|
Protek 7800 Spectrum Analyzer Adapter
Click Image to Enlarge
Protek 7800
|
- 10MHz to 2.6GHz frequency range
- Advanced DSP design converts any 20 MHz or greater dual trace oscilloscope to a 2.6GHz spectrum analyzer
- Resolution Bandwidths to 3KHz and zero span
- LCD reads out Frequency and Amplitude
- Over 75dB of display range
- Internal Calibration Range
- On screen markers
- Ideal for testing AM, FM, CB, Cellular, Marine, Aircraft and Cable TV equipment
|
| Model |
Description |
List Price |
Sale Price |
| 7800 |
2.6GHz Spectrum Analyzer Adapter |
$2600.00 |
| $2236.00 |  |
|
|
|
| Range |
10MHz to 2.6 GHz |
| Resolution |
1KHz center frequency |
| Stability |
±10ppm |
| Span |
Zero span, 2kHz, to 100 MHz/ Div in a 1-2-5 sequence |
| Resolution Bandwidth |
3kHz, 30KHz, 220KHz, 4MHz |
| Resolution Bandwidth Accuracy |
±15% |
| Video Bandwidth |
1.6kHz typical (auto switched with RBW) |
| RF Sweep Rate |
20ms/Div |
|
|
|
|
| Input Level Range |
-100 dB to +20dBm |
| Usable Display Range |
75dB |
| Display Level Flatness |
±1.5dB at less than 10MHz /Div. |
| Display Range Linearity |
±1.5 dB over 70 dB range
(Resolution Bandwidth dependant) |
| Reference Level Range |
-30dBm to +20dBm |
| Reference Level Accuracy |
±1.5dB at 80 MHz ±1.5dB over +20 to -30dBm setting |
| Phase Noise |
-77dBc/ Hz at 30KHz offset |
| Average Noise |
-140dBm/ Hz (typical) |
|
|
|
|
| Impedance |
50W |
| Maximum Overload |
+30dBm for 1 minute max. |
| DC Block |
50 Volts DC |
|
|
|
|
| Power |
11VDC to 16VDC @ less than 1A |
| Power Consumption |
Less than 1A |
| Connectors |
RF input: Type N; Video and trigger output: BNC |
| Size |
3" H x 8.5" W x 10.0" D |
| Weight |
< 5 lbs. |
| Supplied Accessories |
Manual, 12 @ 1 amp AC/DC adapter |
|
|
;)
