc |
| Harmonic Distortion |
-45dBc: DC to 1MHz
-32dBc: 1kHz to 31MHz |
| Square Wave |
| Rise/Fall Time |
< 15ns from 10 to 90% of full amplitude |
| Asymmetry |
< 1% of period + 4ns |
| Overshoot |
< 5% |
| Ramp, Triangle and Arbitrary |
| Rise and Fall Time |
<35ns |
| Settling Time |
<1µs |
| Linearity |
±0.5% FS |
| Arbitrary Waveforms |
| Standard |
Sine, Square, Triangle, Ramp, DC, Exponential Fall, Noise, Freehand, Line, Damped Sine |
| Sample Rate |
40MS/s (Max) |
| Waveform Length |
16 to 16,384 points |
| Amplitude Resolution |
12 Bit |
| Phase |
| Range |
9999.99° |
| Resolution |
0.01° |
| Rate |
0.001Hz to 10kHz |
| Frequency Modulation |
| Source |
Internal |
| Waveforms |
Sine, Square, Ramp, Triangle, Ramp, Arbitrary |
| Rate |
0.001Hz to 10kHz |
| Span |
0.01Hz to 31MHz (2MHz for Triangle or Ramp) |
| Amplitude Modulation |
| Source |
Internal or external |
| Waveforms |
Sine, Square, Ramp, Triangle, Arbitrary |
| Depth |
0 to 100% |
| Rate |
Internal: 0.001Hz to 10kHz; External: 20kHz Max. |
| Distortion |
< -35dB |
| DSB Carrier |
< -35dB typical at 1kHz modulation rate |
| Ext. Input |
5V for 100% modulation |
| Frequency Sweep |
| Type |
Linear or log, phase continuous |
| Waveforms |
Up, down, Up-down, Single sweep |
| Sweep Time |
100µs to 1000s (0.001Hz to 10kHz) |
| Span |
0.01µHz to 31 MHz (2MHz for Ramp and Triangle) |
| Markers |
Two markers may be set between any sweep point. Sweep Output - 0 to 10V linear ramp signal synchronized to sweep. |
| Burst |
| Waveforms |
Sine, Square, Triangle, Ramp, Arbitrary |
| Frequency |
2MHz Max for any waveform |
| Count |
1 to 65,000 cycles/burst |
| Phase Shift |
£100kHz |
| Trigger Generator |
| Source |
CH 1: Single, Int rate, Pos Ext, Neg Ext 1, Line
CH 2: Int CH 1, Int rate, Pos Ext 2, Neg Ext 2 (9302 only) |
| Rate |
100µs to 999.99s |
| External |
Positive or negative slope, TTL input |
| Output |
TTL Level |
| Timebase |
| Accuracy |
±3PPM (20 to 30°C) |
| Aging |
±3 PPM/Yr |
| Input |
10MHz/N ±2PPM where N=1 to 8.1V P-P Min. input level |
| Output |
> 1V P-P 10MHz sine wave into 50W |
| General Specifications |
| Interface |
RS-232 (baud rates from 2400 to 19.2k bps, DCE) and GPIB |
| Size |
14.0" W × 3.5" H × 13.5" D |
| Weight |
22 lbs. |
| Power Consumption |
46W (9301); 80W W9302) |
| Supplied Accessories |
Manual, Line cord, Software, BNC cable |
|
;)
